HPE7-A01 Exam Questions

You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency. What is the best scheduling technology to use for this task?

How do you allow a new VLAN 100 between VSX pair inter-switch-link 256 for port 1/45 and 2/45?

A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores Which standard uses Round Trip Time...

What are two advantages of splitting a larger OSPF area into a number of smaller areas? (Select two)

A customer is looking for a wireless authentication solution for all of their loT devices that meet the following requirements: - The wireless traffic between the IoT devices and t...

For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?

Which component is used by the Aruba Network Analytics Engine (NAE)?

A customer wants to provide wired security as close to the source as possible The wired security must meet the following requirements: - allow ping from the IT management VLAN to t...

Which statements are true about VSX LAG? (Select two.)

Which statements regarding OSPFv2 route redistribution are true for Aruba OS CX switches? (Select two.)

A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3. All legacy d...

Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to only have Web Ul access to the System > Log page and only have...

With Aruba CX 6300, how do you configure ip address 10.10.10.1 for the interface in default state for interface 1/1/1?

Your customer is interested in hearing more about how roles can help keep consistent policy enforcement in a distributed overlay fabric. How would you explain this concept to them?

Which statements regarding Aruba NAE agents are true? (Select two )

What is used to retrieve data stored in a Management Information Base (MIB)?

You need to have different routing-table requirements With Aruba CX 6300 VSF configuration. Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a s...

Refer to Exhibit. With Access-1, what needs to be identically configured With MSTP to load- balance VLANS?

Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to View switch configuration information and have access to the P...

How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?

With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

What is a primary benefit of BSS coloring?

Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was...

With the Aruba CX 6000 24G switch with uplinks of 1/1/25 and what does the switch do when a client port detects a loop and the do-not-disabie parameter is used?

You must ensure the HPEAruba network you are configuring for a client is capable of plug-and- play provisioning of access points. What enables this capability?

Which standard supported by some Aruba APs can enable a customer to accurately locate wireless client devices within a few meters?

A customer wants to deploy a Gateway and take advantage of all the SD-WAN features. Which persona role option should be selected?

Refer to Exhibit. A company has deployed 200 AP-635 access points. To take advantage of the 6 GHz band, the administrator has attempted to configure a new WPA3-OWE SSID in Central...

Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication. How c...

You are doing tests in your lab and with the following equipment specifications: - AP1 has a radio that generates a 20 dBm signal - AP2 has a radio that generates a 8 dBm signal -...

With the Aruba CX 6200 24G switch with uplinks or 1/1/25 and 1/1/26, how do you protect client ports from forming layer-2 loops?

You are working on a network where the customer has a dedicated router with redundant Internet connections. To outbound high-importance real-time audio streams from their datacente...

You are implementing ClearPass Policy Manager with EAP-TLS for authenticating all corporate- owned devices. What are two possible solutions to the problem of deploying client certi...

A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again. What is the best way to avoid having...

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

Your customer has four (4) Aruba 7200 Series Gateways and two (2) 7000 Series Gateways. The customer wants to form a cluster with these Gateways. What design consideration would pr...

By default, Best Effort is higher priority than which priority traffic type?

You need to drop excessive broadcast traffic on an ingress port or an ArubaOS-CX switch. What is the best feature to use for this task?

A company recently upgraded its campus switching infrastructure with Aruba 6300 CX switches. They have implemented 802.1X authentication on edge ports where laptop and loT devices...

A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authent...

You are deploying Aruba CX 6300's with the customers requirement to only allow one (1) VoIP phone and one (1) device. The following local role gets assigned to the phone port-acces...

For an Aruba AOS10 AP in mixed mode, which factors can be used to determine the forwarding role assigned to a client? (Select two.)

You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and...

Which statements are true regarding a VXLAN implementation on Aruba Switches? (Select two.)

A customer is concerned about me unprotected traffic between an AOS-CX switch and a gateway, running on AOStO. What is a feasible option to protect this traffic?

What does the 802.3bz standard describe?

When configuring UBT on a switch what will happen when a gateway role is not specified?

Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer. Which technology should you implement?

A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings. After receiving Access-Accept from the RADIUS server, the Aruba G...

You are are doing tests in your lab and with the following equipment specifications: - AP1 has a radio that generates a 16 dBm signal. - AP2 has a radio that generates a 13 dBm sig...