HPE7-A01 Exam Questions

You need to drop excessive broadcast traffic on an ingress port or an ArubaOS-CX switch. What is the best feature to use for this task?

A company recently upgraded its campus switching infrastructure with Aruba 6300 CX switches. They have implemented 802.1X authentication on edge ports where laptop and loT devices...

A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authent...

You are deploying Aruba CX 6300's with the customers requirement to only allow one (1) VoIP phone and one (1) device. The following local role gets assigned to the phone port-acces...

For an Aruba AOS10 AP in mixed mode, which factors can be used to determine the forwarding role assigned to a client? (Select two.)

You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and...

Which statements are true regarding a VXLAN implementation on Aruba Switches? (Select two.)

A customer is concerned about me unprotected traffic between an AOS-CX switch and a gateway, running on AOStO. What is a feasible option to protect this traffic?

What does the 802.3bz standard describe?

When configuring UBT on a switch what will happen when a gateway role is not specified?

Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer. Which technology should you implement?

A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings. After receiving Access-Accept from the RADIUS server, the Aruba G...

You are are doing tests in your lab and with the following equipment specifications: - AP1 has a radio that generates a 16 dBm signal. - AP2 has a radio that generates a 13 dBm sig...

With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

Your customer currently has Iwo (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution. What would you explain regarding the Aruba...

With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. How do you automate the process of resuming the port operational state once a loop on a client port is cleared?

Drag and Drop Question Match the appropriate QoS concept with its definition. (Options may be used more than once or not at all.) Answer:

Drag and Drop Question Match the topics of an AOS10 Tunneled mode setup between an AP and a Gateway. (Options may be used more than once or not at all.) Answer:

Drag and Drop Question Match each PoE power class to Its corresponding 802.3 standard. (Options may he used more than once or not at all) Answer:

Drag and Drop Question Match the topics with the underlying technologies (Options may be used more than once or not at all.) Answer:

Drag and Drop Question List the firewall role derivation flow in the correct order. Answer:

Which network components communicate using the RADIUS protocol for authentication and accounting?

A company is in the planning stages to migrate to all their wireless domain laptops from WPA2 from WPA2 EAP-PEAP to EAP-TLS with machine Authentication. The administrator is testin...

In an AOS-10 architecture using an AP. a gateway and traffic forwarding mode * mixed, what happens when a client connects to an open enhanced 5SID where their VLAN assignment will...

A company with 10,281 employees recently deployed new HPE Aruba Networking Access Points at different branch offices. Wireless 802.IX authentication will be against a RADIUS server...

What are key differences between 802.11 wireless and 802.3 Ethernet? (Select two.)

A user is unable to obtain an IP address automatically. What should be checked first?

Which of the following is a major difference between 802.11 wireless and 802.3 Ethernet?

What are two important metrics for network performance monitoring? (Select two.)

A user reports that they cannot connect to the network. Which command should be used first to check connectivity?

Which of the following are common cybersecurity threats? (Select two.)

How does TACACS+ differ from RADIUS in authentication services?

Drag and Drop Question Match the solution components of HPE Aruba Networking Central NetConductor (Options may be used more than once or not at all.) Answer:

How do you allow a new VLAN 200 for downstream access switch with VSX pair using VSX LAG?

Refer to the output from a CX 6100 switch: What is the correct detail that can be observed from the output above?

Which statements are true regarding a VXLAN Implementation on HPE Aruba Networking switches? (Select two.)

Which of the following can cause wired network connectivity issues? (Select two.)

How do User Experience Insight (UXI) sensors improve network monitoring?

What are the primary components of an 802.1X authentication framework? (Select two.)

Refer to the exhibit. In the Core-2 configuration of spanning-tree instance 2 priority 0, what needs to be configured to enable the root for VLAN 20 while VLAN 10 remains root on C...

With the CX 6000 48G switch with uplinks of 1/1/47 and 1/1/48, what does the switch do when a client port detects a loop and tx-disable parameter is used?

Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution. What would you explain regarding the AOS-CX...

You are setting up a customer's 150 headless loT devices that do not support 802.1 X. What should you use?

AppRF 2.0 allows you to:

You are proposing new CX 8360 VSX switches to replace a customer's existing core switches. The customer is concerned about the possibility of a split-brain scenario between the VSX...

Which standard supported by some HPE Aruba Networking APs can enable a customer to accurately locate wireless client devices within a few meters?

A customer has several hundred wireless loT devices and is looking for an authentication solution that meets the following requirements: Which solutions will address the customer's...

You are proposing new CX 8360 VSX switches to replace a customers existing core switches. The customer Is concerned about the possibility of a split-brain scenario between the VSX...

Your manufacturing client is deploying twenty headless scanners in their warehouse. These new devices do not support 802.1X authentication. How does the gateway determine the devic...

When setting up an AOS-CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?