300-610 Practice Questions

Refer to the exhibit. An engineer is creating a new data center design for a customer. The design must support virtual applications, enhance network resilience, and meet these requ...

A company wants to use the Cisco hyperconverged system in two data centers. The company plans to implement five HX servers in each data center, and there is no connectivity between...

A customer with a single data center wants to provide resiliency in the form of an additional hosting location. The customer's engineering team requested asynchronous replication f...

An engineer needs to design a network solution for a client-server farm that uses a pair of Cisco Nexus 9000 Series Switches that are configured with vPCs. Each server must connect...

A Cisco engineer is using a PowerShell script to create a service profile template on Cisco UCS Manager. After defining the server pools and other templates, the engineer must ensu...

An architect is gathering technical requirements for a large-scale data center with up to 3000 Ethernet ports and 70 ToR switches. The stakeholders agreed that if a ToR switch beco...

A SAN engineer needs to connect a Fibre Channel storage array to a Cisco MDS 9000 Series Switch by using an 8-Gbps interface. The switch must meet these requirements: - ensure stor...

An architect is designing a storage solution for a Cisco UCS server infrastructure with these requirements: - identical deployment of servers - can add vHBAs to a group of servers...

Refer to the exhibit. An engineer needs a solution to extend Fibre Channel traffic between multiple sites. The IPsec tunnels must be used to encrypt and secure the traffic. Which t...

Refer to the exhibit. A Cisco engineer is configuring Cisco Nexus 7000 Series Switches. To simplify initial configuration verification and vPC+/HSRP troubleshooting, the engineer c...

Refer to the exhibit. FCoE is used in the topology between the SAN Storage devices and SAN- Core routers. After noticing traffic drops to hosts accessing SAN-B storage, the enginee...

Refer to the exhibit. An engineer must deploy NEW-VRF-001 in the data center. All hosts require full reachability with all other hosts, no matter on which pod the host deployment o...

Which programming model is vendor-agnostic and combines operational and configuration data in the same container?

A network engineer needs to configure a high availability feature for a data center that uses a Cisco Nexus 7700 Series Switch that is configured with dual supervisors. The feature...

An engineer must design a solution with storage reachability between 100 physical servers and a storage array. The storage array connectivity is to a SAN switch that is limited to...

An engineer deploys a Cisco UCS environment with the storage array directly attached to the Fabric Interconnects. The operations team mandates that the solution must not require th...

Refer to the exhibit. A Cisco engineer is configuring a Cisco UCS integrated infrastructure for SAP HANA that consists of 8 x Cisco UCS B/C480-M5 servers for SAP HANA and 4 x Cisco...

A large financial institution hosts all customer data in a critical data center with a single physical location. Top management is concerned about the risk of a single-site failure...

To help automate the vHBA configuration process, a network engineer is configuring vHBA template pairs on UCS. The engineer is creating primary and secondary templates to define ho...

Refer to the exhibit. An engineer builds a data center network design using EVPN technology. Within the design, the fabric acts as a gateway. Traffic from host X to host Y must pas...

Refer to the exhibit. A Cisco engineer is configuring a data center design scenario with Cisco MDS 9000 Series Switches. The cut-through routing mode is chosen for improved read op...

An engineer must connect a Cisco UCS Fabric Interconnect to a storage array using a Fibre Channel protocol. The SAN must be directly connected to the UCS fabric interconnects using...

An enterprise is experiencing transmission errors and excessive delays over their WAN when backing up user workstations. A systems architect decided to resolve the problems by cent...

Refer to the exhibit. A Cisco engineer is planning a data migration job in heterogeneous SANs where the existing and new storage devices for the migration are already connected to...

Refer to the exhibit. Fiber links are provisioned directly between the spine and leaf switches in the given LAN topology. A /30 prefix has been configured over each fiber link to p...

A midsize corporation with significant data-storage requirements is planning to deploy RFC 3720- based technology in its data center to provide efficient and reliable block-level s...

A Cisco engineer is analyzing a customer environment where dozens of VMs are running on a physical server and UCS chassis are cascaded. The setup uses two ISLs in a port channel to...

An engineer needs to design a network environment in a data center that uses Cisco Nexus 9000 Series Switches The solution must meet these requirements: - interoperate with 802.1D...

An engineer working for a private data center with an employee ID 4947.57 424 designs a storage area network solution. The requirement is to apply QoS to ensure that Fibre Channel...

A network architect is designing a storage network to connect to an existing IP network over 100G Ethernet ports for multiple hosts. The architect decided to require iSCSI multipat...

Refer to the exhibit. A network engineer must improve high availability within the given UCS infrastructure. The engineer configured central nodes A and B in cluster mode to ensure...

A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning. The automation mu...

A networking team must implement a new management solution for the network devices at their organization. The solution must meet these requirements: - It must enable seamless monit...

A Cisco engineer is discussing a data center design scenario that consists of 24 Cisco UCS B200M6 Wade servers, 2 Cisco UCS 6454 Fabric Interconnects, and 3 Cisco UCS 5108 server c...

A company's data center is currently running on a traditional SAN architecture with Cisco UCS C200 M5 Blade Servers, producing 1000 IOPS. The SAN is becoming a performance bottlene...

A network engineer needs to design Layer 2 connectivity for a subnet between two data centers using VXLAN with Cisco Nexus switches. The engineer must ensure seamless host mobility...

Refer to the exhibit. Two Cisco Nexus 9000 Series Switches exchange OSPF routing information with R1. Which action accomplishes this goal?

A network engineer must design a high-performance, lossless Ethernet network to support AI workloads in a data center. The network uses a spine-leaf topology with Cisco Nexus 9000...

A data center with high network-traffic demands is facing challenges related to link throughput, with recent reports of significant traffic congestion and performance degradation....

Refer to the exhibit. A company must implement a multitenant environment for DEV and PROD application teams. The design must support end-to-end route isolation for remote external...

The network engineering team at a large corporation operates a critical data center with stringent business requirements for network reliability and high availability. EIGRP is use...

A company is planning to improve the segmentation of its data center network to isolate traffic of different clients across various parts of the facility. The solution must be high...

An international corporation migrates its primary and secondary data centers to Cisco ACI. The new architecture must include a disaster recovery solution for critical applications...

A network engineer must design a UCS SAN configuration for vNIC port eth0, which is currently configured directly via the adaptor. The engineer set the Connection Policies option t...

An AI/ML team is designing a fraud-detection model for an online banking application. The system must be able to handle a high volume of transaction data, and the models must be tr...

An organization deploys Cisco UCS-X Series servers in the data center. The deployment must have optimal BIOS configuration to maximize performance for memory-intensive applications...

An enterprise recently provisioned multiple new servers in their data center using service profile templates on Cisco UCS. Server 2 now requires two additional vNICs. How must the...

An engineer must complete vNIC and vHBA allocations for 16 new servers. All servers currently have the same requirements, but the company wants to be prepared for a future update t...

Which vNIC/vHBA Placement policy should be selected in Cisco UCS Manager to ensure that only dynamic and static vNICs and vHBAs are explicitly assigned to the policy?

An engineer must create a solution for server deployment in a multitenant UCS environment with UCS Central. The solution must: - Make use of centralized WWPN and IP pools. - Define...