350-501 Exam Questions
562 real 350-501 exam questions with expert-verified answers and explanations. Page 10 of 12.
- Question #516Services
Refer to the exhibit. R1 and R3 have a pseudowire connection between them, which allows R2 and R4 to communicate via Layer 2. R2 uses VLAN 10. R4 also uses VLAN 10, but with a diff...
VLAN RewritingLayer 2 VPN (L2VPN)Cisco IOS XRPseudowire - Question #517Networking
Refer to the exhibit. A multinational corporation with a Cisco-based network wants to leverage Cisco security features to enhance the security of their LAN and protect against eave...
MACsec802.1AELayer 2 SecuritySwitch Security - Question #518Services
How does TACACS+ facilitate secure connections for user access to network routers?
TACACS+AuthenticationNetwork SecurityAAA - Question #519Networking
Refer to the exhibit. Which two features characterize remotely triggered black hole filtering? (Choose two.)
Remotely Triggered Black Hole (RTBH)DDoS MitigationNetwork SecurityTraffic Filtering - Question #520Networking
Company_A is implementing VoIP services across the company. The network architect designed a QoS policy to allow only specific IP subnets and mark the signaling flow with DSCP 36....
QoSDSCPACLVoIP Signaling - Question #521Services
Refer to the exhibit. Two midsize service providers are connected to each other and share VPNv4 routes. The service providers support customers in several geographic regions. The t...
Service Provider SecurityData Plane SecurityDDoS MitigationRTBH - Question #522Automation and Assurance
What is the primary purpose of Terraform in the network?
TerraformInfrastructure as CodeNetwork AutomationConfiguration Management - Question #524Automation and Assurance
A network engineer implements OSPF on the network and then notices frequent faults in traffic between two routers, particularly on interface TenGigE 0/0/0/1. The engineer decides t...
NetFlowNetwork MonitoringRouter ConfigurationTraffic Analysis - Question #525Automation and Assurance
Which wildcard is used with programmable APIs to Identify the values Cisco, Ciscotest, and CiscoSystems?
wildcardprogrammable APIsstring matchingdata filtering - Question #526Automation and Assurance
Refer to the exhibit. The networking team recently identified a folder of archived scripts in an internal repository. A junior engineer must determine whether any of the scripts ar...
Network AutomationData CollectionScript AnalysisDevice Information - Question #527Automation and Assurance
Refer to the exhibit. To generate detailed insights about network health, the networking team must enable telemetry for memory and CPU on all network devices using the templating a...
Model-Driven TelemetryTelemetry ConfigurationDial-in TelemetryNetwork Assurance - Question #528Automation and Assurance
Which capability does Secure ZTP provide?
Secure ZTPZero Touch ProvisioningNetwork AutomationDevice Provisioning - Question #529Automation and Assurance
Refer to the exhibit. A junior engineer must update a group of scripts to use on a newly deployed subnet. However, one of the scripts is not documented or commented. What are the t...
Network AutomationScriptingInterface ConfigurationFile Operations - Question #530Automation and Assurance
Which function does orchestrated fulfillment perform under the Cisco Network Services Orchestrator model?
Cisco NSOService OrchestrationNetwork AutomationConfiguration Management - Question #531Automation and Assurance
Network devices in the core layer use different iGPs, and the network is split into several areas. The engineer must use a NETCONF operation to toad a full interface configuration...
NETCONFConfiguration ManagementNetwork AutomationSecurity Protocols - Question #532Automation and Assurance
Why should a network administrator use YANG?
YANGNETCONFNetwork AutomationData Modeling - Question #533MPLS and Segment Routing
Refer to the exhibit. All edge routers are fully meshed via the iBGP and IS-IS routing protocols, and LDP is used for label distribution The network engineer must protect the TE tu...
MPLSLDPSession ProtectionNetwork Resilience - Question #534Networking
R1 serves as a route reflector on a BGP-enabled network and has dual RPs installed. To ensure that all routes have been processed when an RP fails over, R1 must send the router req...
BGPRoute ReflectorSSO/NSRRoute Refresh - Question #535Networking
Refer to the exhibit. A network engineer just upgraded the Cisco IOS XE Software to the newest version on OSPF routers R1 and R2, added the point-to-point network type under Gi0/0...
OSPF AdjacencyOSPF Network TypesOSPF TroubleshootingExstart State - Question #536Services
Refer to the exhibit. The network manager asked a network engineer to increase data-plane security on an Edge router connected to the internet with these requirements: - Allow inco...
Network SecurityAccess Control ListsTraffic FilteringRouter Security - Question #537Networking
Refer to the exhibit. A network operations team is implementing eBGP on the service provider network. Data traffic between routers R1 and R4 must use the R2-R3 link, which connects...
eBGPBGP PeeringLoopback InterfacesService Provider Routing - Question #538Networking
Refer to the exhibit. Company A has two offices that communicate via a service provider in AS 65516. CE1 arid CE2 provide connections to the service provider from site 1 and site 2...
BGPeBGPPE-CE RoutingAutonomous System - Question #539MPLS and Segment Routing
Which capability does RSVP provide in an MPLS network?
RSVP-TELSP SignalingMPLS Traffic Engineering - Question #540Services
What is a key capability of EVPN?
EVPNMultitenancyLayer 2 VPNLayer 3 VPN - Question #541MPLS and Segment Routing
Refer to the exhibit. A growing company with an increasing international presence requires a secure and scalable solution for inter-office data transfer across their geographically...
MPLS L3VPNVRFBGPRFC 4364 - Question #542MPLS and Segment Routing
After recent network outages and customer complaints, a large Tier 1 service provider has asked a network engineer to implement MPLS OAM policy on all Provider Edge devices in the...
MPLS OAMPerformance MonitoringPacket Loss DetectionNetwork Latency - Question #543Services
What is the primary purpose of containers in a service-provider virtualization environment?
ContainersVirtualizationApplication IsolationService Provider - Question #544Services
Refer to the exhibit. A network engineer with an employee ID: 5086:72:817 is configuring a connection to manage CE1 from the OAM server on VLAN 100. PE1 must push S-VLAN tag 10 tow...
VLAN taggingEthernet servicesService provider networksInterface configuration - Question #545Automation and Assurance
Refer to the exhibit. An operations team recently located an archive of scripts for deploying routine network changes with an error-free approach. A junior network engineer, who is...
RESTCONFNetwork AutomationAPI RequestsScripting - Question #547Automation and Assurance
Refer to the exhibit. The networking team must design a solution to provide as much detail about the network as possible. The network has almost 2000 network devices, including fir...
Network TelemetryModel-Driven TelemetrygRPCGPB Encoding - Question #548Automation and Assurance
A network engineer uses the REST NBI to configure routers in the network. Routers on the network are frequently assigned new process IDs as the network expands. The engineer alread...
RESTCONFNetwork AutomationAPI OperationsOSPF Configuration - Question #549Networking
Refer to the exhibit. The operations team is implementing a route-map policy. Traffic from source 192.168.30.1 must reach the customer network 192.168.1.1 via the secondary link R4...
BGPRoute-mapsLocal PreferencePolicy-Based Routing - Question #550Networking
Refer to the exhibit. R1 is connected to a server that is used by hosts residing on R3. The networking team decided to implement real-time traffic monitoring on the Ethernet link b...
Network MonitoringSNMPInterface ConfigurationTroubleshooting - Question #551MPLS and Segment Routing
Refer to the exhibit. A network engineer working for a private service provider with an employee ID 4234:67:945 is implementing LDP protocol changes on the client's network. What m...
LDPGraceful RestartMPLSControl Plane Persistence - Question #552Automation and Assurance
Which fact about programmable APIs should an engineering team consider when planning for a new network with Cisco devices
Programmable APIsREST APIJSONNetwork Automation - Question #553Networking
Refer to the exhibit. BGP is configured in the network. A network engineer must implement a route filtering policy to manipulate traffic flow between BGP peers. Traffic that matche...
BGP Route FilteringRoute-mapscontinue keywordPolicy Implementation - Question #554Networking
What is the purpose of the origin code in the bgp path selection algorithm?
BGPBGP Path SelectionOrigin CodeBGP Attributes - Question #555Networking
Refer to the exhibit. Site 1 and site 2 share routes using BGP. OSPF has been implemented within each site to share IP routes. A network engineer is implementing Graceful Restart o...
BGPGraceful RestartNSFSSO - Question #556MPLS and Segment Routing
Refer to the exhibit. IS-IS is configured in the service provider network. Data is shared between the customer branch offices via CE1 and CE2. The service provider engineering team...
MPLSLDP SynchronizationIGP-LDP InteractionPacket Loss Prevention - Question #557MPLS and Segment Routing
In a segment routing environment, how are segments distributed within the control plane?
Segment Routing Control PlaneSID DistributionLink-State IGP - Question #558Services
Refer to the exhibit. After network monitoring detected unusual traffic between CE1 and the file server, the network security team identified an attempted DDoS attack against the f...
DDoS MitigationRTBHService Provider SecurityBGP - Question #559Networking
Refer to the exhibit. The network is configured with OSPF. A networking team just connected a streaming multicast server to R7, and they now must enable access for users throughout...
Multicast RoutingPIM-DMNetwork ImplementationStreaming Services - Question #560Automation and Assurance
What is the primary purpose of RESTCONF when used with Cisco devices?
RESTCONFNetwork AutomationAPIDevice Management - Question #561Architecture
What is the feature of the Unified MPLS architecture?
Unified MPLSBGP Labeled UnicastLabel DistributionMPLS Architecture - Question #562Automation and Assurance
What are the four primary components of an API?
API ComponentsAPI StructureNetwork AutomationWeb Services - Question #563Networking
Refer to the exhibit. The company is running IS-IS in its core-A network engineer must segment the network into two areas to isolate departments. However, some networks must be sha...
IS-IS RoutingRoute FilteringArea SegmentationRoute Tagging - Question #564Networking
What is the main purpose of EVPN?
EVPNMultitenancyData Center NetworkingCloud Networking - Question #565Services
Refer to the exhibit. The network is running OSPF, and access to the internet is provided through router RB. Router RA connects to several servers that provide services to users co...
QoSTraffic ManagementCongestion MitigationNetwork Performance - Question #566Networking
Refer to the exhibit. CE1 and CE2 reside in AS 65516 and access the internet through PE1, which resides in AS 65517. The PE-CE routing protocol is BGP and CE1 and CE2 have an estab...
BGPMEDRoute MapTraffic Engineering - Question #567Networking
Refer to the exhibit. The network administrator must implement a new requirement that all traffic on the network that does not match a configured route map sequence should be dropp...
BGPRoute MapsTraffic FilteringPolicy Enforcement