HP0-S35 Exam Questions
206 real HP0-S35 exam questions with expert-verified answers and explanations. Page 4 of 5.
- Question #158
Which Onboard Administrator features enables a range of dynamic IP addresses to be provides to the interconnect modules? HP HP0-S35 Exam
- Question #159
When installing a Modular Colling System (MCS) G2, which safely considerations must be implemented? (Select two)
- Question #160
Which HP resource provides information on energy and cooling based on utilization scenarios for an HP BladeSystem c-Class system?
- Question #161
What should be used to improve iSCSI performance especially for large block application?
- Question #162
Which HP storage systems are built on the HP ProLiant server platform? (Select two)
- Question #163
Before upgrading to a different Fiber Channel interconnect on a c3000 enclosure, which firmware revision level compatibility should you check?
- Question #164
During the initial set of an HP ProLiant Gen8 server using Agentless Management, where should you configure the SNMP Alert Destination?
- Question #165
Which HP tool allows you to assign a spare drive to an array on an HP Smart Array controller that is already configured?
- Question #166
In administrator is configuration a Server Deployment environment. What is the name of the unattended text file of the Windows 2008 installation?
- Question #167
A customer reports a large, abrupt decrease in SQL performance. What are the probable causes? (Select two.)
- Question #168
Which HP tool allows you to create a report of the complete firmware installed on an HP BladeSystem server?
- Question #169
Which Onboard Administrator feature ensures that the management processor in a server bay always has the same IP address?
- Question #170
A failed memory DIMM was replaced in a BL460c Gen8 Blade server. Which HP tool can be used to confirm that the failed DIMM issues has been resolved?
- Question #171
What must be configured after a BL460c Gen8 system board replacement? (Select two)
- Question #172
A customer adds memory into a single processor BL460c Gen8 server. After this additional it does not POST correctly. What are possible causes? (Select two)
- Question #173
A customer is interested in an HP Installation and Startup Service for a new HP BladeSystem c- Class environment. Which HP resource can you use to identify included services?
- Question #174
You are configuring HP Integrity Virtual Machines on an HP Inegrity BL8x0c i2 blade server system based on the Intel Itanium processor 9300 series. You plan to use the default 10 G...
- Question #175
Which services does HP offer to help you review current firmware levels and develop an appropriate management strategy? (Select two)
- Question #176
An engineer is installing ESXi 4.1 on an HP ProLiant G7 server using media obtained from Vmware. What does the engineer use to install the latest HP Common information Model (CIM)...
- Question #177
What should you before replacing a drive in a HP P4000 hot-swap storage system?
- Question #178
You are troubleshooting a specific problem on a Windows Server 2008 R2 need to quickly verify which Microsoft KB patches have been installed. How can you do this?
- Question #179
An engineer just installed an HP UPS R12000/3 to power protect an HP BladeSystem c7000 enclosure. The engineer wants to check the UPS and the UPS Management Card firmware levels Re...
- Question #180
A customer recently installed an HP Bl460c Gen8 server and configured agentless management from SIM v7.0. The customer is unable to configure Insight Control performance management...
- Question #181
Virtual Connect FlexFabric integrates seamlessly into any standard data or storage networks. HP HP0-S35 Exam What are some key features? (Select two)
- Question #182
The HP UPS Management Module (UPS MM) information forward through HP SIM 7.0 indicates redundancy loss of all attached devices when in Stand Alone (AS) mode. What might be the prob...
- Question #183
Which performance counter will confirm the need to add more physical memory in the VMware ESXi 5 host?
- Question #184
Where can you check the WWN of the blade servers that will be connected to external storage through flex fabric?
- Question #185
Investigating component failure on a proliant
- Question #186
In an HP ProLiant Gen8 server, which additional information does agentless Management Service Provide to the iLO Management Engine?
- Question #187
When investigating a component failure on a Proliant G7 server, which tool is available through the iLO to help determine the cause ?
- Question #188
All Production Systems are backed up every night at a specific time and backup is run concurrently to a locally attached tape library. which Concept does this represent?
- Question #189
What Happens to the iLO subsystems when upgrading the Intelligent Provisioning on a BL460c Gen8 ?
- Question #190
An HP c7000 Blade enclosure with 16 BL460c Gen8 servers has been installed. the newly installed hardware does not show in HP system Insight Manager. what should you run to correct...
- Question #191
Hardware events on a server, information from insight online is needed,which account used to access information?
- Question #192
After upgrading an existing system, a new baseline is needed. what are the options when using Version control Agent to select a managed baseline? (Select two)
- Question #193
An EBIPA is enabled for device and interconnect bays and all modules are set to use DHCP. which statement is correct?
- Question #194
A customer is running a VMware DRS cluster with vMotion enabled in a business critical production environment. Which Step should be performed before servicing an HP server blade th...
- Question #195
When placing c7000 enclosures in a dense environment, what placement helps avoid overheating?
- Question #196
A server is running out of disk space. it has a logical disk in external storage comprised of three, 72 GB disks in a Raid 5 configuration. No drive bays are available to add disks...
- Question #197
Which additional feature is bought to the GEN8 ilo3?
- Question #198
G7 processors installed on G8 servers
- Question #199
What is the minimum care pack level to sell if a customer wants the cheapest out-of-business hours support?
- Question #200
Where can you find what exactly is included in a installation services carepaq ?
- Question #201
Which tool can be used to set performance thresholds?
- Question #202
HP HP0-S35 Exam Which component is used to gather OS-related info? (WHICH ARE UNAVAILABLE TO ILO 4 ). ANSWER (SNMP TRAP FOR OS-RELATED INFORMATION)
- Question #203
Which additional feature is brought to the GEN8 iLO 4?
- Question #204
When adding a new user to hp sim, which credentials will be set or changed outside of hp sim?
- Question #205
What is called the concept of back up on a tape each night?
- Question #206
where can you check the WWN of the blade servers that will be connected to external storage through flex fabric?
- Question #207
What happens when you install a Gen 7 processors on Gen 8 servers.