210-065 Practice Questions

A Unified Communications engineer wants to configure a Cisco TelePresence SX endpoint using static IP addressing to use a different TFTP server. Which path will allow the engineer...

Which two protocols can be used with the Cisco TelePresence Content Server to allow users to share content from their laptops? (Choose two.)

Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four.)

Which Cisco Video Surveillance device is responsible for providing video streams to monitors after the respective layouts and views are received by the monitors?

Which of these involves combining visual elements from separate sources into a single image?

Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two.)

Refer to the exhibit. You have just finished installing a 65-inch dual profile system in a multipurpose room. After powering up the entire system, only one display is used. Using t...

Threat monitoring in physical access security can be based upon which three of these? (Choose three.)

When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control?

Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC needs for the room where it is installed?

What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register w...

Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server for the SIP to function correctly? (Choose...

What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePre...

What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.)

Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways to accomplish this task? (Choose two.)

Which standard will support call forwarding?

Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)

Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints?

Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two.)

Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing confere...

Which Cisco feature upscales SD and low-bandwidth video participants up to four times, allows them to appear closer to HD in a video call, and is supported on Cisco MCU and Cisco T...

Which two of these support an ad-hoc conference call? (Choose two.)

Refer to the exhibit. Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls?

Which three features are supported by Cisco TMSPE? (Choose three.)

Refer to the exhibit. Which tab can be used in order to check the call statistics for the Cisco TelePresence Codec C60?

Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and co...

A network engineer wants to automate the monitoring of Cisco TelePresence TX systems. Which step should the engineer take first?

Refer to the exhibit. Which configuration item shown in the exhibit should be used to assign the internal and external video communication server address for this group of users?

A technician is tasked with performing a room readiness assessment in preparation for an immersive video endpoint. What are three Cisco best practices regarding lighting recommenda...

Refer to the exhibit. A network engineer configures a Cisco Unified Communications Manager and VCS integration via a SIP trunk. Endpoint A is able to conduct video calls to Endpoin...

Which three features does Cisco VCS provide? (Choose three.)

A technician has installed and powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The technician needs to determine the IP settings that were automatic...

The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded. Which codec CLI command could be used to check on the progress of the update?

A Cisco TelePresence VCS displays this alarm: "Root password is set to default." How can this security warning be addressed?

A large company wants to procure video conference devices that allow multipoint conferences from C-Series and immersive endpoints that are registered to a Cisco VCS and Cisco Unifi...

A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout v...

Management would like to set up a permanent recurring Cisco TelePresence meeting where the team would dial into to a preconfigured number. Which meeting type should be used?

When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three.)

Which of these is the core component of the Cisco Video Surveillance product suite that handles recording and serving of video feeds?

A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for th...

Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the cause. What is the menu path that the engineer should follow to capture and dow...

An engineer is creating a system backup on a Cisco VCS. Which two options describe characteristics of Cisco VCS backups? (Choose two.)

Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server?

Which four characteristics are associated with video? (Choose four)