HPE7-A07 Exam Questions
64 real HPE7-A07 exam questions with expert-verified answers and explanations. Page 1 of 2.
- Question #1
A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attribute: MAC address = 81 :cd:93:13:ab:31 The test device needs to be assigned the...
- Question #2
Refer to the exhibit. Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?
- Question #3
You configured a WPA3-SAE with the following MAC Authentication Role Mapping in HPE Aruba Networking Central Cloud Authentication and Policy: With further default settings, assume...
- Question #4
You are testing the use of the automated port-access role configuration process using RadSec authentication over VXLAN. During your testing, you observed that the RadSec connection...
- Question #5
An OSPF router has learned a path to an external network by both an E1 and an E2 advertisement. Both routes have the same path cost. Which path will the router prefer?
- Question #6
You recently added HPE Aruba Networking ClearPass as an authentication server to a group in HPE Aruba Networking Central. RADIUS authentication with Local User Roles (LUR) works fi...
- Question #7
Which data transmission method provides the most efficient use of airtime for VoIP traffic?
- Question #8
You deployed UBT to securely tunnel traffic from user desktop PCs connected behind VoIP phones. All other non-UBT clients are connected to a different network. After the deployment...
- Question #9
An ACME company employee complained about a recent poor-quality VoIP call while moving around their office environment. HPE Aruba Networking Central reported a fair UCC score for t...
- Question #10
The wireless administrator for a college campus is gelling reports of connectivity issues when students are working outdoors. Reviewing the settings above, watch change is needed t...
- Question #11
Refer to the CLI output below: What statement about the output above is correct?
- Question #12
Which statement is true given the following CLI output from a CX 6300?
- Question #13
You configured" a bridged mode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates. ClearPass show...
- Question #14
Refer to the exhibit. Which statement is true?
- Question #15
Refer to the exhibits. An engineer has applied the above configuration to R1 and R2. However, the router's OSPF adjacency never progresses past the "EXSTART/DR" state as shown belo...
- Question #17
Which command would allow you to verify receipt of a CoA message on an AOS-10 GW?
- Question #18
The ACME company has an AOS-CX 6200 VSF switch stack with an uplink over subscription ratio of 9.6.1 They have indicated that their low-priority TCP traffic has been flagged with a...
- Question #19
Refer to the exhibit. A university runs its own TV station in the city. The IT department deploys a multimedia server so the TV productions can be sent out to the entire campus ove...
- Question #21
A network administrator wants to configure an 802.1 X supplicant for a wireless network that includes the following: 1. AES encryption 2. EAP-MSCHAPv2-based user and machine authen...
- Question #22
A customer has recently deployed a wireless system using AP-535s to provide connectivity for their employees who are responsible for uploading large video files for review. The cus...
- Question #23
A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile based on best practices. Why do they have an equal split of their 144 A...
- Question #24
Refer to the exhibit. A customer is reporting mat connectivity is Tailing for some wireless client Devices. What are your conclusions from the capture? (Choose two.)
- Question #25
Which statements accurately describe OSPF Graceful Restart (when the restarting router is able to Keep its forwarding tables across the restart)? (Choose two.)
- Question #26
What directly affects the MCS used by wireless stations? (Choose two.)
- Question #28
A customer is running out of IP addresses in a network segment. What will happen if they add an additional IP subnet to the same VLAN?
- Question #29
In a WLAN network with a tunneled SSID, you see the following events in HPE Aruba Networking Central: The customer asks you to investigate log messages. What should you tell them?
- Question #30
A customer has deployed an AOS-10 mobility gateway cluster consisting of three controllers at a single site. The WLAN is configured to tunnel wireless device traffic to the AOS-10...
- Question #31
A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile based on best practices. What is a valid cause for having an equal spli...
- Question #32
A university owns a campus with several buildings segmented into east and west wings, which are L3 separated. The east wing has 1600 APs, and the west wing has 1200 APs. Each wing...
- Question #33
The ACME company has an AOS-CX 6200 VSF switch stack with an uplink over subscription ratio of 9.6.1 They have indicated that their low-priority TCP traffic has been flagged with a...
- Question #34
An AOS-10 multi-site deployment has sites with AP-only bridged SSIDs and other sites with APs and gateways operating tunneled SSIDs. Client session state sync errors exist between...
- Question #35
Your customer's employees connected to a wired network are complaining about a poor user experience. The customer has HPE Aruba Networking User Experience Insight (UXI) sensors dep...
- Question #36
A network technician racked up two 9240 mobility gateways in a single cluster that will be terminating 1700 APs in a medium-sized branch office. Next, the technician cabled the gat...
- Question #37
After onboarding three new AOS-10 gateways using the full-setup method into the same HPE Aruba Networking Central group, a customer cannot log in to one of the gateways using the H...
- Question #38
Refer to the exhibits. A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation. What can the network administrator concl...
- Question #39
You are deploying a new AOS-10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicatin...
- Question #40
Refer to the exhibit. After configuring VRRP between SW-1 and SW-2, you notice that both switches are showing as active. What could be the reason for this issue?
- Question #41
A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attributes: - MAC address = 81:cd:93:13:ab:31 - LLDP sys-desc = iotcontroller The te...
- Question #43
A BGP routing table contains multiple routes to the same destination prefix. Referring to the table below, which route would be marked with a ">" symbol?
- Question #44
You are troubleshooting a WLAN deployment with APs and gateways set up with an 802.1X tunneled SSID. End-users are complaining that they can't connect to the enterprise SSID. Which...
- Question #46
A customer is planning to add IoT devices that connect wirelessly to the existing 802.1 X SSID. The customer will use HPE Aruba Networking ClearPass to authenticate the IoT devices...
- Question #48
A customer reports that their HPE Aruba Networking ClearPass Guest captive portal is not functioning. The page loads but they are unable to browse after pressing connect. They have...
- Question #49
Refer to the exhibit. Which wireless connection phase has just been completed?
- Question #50
You configured a tunneled SSID with captive portal and an HPE Aruba Networking ClearPass Guest Self Registration workflow. When testing and launching the self-registration workflow...
- Question #51
A customer has deployed an AOS-10 mobility gateway cluster consisting of three controllers at a single site. The WLAN is configured to tunnel wireless device traffic to the AOS-10...
- Question #52
A Windows device attempts to connect to an 802.1X network but it is not receiving the correct role. TEAP has been configured as the only authentication method in ClearPass. The wir...
- Question #53
A customer would like to allow their IT Helpdesk to configure IoT devices to connect to a single SSID using a unique PSK that other devices cannot use. Which solution would you rec...
- Question #54
Refer to the exhibit. Which statement is true?
- Question #55
A customer with a gateway connected to a device on gigabitethernet 0/0/3 configures an Asset ID TLV on the device for inventory management. Refer to the exhibit. The customer menti...
- Question #56
A deployment using AP-635s is connected to a stack of CX 6300s as shown. The output of the show LACP interfaces shows the following: What is causing this issue?