300-815 Practice Questions

An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and outbound traffic. Which two items must be configu...

In Cisco Unified Communications Manager, which tool do you use to check SIP traces?

If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?

Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?

Refer to the exhibit. Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action...

The Cisco Unified Communications Manager Dialed Number Analyzer performs analysis of calls from which two devices? (Choose two.)

Refer to the exhibit. An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The adm...

In Cisco Unified Communications Manager globalized call routing is implemented and must confirm that it is correctly implemented without making a call. Which tool do you use for ve...

Which two statements about Cisco Unified Mobility are true? (Choose two.)

Refer to the exhibit. Which choice describes the purpose of the Cisco ASA 5505 firewall in this design?

Refer to the exhibit. A user dials 84969010 and observes that the call is not routed immediately. The administrator notices that after matching the fixed-length translation pattern...

Refer to the exhibit. DN 1003 was the last to ring during the most recent call. Which hunting method ensures that DN 1005 is presented with the next call when the hunt pilot is dia...

An administrator is implementing a new dial-plan on Cisco Unified Border Element. The administrator must ensure that incoming dial-peers are matched based on the IP address from wh...

A customer is using a SIP trunk to route calls to ITSP to decrease the possibility of downtime, the customer invested in a failover device How does the customer ensure reachability...

Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button. Which configuration parameter...

Refer to the exhibit. An engineer is troubleshooting an issue where inbound calls to Cisco UCM with early media fail to establish. While investigating the issue, the engineer finds...

CollabCorp is a global company with two clusters, emea.collab corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing betw...

Refer to the exhibit. While troubleshooting call failures on the Cisco Unified Border Element, an administrator notices that messages are being sent to the service provider, but th...

An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is lea...

Refer to the exhibit. How many maximum hops does an ILS update traverse?

An engineer must configure call queuing under a Hunt Pilot. After the engineer receives the audio file that will be played to callers during queuing, which two steps should be take...

Refer to the exhibit. An administrator has configured a SIP trunk between two Cisco UCM clusters. For calls that should use the trunk, the calls fail with a fast busy. The administ...

Refer to the exhibit. Regions have been configured for all major branches on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing t...

When a third-party SIP Phone System is dialed inbound across a Cisco Unified Border Element, DTMF is failing. The third-party vendor accepts only out-of-band DTMF. Which configurat...

A customer routes PSTN calls to its ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's...

Refer to the exhibit. For long-distance calls, users must prefix their dialed number with "91". The translation pattern was created to strip the 91 as the PSTN expects a 10-digit n...

When configuring hunt groups, where does the administrator add the individual directory numbers that should be part of the group?

A user requests a feature to send an active call to the mobile phone number on the physical phone. As an administrator, what should be configured in the Cisco UCM to accomplish thi...

Refer to the exhibit. ILS has been configured between two hubs this configuration. The hubs appear to register successfully, but ILS is not functioning as expected. Which configura...

Cisco UCM has 100,000 entries in the database learned through the ILS Service. Parameter ILS Max Number of Learned Objects in Database value is set to 100,000. What will happen to...

A user's phone is already configured for Single Number Reach, and the user wants a feature to move an active call from a mobile phone to a desk phone and vice-versa. As an administ...

The SIP session refresh timer allows the RTP session to stay active during an active call. The Cisco UCM sends either SIP-INVITE or SIP-UPDATE messages in a regular interval of tim...

A new deployment is using MVA for a specific user on the sales team, but the user is having issues when dialing DTMF. Which DTMF method must be configured in resolve the issue?

A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gat...

An engineer is configuring Cisco UCM to forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken...

Refer to the exhibit. An engineer is troubleshooting an issue with the caller not hearing a PSTN announcement before the SIP call has completed setup. How must the engineer resolve...

Users are reporting that several inter-site calls are failing, and the message "not enough bandwidth" is showing on the display. Voice traffic between locations goes through corpor...

An engineer must configure a Cisco UCM hunt list so that calls to users in a line group are routed to the first idle user and then the next. Which distribution algorithm must be co...

An administrator configured Cisco Unified Mobility to block access to remote destinations for certain caller IDs. A user reports that a blocked caller was able to reach a remote de...

Refer to the exhibit. An engineer is troubleshooting a call-establishment problem between Cisco Unified Border Element and Cisco UCM. Which command set corrects the issue?

Refer to the exhibit. Which change to the translation rule is needed to strip only the leading 9 from the digit string 91234548?

An engineer has temporarily disabled toll fraud prevention for SIP line calls on a Cisco CME12.6x and must enforce security and toll fraud prevention for the SIP line side on Cisco...

A company has users that are logged in to hunt groups. However, there is a requirement for hunt group configurations to provide an option to turn on audible ringtones when calls to...

Drag and Drop Question Drag and Drop the steps from the left into the order to provision mobility users through LDAP on the right. Not all options are used.

Drag and Drop Question Drag and Drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk...

Refer to the exhibit. A call made through the Cisco Unified Border Element to pilot 2000 is failing. What is causing the call to fail?

A company was looking at the IT charges and saw many long-distance and international calls primarily to sites in North America and around the world. The administrator wants to opti...

Refer to the exhibit. All calls from site A to site B are failing, and the issue has been identified as a media negotiation problem. Which configuration change resolves this issue?

Which set of commands binds SIP media and signaling to interface GigabitEthernet0/0 when dial peer 1 is chosen for call routing?

An administrator must control the number of calls to a remote specific site to reduce bandwidth constraints. The users on that remote site report bad quality of the calls passing t...