350-601 Exam Questions

Refer to the exhibit. An engineer must create a Python script using the Cisco NX-API CLI to retrieve BGP information from a Cisco Nexus 9000 Series Switch. Which code snippet compl...

An engineer installed the group of 93180YC-FX3 Cisco Nexus 9000 Series Switches. The engineer must use the Cisco NX-OS nxos64-cs.10.2.4.M.bin as a software image. The engineer uses...

Which protocol is used by a Cisco NX-OS device to send telemetry data encoded in JSON?

Which component is managed by the user in the PaaS model?

Which protocol does Cisco NX-OS use for data encoding in streaming telemetry?

A network engineer must prevent loops from occurring on a Cisco Nexus 9300 Series Switch when new switches are connected. The interface Ethernet1/2 must be used for host connectivi...

An engineer must back up the running configuration of a Cisco Nexus 9000 Series Switch securely to a remote server. Which protocol must be used to accomplish this goal?

What is the result of this idle-time 3 command? Nexus9K_1(config)# tacacs-server host 10.10.1.1 test username user1 password Ur049Gd0BH54A49a35350sg9 idle-time 3

Refer to exhibit. Three operational endpoints are under the same application EPG. All endpoints can communicate with each other. The fabric must be configured to prevent communicat...

What is the DHCP snooping bindings file shown here used for by the Cisco Nexus 9000 Series Switch?

Refer to the exhibit. User1 and User2 are connected to VTEP1 switch. The users can reach the WEB server. The monitoring tool shows degrading network performance and excessive traff...

Refer to the exhibit. A network engineer must configure the network to disable an interface when it exceeds the limit of learned MAC addresses. Which action accomplishes this goal?

Refer to the exhibit. Two Cisco Nexus 9000 Series Switches are connected using the interface Ethernet1/1. Which command must be configured under interface Ethernet1/1 to configure...

Refer to the exhibit. An engineer must configure SPAN to monitor the traffic sent to the server. The copied traffic must be sent to the network analyzer. Which configuration on N9K...

Refer to the exhibit. An engineer implements a VXLAN pod deployment with the vPC. During an upgrade of switches in POD1, Leaf102 starts to rejoin the vPC pair. Also, traffic to and...

An engineer must analyze packets arriving from a server port on a Cisco Nexus 9000 Series Switch. The packet sniffer is located on a different switch from the one the server is cur...

Which upgrade type must be used to patch a known hardware problem or improve the functionality of modular Cisco Nexus 9000 Series Switches?

An engineer must configure a role-based access control in Cisco Unified Computing System Manager to provide access to a network analyst. The analyst must configure syslog servers a...

How does a modular Cisco Nexus 9000 Series Switch handle an in-service software (ISSU) upgrade as compared to a nonmodular switch?

An engineer must back up the Cisco UCS Manager configuration to a remote server. The backup job must meet these requirements: - The backup must use the TCP protocol and be secure....

A network engineer must implement Cisco HyperFlex in remote sites with a localized workload in each site. Which solution must be used to support the two-node Cisco HyperFlex Edge s...

An engineer configures multiple blade servers for OS installation. The requirements are to use the internal HDDs inside the Cisco UCS blade server and for the OS to remain operatio...

What happens when the install all epld bootflash: m9000-pkg2-9.2.2.epld module all fan- module all bar all command is run on the Cisco MDS 9000 Series Director Switch?

A service profile in Cisco UCS Manager must be configured with these requirements: - Cisco UCS Manager must identify the interfaces on the VMware ESXi host that connect to the Cisc...

A network engineer must erase the startup configuration of a Cisco Nexus 9000 Series Switch including boot variable and interface management IP address. Which two commands must be...

The server fails to boot from a storage array. Which configuration enables Cisco UCS Manager to monitor the ports?

A network engineer must deploy a Cisco HyperFlex solution across two data centers. One of the data centers is in Europe and the other is in Australia. The setup must provide data p...

Which storage appliance must be deployed to provide file system access using the NFS protocol?

Refer to the exhibit. An FCoE-attached storage connects to a Cisco Nexus 9000 Series Switch on interface ethernet1/12. After the configuration was performed, VSAN 200 failed to act...

An engineer must configure FCoE for a server that is connected with a Converged Network Adapter (CNA) to a Cisco Nexus 9000 Series Switch. The setup must meet these requirements: -...

Which Cisco Nexus Dashboard feature analyzes flow telemetry data that is streamed from a Cisco Nexus 9000 Series Switch?

Refer to the exhibit. A network engineer must use a Cisco on-box Python CLI to configure the BGP AS 65501 on Cisco Nexus 9000 Series Switch. The output from the command must be ret...

Refer to the exhibit. An engineer prepared the configuration of OSPF in a text file named OSPF.txt. The engineer decided to remove all OSPF configurations. Which Python code must b...

Refer to the exhibit. Which port type must be used to complete the configuration of a monitoring session that sends traffic to a monitoring device?

Refer to the exhibit. The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 to N9K1 and N9K2 and N9K3 are forming the OSPF neighborship over a...

Refer to the exhibit. An engineer analyzes a Wireshark packet flow between a PC and a DHCP server. What occurs in the packet flow?

Refer to the exhibit. An engineer must create a scheduler task on a Cisco Nexus 9000 Series Switch at 06:00 AM. The task must save the running configuration to a file in the bootfl...

Refer to the exhibit. An engineer is troubleshooting a connection issue from the virtual machine that is located on the WebServer 1 blade. The application team requested a packet c...

Refer to the exhibit. A Cisco VXLAN fabric must detect when a VM with an IP address of 11.0.0.100 moves between servers. The engineer must also unfreeze the endpoint. Which command...

Refer to the exhibit. An engineer must configure NX-1 to accept only packets that exist in the routing table with the 9.9.9.2/32 source IP address and that are reachable via interf...

An engineer is configuring a Switched Port Analyzer (SPAN) session on a Cisco Unified Computing System to monitor traffic from the network adapter of a UCS chassis and send the mon...

Refer to the exhibit. An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become iso...

An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

Which product includes prebuilt templates that are available to be used to customize fabric deployments?

Which statement describes the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation?

Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?

Which two statements describe modifying Cisco UCS user accounts? (Choose two.)

An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action enables fabric redundancy?

An engineer is converting a Cisco MDS switch to support NPIV mode. What should be considered when implementing the solution?