HP0-S35 Exam Questions
206 real HP0-S35 exam questions with expert-verified answers and explanations. Page 3 of 5.
- Question #108
What needs to be installed so that Virtual Connect Manager 3.x or later can be used?
- Question #109
What is the maximum number of BL680c G7 servers you can instaqll in a c7000 rack enclosure?
- Question #110
What describes hot-aisle contaiment for rack placement in a data center?
- Question #111
An HP Blc 4x QDR InfiniBand switch is intalled in Bays 3 and 4 in a c7000 enclosure. What is the maximum number of downlink ports that it provides for connections to blade server?
- Question #112
Which enhancements were added to the HP iLO Management Engine of an HP ProLiant Gen8 server when compared to iLO3 (Select two)
- Question #113
A customer requires the onboard network ports on a ProLiant BL460c Gen8 Windows 2008 R2 server to be bonded together for improved performance and redundancy. What should be used to...
- Question #114
The customer wants to use a software RAID for the internal disk of the BL860c i2. What must be done?
- Question #115
Which features were added to the Hyper-V role in Windows Server 2008 R2? (Select two)
- Question #116
Which capability does UEFI provide in ProLiant Blade and other HP server? HP HP0-S35 Exam
- Question #117
In a DL380 Gen8 server fully populated with memory, which memory protection technology is able to correct an 8-bit memory error?
- Question #118
Which HP solution offers automated deployment and configuration of servers using scripting or imaging technology?
- Question #119
When using HP Insight Control Server Deployment, where should you change the network boot image from Linux to Windows?
- Question #120
All production system are backed up every night at a specific time, and the backup is run concurrently to a locally attached tape library. Which concept does this represent?
- Question #121
Which HP resource is used primarily by HP partners to check warranty information and part ordering?
- Question #122
Which tool can be used to determine the lifecycle status of DAS SSD disk in an HP ProLiant Blade server? (Select two)
- Question #123
You want to partner a D2200sb Storage Blade to BL620c G7 blade. The BL620c G7 blade is not able to see the D2200sb. What could be wrong?
- Question #124
Which items can be configured using the HP BladeSystem Insight Display? (Select two)
- Question #125
HP HP0-S35 Exam What should be done to allow Insight Remote Support to submit incidents to the HP Support Center?
- Question #126
What is different about the Intel processors in HP ProLiant G7 and Gen8 server?
- Question #127
Which UEFI shell command should be used to verify the firmware on the HP Integrity Blade LOMs and installed mezzanine card?
- Question #128
A technician wants to find local real-time hardware and firmware information about an HP ProLiant server. Which product should be used?
- Question #129
You are experiencing packet loss with low latency networks. Which value(s) should you customize so that the various HP SIM polling tasks complete in the shortest amount of time?
- Question #130
HP Ultrium Tape Blades offer a complete data disaster recovery and archiving solution for BladeSystem c-Class customer. Which HP branded packages are compatible with Ultrium Tape B...
- Question #131
As an administrator, you are required to monitor maximum CPU time on system processes on all nodes within your environment. What can happen when a threshold is crossed more than th...
- Question #132
Using HP Agentless Management, which components offer pre-failure alerting?
- Question #133
Which product should you use to turn the D2200sb into an iSCSI SAN for use by all servers in the enclosure and any server on the network?
- Question #134
Which file system is supported on the Vmware vSphere ESXKi 5 hypervisor host? (Select two)
- Question #135
You are requested to install a Virtual Connect FlexFabric module that must be connected to an HP StorageWorks 8/80 Brocade San Switch. You want to ensure the Virtual Connect module...
- Question #136
Which resource can be used to identify supported third-party SAN configurations for HP BladeSystem?
- Question #137
Which statement about HP Virtual Connect FlexFabric ethernet connectivity are? (Choose three.)
- Question #138
HP HP0-S35 Exam What is required to configure an HP ProLiant BL460c Gen8 memory in lock-step mode?
- Question #139
A customer needs many HP BladeSustem servers equipped with additional server option Which HP service should be recommended?
- Question #140
A customer has an HP BladeSystem c7000 environment and wants to add HP external storage. Which HP resources can be used to validate design and compatibility? (Select three)
- Question #141
Which log or report is used to verify the Memory Serial Presence Detect (SPD) information on a BladeSystem Gen8 server?
- Question #142
A customer has an LTO-4 tape drive connected to an HP DL380 server. The customer wants to integrate a new backup solution into an HP BladeSystem c7000 enclosure and maximize capaci...
- Question #143
A customer adds a BL460c G7 Blade to a c-Class enclosure with Virtual Connect (VC) installed, boot the server, and sets PXE on the second NIC in the ROM Base Setup Utility (RBSU)....
- Question #144
A customer's environment has Insight Remote Support. You just installed a new Windows server and discovered and configured it within the Insight Remote Support user interface. What...
- Question #145
You are at a customer site and need to add new VLANs to an existing Virtual Connect domain. THe Virtual Connect Manager displays a message that it is locked, and there is a do not...
- Question #146
An engineer reviews a Virtual Connect profile configuration and finds that all of the defined HP HP0-S35 Exam networks cards do not have mapping information. What could cause this...
- Question #147
You are preparing an intel based HP ProLiant Gen8 Server for installation of a hypervisor. Which advanced RBSU settings should be set? (Select two)
- Question #148
An administrator has just installed the latest service pack for Microsoft Windows Server 2008 R2. What else needs to be done to keep the server up to date?
- Question #149
You are creating an action plan to troubleshoot an inaccessible EVA LUN. Which steps should your action plan contain? (Select three)
- Question #150
You configured HP SIM to send email alerts if a system crashes in a LAN/WAN environment. You occasionally receive email alerts with false notification of an unreachable system, eve...
- Question #151
You are at a customer's site configuring two c3000 enclosure with Flex10 modules. Both enclosure are in the same room and will be hooked up to the same network switchies. The custo...
- Question #152
An HP Integrity BL870ci2 Blade Server running HP-UX 11u v3 incurs more cache errors from a processor than the threshould allows. Which statement is correct concerning the deallocat...
- Question #153
Which statements are correct about HP SmartDrive carrier authentication? (Select two)
- Question #154
HP HP0-S35 Exam Which HP tool is provided at no cost as part of HP Systems Insight Manager?
- Question #155
While analyzing a customer's business requirements, you learn that they would like to consolidate their interconnect equipment and allocate network bandwidth based on application r...
- Question #156
A customer wants an HP Care Pack to provides extended business hour support for hardware and software?
- Question #157
Two Virtual Connect FlexFabric modules are installed in a new HP BladeSystem c7000 solution. Virtual Connect Manager reports the domain as degraded and the stacking links failed. W...