200-301 Exam Questions
1,744 real 200-301 exam questions with expert-verified answers and explanations. Page 21 of 35.
- Question #1029IP Connectivity
A network engineer is upgrading a small data center to host several new applications, including server backups that are expected to account for up to 90% of the bandwidth during pe...
Traffic EngineeringRoute SpecificityWAN RoutingBandwidth Management - Question #1030IP Connectivity
Refer to the exhibit. A network engineer executes the show ip route command on router D. What is the next hop to network 192.168.1.0/24 and why?
IP routingRouting tablesAdministrative distanceRouting metrics - Question #1031Network Access
Refer to the exhibit. A Cisco engineer creates a new WLAN called lantest. Which two actions must be performed so that only high-speed 2.4-Ghz clients connect? (Choose two.)
Cisco WLAN configuration802.11g radio policySSID management - Question #1032
What is the role of nonoverlapping channels in a wireless environment?
Wireless channelsNon-overlapping channelsRF interferenceWi-Fi basics - Question #1033
A router has two static routes to the same destination network under the same OSPF process. How does the router forward packets to the destination if the next-hop devices are diffe...
Static routesECMPRouting tablePacket forwarding - Question #1034IP Connectivity
Refer to the exhibit. Which two values does router R1 use to determine the best path to reach destinations in network 1.0.0.0/8? (Choose two.)
Router Path SelectionLongest Prefix MatchRouting Metrics - Question #10351.0 Network Fundamentals
Refer to the exhibit. Host A switch interface is configured in VLAN 2. Host D sends a unicast packet destined for the IP address of host A. What does the switch do when it receives...
Ethernet switchingMAC address tableFrame forwardingUnknown unicast - Question #1036
A network analyst is tasked with configuring the date and time on a router using EXEC mode. The date must be set to January 1, 2020 and the time must be set to 12:00 am. Which comm...
Router configurationCisco IOSClock settingsEXEC mode - Question #1037IP Connectivity
Refer to the exhibit. A network engineer started to configure two directly-connected routers as shown. Which command sequence must the engineer configure on R2 so that the two rout...
OSPF configurationOSPF neighbor adjacencyCisco IOS commands - Question #1038
Refer to the exhibit. A network engineer must provide configured IP addressing details to investigate a firewall rule issue. Which subnet and mask Identify what is configured on th...
SubnettingIP AddressingInterface Configuration - Question #1039
Refer to the exhibit. What does route 10.0.1.3/32 represent in the routing table?
Routing table interpretationCIDR /32Host routes - Question #1040
Refer to the exhibit. A network administrator must permit traffic from the 10.10.0.0/24 subnet to the WAN on interlace Seria10. What is the effect of the configuration as the admin...
Cisco ACLsACL applicationInterface configuration - Question #1041IP Services
What is the role of community strings in SNMP operations?
SNMPCommunity stringsNetwork management security - Question #1042
Which access point mode relies on a centralized controller for management, roaming, and SSID configuration?
Access Point modesWLAN controllers - Question #1043Network Fundamentals
What are two characteristics of a small office / home office connection environment? (Choose two.)
SOHO networkingbroadband routernetwork environment characteristics - Question #1044IP Services
Which syslog severity level is considered the most severe and results in the system being considered unusable?
syslog severity levelslogging - Question #1045Security Fundamentals
What is the definition of backdoor malware?
backdoor malwaremalware types - Question #1047IP Connectivity
Which command creates a static NAT binding for a PC address of 10.1.1.1 to the public routable address 209.165.200.225 assigned to the PC?
Static NATCisco IOS commands - Question #1048
What prevents a workstation from receiving a DHCP address?
STPDHCPLayer 2 protocolsNetwork connectivity - Question #1049
What is a feature of TFTP?
TFTP - Question #1050IP Services
Which QoS forwarding per-hop behavior changes a specific value in a packet header to set the class of service for the packet?
QoS markingClass of Service - Question #10514.0 IP Services
Which per-hop traffic-control feature does an ISP implement to mitigate the potential negative effects of a customer exceeding its committed bandwidth?
Traffic policingQoSBandwidth management - Question #1052
Which remote access protocol provides unsecured remote CLI access?
TelnetSSHRemote CLI access - Question #1053
What is a syslog facility?
Syslog facility - Question #1054IP Services
What is the function of FTP?
FTPApplication Layer Protocols - Question #1055IP Services
How does TFTP operate in a network?
TFTPNetwork ProtocolsData Transfer - Question #1056
Which device performs stateful inspection of traffic?
Stateful InspectionFirewall - Question #1057Security Fundamentals
How does WPA3 improve security?
WPA3 securityWireless authenticationSAE protocol - Question #1058Security Fundamentals
Which device separates networks by security domains?
firewallnetwork securitysecurity domainsnetwork devices - Question #1059Network Access
Which enhancements were implemented as part of WPA3?
WPA3Wireless securitySAEForward secrecy - Question #1060Automation and Programmability
In an SDN architecture, which function of a network node is centralized on a controller?
SDN architectureSDN controllerControl plane centralizationRouting decisions - Question #1061Security Fundamentals
Which management security process is invoked when a user logs in to a network device using their username and password?
AuthenticationNetwork Security FundamentalsAAA - Question #1062
Which port security violation mode allows from valid MAC addresses to pass but blocks traffic from invalid MAC addresses?
Port securityPort security violation modesMAC address filtering - Question #1063ERROR: Official Exam Domains list was not provided
A customer wants to provide wireless access to contractors using a guest portal on Cisco ISE. The portal is also used by employees. A solution is implemented, but contractors recei...
Cisco ISEGuest portalPKI certificatesCertificate trust - Question #1064Network Access
A network engineer is implementing a corporate SSID for WPA3-Personal security with a PSK. Which encryption cipher must be configured?
WPA3-PersonalWireless SecurityEncryption CiphersSSID Configuration - Question #1065Automation and Programmability
Why would a network administrator choose to implement automation in a network environment?
Network automationConfiguration management - Question #1066Automation and Programmability
Which two REST API status-code classes represent errors? (Choose two.)
REST APIHTTP status codes - Question #1067Automation and Programmability
What is a function of a southbound API?
SDN southbound APINetwork programmabilitySDN controllerFlow control - Question #1068Automation and Programmability
Which script paradigm does Puppet use?
PuppetConfiguration ManagementIaC - Question #1069Automation and Programmability
Which set of methods is supported with the REST API?
REST APIHTTP methodsAPI fundamentals - Question #1070
Which definition describes JWT in regard to REST API security?
JWTREST API security - Question #1071Automation and Programmability
Which communication interaction takes place when a southbound API is used?
Southbound APISDN architectureSDN controller - Question #1072
What are two characteristics of a public cloud implementation? (Choose two.)
Public cloudCloud characteristics - Question #1073Networking Fundamentals / Network Services and Protocols - understanding how DNS resolution works end-to-end, typically covered in CompTIA Network+, CompTIA Security+, or similar foundational networking certifications.
Drag and Drop Question Drag and drop the steps in a standard DNS lookup operation from the left into the order on the right. Answer:
DNS ResolutionNetwork ServicesName Resolution ProcessRecursive DNS - Question #1074Automation and Scripting / Understanding Ansible architecture and core features for IT automation and configuration management
Drag and Drop Question Drag and drop the Ansible features from the left to the right. Not all features are used. Answer:
AnsibleAgentless AutomationConfiguration ManagementInfrastructure as Code - Question #1075IP Connectivity / IP Services - Understanding variable-length subnet masking (VLSM), subnetting, and matching learned routing prefixes to their correct subnet masks as seen in a routing table or dynamic routing protocol output (CCNA/CCNP Routing & Switching)
Drag and Drop Question Refer to the exhibit. Drag and drop the learned prefixes from the left onto the subnet masks on the right. Answer:
VLSMIP SubnettingRoute SummarizationOSPF/BGP Prefix Learning - Question #1076Network Access
An engineer is configuring a switch port that is connected to a VoIP handset. Which command must the engineer configure to enable port security with a manually assigned MAC address...
Cisco port securityStatic MAC addressSwitch port configurationVoice VLAN - Question #1077Cisco CCNA - Network Fundamentals / IP Services: Configure and verify DNS operations and hostname resolution on Cisco IOS devices, including static host mappings, domain lookups, and name-server designation (Exam Topic: IP Services - DNS)
Drag and Drop Question Drag and drop the DNS commands from the left onto their effects on the right. Answer:
DNS ConfigurationIOS CLI CommandsNetwork ServicesName Resolution - Question #1078Network Security - Understanding AAA (Authentication, Authorization, and Accounting) services and their functions in securing network access
Drag and Drop Question Drag and drop the statement about AAA services from the left to the corresponding AAA services on the right. Answer:
AAATACACS+Network SecurityAuthentication Authorization Accounting - Question #1079CompTIA Network+ / CCNA - Network Models and Protocols: Understanding the relationship between application-layer protocols and their underlying transport-layer protocols (TCP/UDP), including port numbers and protocol characteristics.
Drag and Drop Question Drag and drop the application protocols from the left onto the transport protocols that it uses on the right. Answer:
Transport ProtocolsApplication Layer ProtocolsTCP vs UDPNetwork Fundamentals