350-801 Exam Questions
580 real 350-801 exam questions with expert-verified answers and explanations. Page 6 of 12.
- Question #257On-Premises Call Control
A SIP phone has been configured in the system with MAC address 0030.96D2.D5CB. The phone retrieves the configuration file from the Cisco UCM. Which naming format is the file that i...
Cisco UCMSIP phoneConfiguration filePhone provisioning - Question #258On-Premises Call Control
Where in Cisco UCM are codec negotiations configured for endpoints?
Cisco UCMCodec NegotiationRegionsCall Control - Question #259Voice Gateways and Session Border Controllers
Refer to the exhibit. A call from +1 613 555 1234 that is sent out through the Nice Gateways should result in a calling party of 001 613 555 1234 with the numbering type "internati...
Voice GatewayNumber TranslationCalling Party TransformationInternational Dialing - Question #260On-Premises Call Control
Refer to the exhibit. Unanswered calls do not reach the voicemail associated with the phones Instead, callers receive the default greeting. Which action fixes the configuration?
SIP Trunk ConfigurationVoicemail IntegrationCall Diversion HeadersCisco Unity Connection - Question #261On-Premises Call Control
Callers from a branch report getting busy tones intermittently when trying to reach colleagues in other office branches during peak hours. An engineer collects Cisco CallManager se...
Cisco Unified Communications Manager (CUCM)Call Admission Control (CAC)Regions and LocationsTroubleshooting - Question #262Infrastructure and Design
An engineer implements a new Cisco UCM based telephony system per these requirements: - The local Ethernet bandwidth is sized based on the total bandwidth per call - A G.736 codec...
VoIP Bandwidth CalculationNetwork OverheadPacketizationG.736 Codec - Question #263On-Premises Call Control
Refer to the exhibit. A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?
Cisco UCMDHCP Server ConfigurationIP AddressingNetwork Services - Question #264Edge Services
Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?
Cisco ExpresswayMobile and Remote AccessFirewall ConfigurationSIP - Question #265Media and QoS
Which characteristic of distributed class-based weighted fair queueing addresses jitter prevention?
QoSClass-Based Weighted Fair QueueingJitter preventionTraffic classification - Question #266On-Premises Call Control
A company hosts a conference call with no local users. How does the administrator stop the conference from continuing?
Cisco Unified Communications Manager (CUCM)Conference Call ManagementService ParametersAd-hoc Conferences - Question #267Collaboration Applications
How many minutes does it take for automatic fallback to occur in a Presence Redundancy Group if the primary node lost a critical service?
Presence RedundancyCisco IM and PresenceHigh AvailabilityAutomatic Fallback - Question #268Media and QoS
Where in Cisco UCM is restrictions on audio bandwidth configured?
Cisco UCMBandwidth managementRegionsQoS - Question #269Voice Gateways and Session Border Controllers
A collaboration engineer adds a voice gateway to Cisco UCM. The engineer creates a new gateway device in Cisco UCM, selects VG320 as the device type and selects MGCP as the protoco...
Voice Gateway ConfigurationCisco UCMMGCP ProtocolGateway Identification - Question #270Protocols and Endpoints
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls. Which action resolves this issue?
Cisco UCMSIP SignalingEndpoint Security ProfileTroubleshooting - Question #271Edge Services
What is a capability of Cisco Expressway?
Cisco ExpresswayRemote AccessMRAUnified Communications - Question #272On-Premises Call Control
After an engineer implements the FAC and CMC features together, users report that calls take almost one minute to complete and that they occasionally hear the reorder tone. Which t...
FACCMCDial PlanInterdigit Timer - Question #273On-Premises Call Control
An administrator troubleshoots call flows and suspects that there are issues with the dial plan. Which tool enables a quick analysis of the dial plan and provides call flows of dia...
Dial PlanTroubleshootingCUCMDNA Tool - Question #274Call Control
A company's employees have been complaining that they have been unable to select options on the internal IVR of the help desk IT support has been given Cisco UCM traces and below i...
DTMFSIP SignalingIVRCisco UCM - Question #275Collaboration Applications
Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default?
Cisco Unity ConnectionCall HandlersDirectory HandlerUnified Messaging - Question #276Media and QoS
Refer to the exhibit. Which two codec permutations should be transcoded by this dspfarm? (Choose two )
Codec TranscodingDSP FarmVoice CodecsMedia Resources - Question #277On-Premises Call Control
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two)
Cisco UCMBATBulk AdministrationDevice TemplatesCSV - Question #278Endpoints and User Management
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series. The IPv4 address of the phone is reachable via ICMP and HTTP and the phone is registered to Cisco U...
Cisco IP Phone CLISSH ConfigurationCisco UCM Device SettingsEndpoint Troubleshooting - Question #279Media and QoS
What are two characteristics of jitter in voice and video over IP communications? (Choose two.)
JitterQoSVoIPPacket Delay Variation - Question #280On-Premises Call Control
Refer to the exhibit. An administrator configures a secure SIP trunk on Cisco UCM. Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomp...
SIP Trunk SecurityCertificate ValidationCisco UCMTLS - Question #281Voice Gateways and Session Border Controllers
An administrator works with an ISDN PRI that is connected to a third-party PBX. The ISDN link does not come up; and the administrator finds that the third-party PBX uses the QSIG s...
ISDN PRIQSIG signalingCisco IOS GatewayInterface configuration - Question #282Protocols and Endpoints
Which type of input is required when configuring a third-party SIP phone?
SIP Phone ConfigurationEndpoint AuthenticationSIP ProtocolThird-party Endpoints - Question #283On-Premises Call Control
Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution. On the Cisco UCM OS Administration page the new NTP server s...
NTPCisco UCMTroubleshootingOS Administration - Question #284Collaboration Applications
A company has an excessive number of call transfers to local and long-distance PSTN from Cisco Unity Connection voicemail. Which action in the Cisco Unity Connection restriction ta...
Cisco Unity ConnectionRestriction TablesVoicemail TransfersPSTN Outdial Control - Question #285Edge Services
What are two features of Cisco Expressway that the customer gets if Expressway-C and Expressway-E are deployed? (Choose two.)
Cisco ExpresswayRemote AccessFirewall TraversalCollaboration Edge - Question #286Infrastructure and Quality of Service
Which DiffServ marking is the most likely to drop packets?
DiffServAssured Forwarding (AF)QoSDrop Precedence - Question #287Voice Gateways and Session Border Controllers
An administrator needs to create a partial PRI consisting of the first seven timeslots available. Which configuration snippet configures the ISDN E1 PRI for this task?
ISDN PRIE1 ConfigurationVoice GatewayPartial PRI - Question #288On-Premises Call Control
A collaboration engineer configures Global Dial Plan Replication for multiple Cisco UCM clusters. The local cluster acts as the hub cluster and the remaining clusters act as spoke...
Global Dial Plan ReplicationCisco UCMIntercluster Lookup Service (ILS)Hub and Spoke - Question #289On-Premises Call Control
Which type of message must an administrator configure in the SIP Trunk Security Profile for a Message Waiting Indicator light to work with a SIP integration between Cisco UCM and C...
SIP MWIUnsolicited NOTIFYCisco UCM ConfigurationVoicemail Integration - Question #291Protocols and Endpoints
The IP phones at a customer site do not pick an IP address from the DHCP. An engineer must temporarily disable LLDP on all ports of the switch to leave only CDP. Which two commands...
LLDPSwitch ConfigurationNetwork ProtocolsCisco IOS - Question #292Infrastructure and Quality of Service
To provide high-quality voice and take advantage of the full voice feature set, which two access layer switches provide support? (Choose two.)
QoSVoiceAccess Layer SwitchesPacket Marking - Question #293Edge Services
A customer wants to conduct B2B video calls with a partner using an on-premises conferencing solution. Which two devices are needed to facilitate this request? (Choose two.)
Cisco ExpresswayB2B Video CallsEdge ServicesCollaboration Architecture - Question #294Edge Services
A company wants to provide remote users with access to its on-premises Cisco collaboration features. Which components are required to enable Cisco Mobile and Remote Access for the...
Mobile and Remote Access (MRA)Cisco ExpresswayUnified Communications ManagerRemote Access - Question #295Voice Gateways and Session Border Controllers
Refer to the exhibit. Cisco Unified Border Element is attempting to establish a call with Subscriber 1, but the call fails. Cisco Unified Border Element then retries the same call...
CUBESIP Trunk ConfigurationCUCM RedundancyCall Failure Troubleshooting - Question #296On-Premises Call Control
Refer to the exhibit. A collaboration engineer is configuring the Cisco UCM IM and Presence Service. Which two steps complete the configuration of the SIP trunk security profile? (...
SIP Trunk ConfigurationCisco UCMIM and Presence ServiceSIP Security Profile - Question #297Media and QoS
Refer to the exhibit. An engineer is troubleshooting this video conference issue: A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works. As soon as t...
Video conferencingBandwidth managementQuality of ServiceTroubleshooting - Question #298Protocols and Endpoints
If a phone needs to register with cucm1.cisco.com, which network service assists with the phone registration process?
DNSHostname ResolutionPhone RegistrationCUCM - Question #300On-Premises Call Control
What is a characteristic of a SIP endpoint configured in Cisco UCM with "Use Trusted Relay Point" set to "On"?
Cisco UCMSIP EndpointsTrusted Relay Point (TRP)Media Resources - Question #301On-Premises Call Control
Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers?
Cisco UCMCallManager GroupEndpoint RegistrationServer Priority - Question #302Voice Gateways and Session Border Controllers
Refer to the exhibit. A collaboration engineer adds an analog gateway to a Cisco UCM cluster. The engineer chooses MGCP over SCCP as the gateway protocol. Which two actions ensure...
MGCP GatewayCisco UCMGateway ConfigurationCall Control Protocols - Question #303Edge Services
What is the purpose of Mobile and Remote Access (MRA) in the Cisco UCM architecture?
MRACisco UCMCisco ExpresswayRemote Access - Question #304Edge Services
Which external DNS SRV record must be present for Mobile and Remote Access?
Mobile and Remote AccessDNS SRV recordsCisco ExpresswayExternal Connectivity - Question #305Voice Gateways and Session Border Controllers
When a call is delivered to a gateway, the calling and called party number must be adapted to the PSTN service requirements of the trunk group. If a call is destined locally, the +...
Number LocalizationCisco UCM Transformation PatternsVoice Gateway Dial-PeersPSTN Integration - Question #306On-Premises Call Control
A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result. Which two...
Cisco UCMToll Fraud PreventionCall RoutingOn-net/Off-net - Question #307On-Premises Call Control
An administrator configures international calling on a Cisco UCM cluster and wants to minimize the number of route patterns that are needed. Which route pattern enables the adminis...
Cisco UCMRoute PatternsDial PlanInternational CallingWildcards - Question #308On-Premises Call Control
A Cisco UCM administrator sets up new route patterns to support phones in four different locations, all with local gateways. The administrator wants to use the same route pattern f...
UCM RoutingLocal Route GroupsRoute PatternsGateway Selection