300-425 Exam Questions

A network engineer is working on a predictive WLAN design. The new wireless network must support access to internet, email, voice, and the inventory database. To successfully suppo...

An engineer performs a Layer 1 survey by using Metageek Chanatyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAir AP?

During a wireless network design a customer requires wireless coverage on the perimeter of a building. But also wants to minimize signal leakage from the wireless network. Which an...

An engineer is designing a new wireless network. The network needs to meet these requirements: - support a high wireless client concentration - support data over wireless - support...

An engineer is using a Cisco AIR-2702i AP lo conduct a Layer l site survey. Which mode is selected for the AP to discover non Wi-Fi interference with Metageek Chanaryzer?

A network engineer is designing a new wireless network. The network needs to have these characteristics: - support high client concentration - optimize client performance - avoid i...

An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the u...

An engineer must perform an assessment of a customer LAN for a future IEEE 802.11 ac Wave 2 wireless deployment. All access switches are Fast Ethernet-capable only, and the wired i...

An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the Aps. The wireless clients should be a...

An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high co-channel interference. Which profile is used to adjust the parameters for these...

A customer called with a requirement that internal clients must be on different subnets depending on the building they are in All access points are operating in local mode and will...

Two Cisco 5520 Wireless LAN Controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy. A mobility gr...

An engineer must repurpose a lab WLC appliance for use in the production environment of the enterprise. After the new WLC is configured with the information of the other WLC, the m...

Refer to the exhibit. An enterprise has offices spread around the globe. The APs are connected to different controllers installed in separate datacenters. The IT team wants to allo...

Refer to the exhibit. An engineer determined that during a recent controller failure, some APs did not failover to their secondary controller based on the network design, which has...

A wireless engineer must design mobility between two buildings at a campus site. The engineer has one controller at each site. The engineer is investigating inter-controller CAPWAP...

An engineer has designed an anchor redundancy for guest clients connecting to SSID with auto- anchor configured. After adding a second Anchor WLC under the SSID mobility anchor lis...

An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the ser...

An engineer is configuring a centralized set of controllers for separate facilities. Which two Cisco wireless architectures must be used to ensure flexible sizing of WLAN to VLAN m...

A network engineer must design a new Cisco wireless solution that contains three Cisco 9800-40 WLCs. WLC1 and WLC2 will be combined into one logical unit with SSO and a backup WLC...

APs in a remote office recently have been converted from local mode to FlexConnect to take advantage of the local switching. After the change, remote wireless users report voice qu...

An enterprise is using a Cisco AireOS controller and Wi-Fi 6 APs. The controller is installed in the head office, and the employees primarily use Apple OS devices. The APs broadcas...

During a wireless design all APs are mapped to designated controllers in case of a failure. The controllers are located in the same data center but in different racks. An AP failed...

A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing. Which packet...

A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most c...

WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now show...

Refer to the exhibit. A WLC SSO pair is set up. Which failure scenario causes a split-brain scenario?

An AP is receiving 802.11 packets on its 802.11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to...

A customer is deploying an 802.11ac network on a floor to support approximately 300 wireless devices. Which setting must be changed on Cisco Prime Infrastructure Planning Tool to p...

An engineer added an AP to a deployment after a post-installation site survey. The engineer then notices an increase in co-channel interference and retransmissions. Which two featu...

When a wireless survey is conducted at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When Cisco Prime Infrastructure i...

While performing an AP-on-a-stick survey with a cell boundary of -67 dBm, an engineer is consistently reading SNR less than 15 dB in a particular area within the cell boundary. Wha...

An engineer must perform a Layer 2 survey for a mining facility. Which type of antenna does the engineer use in the mine shaft?

An engineer is designing a wireless network to support hyperlocation in an environment that already has APs installed. During the survey, the engineer notices that the APs are poin...

An engineer is performing an active survey of a network that must support different types of mobile devices. The devices must be able to run an application that requires a minimum...

An engineer must produce a passive survey report. The coverage heat map shows the entire site with all signal levels. To see only the desired coverage, which action must the engine...

An engineer is performing an AP-on-a-stick survey and finds that the 5 GHz channel overlap is too high when an appropriate number of APs are used for the density requirements. Whic...

An engineer is designing a point-to-multipoint mesh network. Which two AP configurations must be completed for a site survey? (Choose two.)

The wireless survey report shows APs staggered throughout a facility, with several of them placed on the exterior walls. Other APs are located at building corners and major turns i...

An engineer must perform a predictive design for a wireless network. The customer has devices that can tolerate at most 100 ms of delay when roaming. Which design criteria must be...

A wireless engineer must assess constraints for a future WLAN deployment for a site that consists of office cubicles. Which signal propagation attenuation result is associated with...

An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of 72dBm. Clients report frequent disconnections. What must be configured for the AP to guid...

An engineer must install an outdoor wireless network for an area with a direct line of sight. The outdoor APs are in an open area with a history of harsh weather. Which two paramet...

A customer has a central Cisco WLC that manages APs in FlexConnect mode. The wireless infrastructure supports multiple small branches. One branch deploys new CCX wireless phones th...

An engineer must identify the network requirements for a company that has a main office and 10 branch offices. The network must be able to support data, voice, video, and location...

During a meeting to gather the requirements for a new Wi-Fi network design, the customer requests that 802.11a and 802.11ac clients be able to connect. Which affect does this have...

A customer deploys a new Cisco high-density wireless network within the open areas of a mall to provide free public wireless on 5 GHz. The existing mall tenants have their own wire...

A new wireless network design has these requirements: - AireOS WLCs as guest anchors - a Cisco Catalyst 9800 Series WLC as the foreign controller - use of Wi-Fi 6 APs - inter-contr...

An engineer is designing a new wireless network. Based on the design, OfficeExtend AP functionality must be used. Which type of license must the Cisco 5520 WLC v8.3 have?

What is the wireless signal loss of large cases of liquid materials being stored in a warehouse environment?