HPE7-A06 Exam Questions

Which feature is supported on Ethernet Ring Protocol Switching (ERPS) ports?

An HPE Aruba networking ClearPass server needs to be added in the configuration where Downloadable User Roles (DUR) are used. What are the prerequisites for the AOS-CX Switch for D...

A client installed 655 APs in a project to upgrade the network in a large public venue. The customer states that they are having issues with the integration with the new sensor sys...

What is the best practice for using Dynamic Segmentation?

Refer to the exhibit. XYZ Company has deployed a multi-area OSPF AS where all the routers are operating an AOS- CX switches. Engineers want to join their proposed Area 3 to their e...

A network administrator wants to collect dumps for traffic sources or destined to a specific IP address. What is the simplest diagnostic command or commands on AOS-CX switches to a...

The customer is experiencing periodic uplink congestion between campus-1's AGG-1 and core. This has been negatively affecting voice communications. The VoIP phones edge mark packet...

You are implementing a network using Zero-Touch Provisioning (ZTP) to deploy the gateways. What are two requirements for the connection to the switchport? (Choose two.)

You have configured BGP peering from a CX 8325 switch to a third-party router. The remote router is reachable via ping but you are not able to get the configuration to an establish...

A network administrator is implementing a new VoIP solution. They want the AOS-CX switches to advertise the correct DSCP priority for the physical IP phones. Which switch features...

The administrator pf a large company noticed that there are some problems with UCC sessions on a wired network. Some employees complain about dropped calls and poor quality. The ad...

A user can connect to the wired network using 802.1X EAP-TLS but their traffic is being dropped after a certain time. What is the most likely cause of the traffic being dropped. (C...

Refer to the exhibit. Review the diagram and existing configuration of RouterA above. Which configuration changes are necessary to permit load balancing between RouterA and RouterB...

Refer to the exhibit. Company XYZ is using AOS-CX on Agg-1 and Agg-2. Both routers already have established eBGP connections as shown in the diagram but XYZ engineers are concerned...

With the configuration of two CX 8325 switches in the VSX cluster, how would you prepare a link- aggregation for a 7000 gateway for a zero-touch provision to support protocol-based...

You have a working MAC authentication solution for IoT devices using HPE Aruba Networking ClearPass and want to dynamically change the role of a device based on DHCP fingerprints....

An IT administrator wants to set up an HPE Aruba Networking User Experience Insight (UXI) sensor. During the initiation process, the administrator sees that the color of the LED is...

You are configuring an SSID which is using 802.1X as a security mechanism. What should be considered when deploying Wi-Fi 6E (6GHz) but maintaining compatibility with Wi-Fi 6 (5 GH...

A customer wants to tunnel tagged traffic from the VoIP phones to a central location. Which UBT mode should you configure?

A customer has configured 802.1X authentication with MAC authentication fallback and is complaining that printers are not accessible with the new configuration below. You can see a...

A hospital is using a multicast configuration on its network in a separate VLAN for the televisions in each room. Which feature prevents unwanted multicast on switches where it is...

An administrator is monitoring third-party WLAN transmitters in HPE Aruba Networking Central and some of them are classified as rogue and suspected rogue. How are rogue classified...

A customer has configured eBGP peering using local AS 65000 with two routers from a CX 6300 VSF stack to third-party routers with the following switch ports: [ports connecting to r...

A customer is experiencing problems with BGP on their AOS-CX network. The users cannot access specific resources on the network, even though they have been assigned the appropriate...

You are troubleshooting a network issue on a VSX cluster. The network was functioning properly yesterday but today the network operations center is receiving alerts. On one of the...

A user cannot connect to the wired network using 802.1X with EAP-TLS. The user's device is configured correctly and the user has a valid certificate. The RADIUS server logs show th...

You are configuring an SSID that is using PSK as a security mechanism. Why should you use WPA3-Personal with WPA3 Transition Mode disabled?

A client uses HPE Aruba Networking Central to manage and monitor wired and wireless networks. What are two advanced options in HPE Aruba Networking Central to troubleshoot wireless...

Which statements accurately describe OSPF Graceful Restart considerations? (Choose two.)

What is the maximum number of interfaces that can be active in the same LACP link on AOS-CX access layer switches?

Refer to the exhibit. During the update of the aggregation switches, Acc-1 clients were not able to receive multicast traffic for a few seconds. How can you improve the downtime fo...

A customer wants to deploy IoT security devices that are PoE-powered. Due to its criticality, it is required that those devices remain active, even during a switch software upgrade...

Refer to the exhibit. Based on the screenshot, what is required to bring the secondary switch MCLAG interfaces online?

When using the cable diagnostic feature on an AOS-CX switch to lest a 1000BaseT connection, what is the accuracy of 'distance to fault'?

You are configuring an HPE Aruba Networking Gateway Cluster with AOS-10. What is true about 802.1X functionality in combination with gateways? (Choose two.)

You want to use OSPF to advertise a only /16 summary route for the SVIs below to a neighbor in the same area (area 0). Which configuration will achieve this? A. B. C. D.

Refer to the exhibit. IGMP v3 was enabled on both VSX switches. Which switch becomes the IGMP querier for clients connected to Acc-1 switch?

Refer to the four numbered steps in the exhibit. Which action is the first step in applying the role-to-role ACL on the traffic from mobile device M1 to role H2?

When trying to add a new access switch to the network, the switch port at the aggregation switch is automatically disabled. What needs to be done to fix this issue?

Acme is having BGP issues with its AOS-CX switch and has asked you to help troubleshoot the issue. You have access to the CLI of the switch. Which command can you use to begin trou...

Two CX 8325 switches are configured as a cluster using VSX for the core role and two CX 6300M in VSF for the aggregation role. When a minor software upgrade is issued on the switch...

The client would like to automate the process of troubleshooting issues to have better visibility. Which solution would you recommend for your client?

Which is a best practice for configuring GBP?

You are about to deploy a gateway that is on factory default. ZTP cannot be used for different reasons, but you are searching for valid alternatives. What are two valid alternative...

Which minimal configurations must be completed for MSTP to work correctly? (Choose two.)

Network administrators are reporting that switches are taking a very long time to execute commands. Based on the configuration below, what is the most likely cause of the issue?

Applying the command "ip igmp snooping blocked VLAN 5,6" on port ...

A pair of CX 8325 series switches is configured in a VSX cluster. Which function is executed on both VSX members during normal operation?

Refer to the exhibit. An end-to-end QoS design needs to be implemented for wired and wireless. What is needed on the LAN side to maintain the correct DSCP tags?

Refer to the exhibit which illustrates the current configuration of Router-1. Clients of VLAN 10 require access to services hosted in the 10.1.100.0/24. This requires one or more r...