200-301 Exam Questions

Lab Simulation 41 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Which architecture is best for Small offices with minimal wireless needs and no central management?

Which AP mode wirelessly connects two separate network segments each set up within a different campus building?

Which architecture supports centralized firmware updates and configuration for APs in different branch locations?

Lab Simulation 42 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Refer to the exhibit. What must be configured to enable WPA2 with AES encryption and fast roaming with a preshared key length of 64 characters?

Refer to the exhibit. An engineer was asked to update a wireless LAN controller configuration on a newly deployed SSID "Office." However, the configuration was not well documented...

How does MAC learning function?

A switch receives a frame with the destination MAC address 3C:5D:7E:9F:1A:2B. How does the switch handle the frame?

Which AP mode provides a wireless connection between two network segments?

When a 5 GHz wireless network is implemented using 20 MHz channels with no DFS, how many nonoverlapping channels are available?

Which interface configuration type is needed for a FlexConnect AP to support multiple WLANs using local switching?

Which switch port configuration must be configured when connected to an AP running in FlexConnect mode, and the WLANs use flex local switching?

Refer to the exhibit. Considering default routing protocol configurations were used, which routing protocol is used to learn the 10.255.2.2/32 route?

Refer to the exhibit. What is the value of the administrative distance for the default gateway?

Drag and Drop Question Refer to the exhibit. A packet is destined for 192.168.20.108. Drag and drop the parameters of the destination route from the left onto the routing table com...

Refer to the exhibit. Which routes are configured with their default administrative distances? (Choose two.)

Refer to the exhibit. Which interface does a packet take to reach the destination address of 10.10.10.14?

What is the difference between the TCP and UDP protocols?

Refer to the exhibit. What is the administrative distance for the advertised prefix that includes the host IP address 192.168.20.1?

Lab Simulation 43 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Lab Simulation 44 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Refer to the exhibit. Which routing protocol has the best administrative distance?

What differentiates the TCP and UDP protocols?

Drag and Drop Question Drag and drop the protocol advantages from the left onto the corresponding types on the right. Not all options are used. Answer:

Refer to the exhibit. With a reference bandwidth of 100 Gb on all routers, which path does router Y use to get to network 192.168.1.0/24?

Refer to the exhibit. The route for 10.227.150.160/27 has been very unstable. The same route has four backups to routers A, B, C, and D via the respective methods. The routing prot...

Refer to the exhibit. What is the metric associated with the route used to forward a packet received by the router destined for the IP address 172.20.0.222?

What is the primary purpose of the first hop redundancy protocols?

Refer to the exhibit. Which interface does a packet take to reach the host address of 192.168.18.16?

Refer to the exhibit. Which settings must be verified on workstation 1 to establish IP connectivity to server 1 using the server's fully qualified domain name?

Refer to the exhibit. OSPF neighbors routers A, B, C, and D are sending a route for 10.227.150.160/27. When the current route for 10.227.150.160/27 becomes unavailable, which cost...

Refer to the exhibit. PC Y is communicating with another device at IP address 10.227.150.193. Which router does router Y use to route traffic?

Lab Simulation 45 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Lab Simulation 46 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Which statement best describes the IPsec site-to-site VPN?

Refer to the exhibit. Inter-VLAN routing is configured on SW1. Client A is running Linux as an OS in VLAN 10 with a default gateway IP 10.0.0.1 but cannot ping client B in VLAN 20...

Lab Simulation 47 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Lab Simulation 48 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Refer to the exhibit. How does router R1 forward packets destined to 10.0.4.10?

Refer to the exhibit. What is the metric for the route learned via the External Gateway Protocol?

Refer to the exhibit. Of the routes learned with dynamic routing protocols, which has the least preferred metric?

Lab Simulation 49 Guidelines This is a lab item in which tasks will be performed on virtual devices. - Refer to the Tasks tab to view the tasks for this lab item. - Refer to the To...

Refer to the exhibit. How was the prefix 192.168.0.0/30 learned by the router?

Refer to the exhibit. During initial configuration testing, the Windows workstation PC1 cannot connect with the 172.16.2.0 /24 network. Which set of actions corrects the configurat...

Refer to the exhibit. What is the next hop for a packet destined for 10.1.1.1?

When OSPF learns multiple paths to a network, how does it select a route?

Refer to the exhibit. The loopback IP of R3 has been learned via the two interfaces on R1. R1 is configured with a reference bandwidth of 10 Gbps. Based on the metric calculations,...

Refer to the exhibit. The routers R1-LAB and R2-LAB are configured with link-local addresses. What command must be applied to interface Gi0/0 on R1-LAB for an automated address sel...

Refer to the exhibit. How will router R1 handle packets destined to 192.168.64.22?