NS0-184 Exam Questions

An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster. In this scenario, which tool would the administrator use to validate the configuration?

Which command would be used to measure the throughput and latency of traffic between nodes?

After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues. In this scenario, which NetApp tool wou...

You are using Broadcom BES-53248 switches for a cluster interconnect in a base configuration. In this scenario, what is the minimum number of ISLs supported between the switches?

You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both NFSv4.1 and SMB clients. The host operating systems have full flow control enabled o...

A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment. In this scenario,...

Click the Exhibit button. Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in ONTAP?

You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID grou...

Your customer is migrating data from a legacy FAS8020 system that runs ONTAP 9.5 software to a new AFF A250 MetroCluster over IP configuration. In this scenario, which two methods...

You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags. In this scenar...

You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow n...

You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric. In this scenario, which two tools would give insight into their existing Cisco MDS fabric con...

You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the...

Click the Exhibit button. You are installing a new AFF All SAN Array A700 HA pair. Referring to the exhibit, which IP address would have been used to join node 02 to the cluster du...

Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches. In this scenario, what...

Click the Exhibit button. You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After attempting to add the node, it fails as shown in the exhibit. What...

Click the Exhibit button. You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in th...

You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack. In...

You want to add an AFF A400 HA pair to an existing cluster. In this scenario, which LIF type is required?

You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to jo...

You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither "un-failing" nor reseating the drive he...

Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel repor...

You are installing a new six-node ONTAP 9.8 cluster. You have completed the initial configuration of the cluster interconnect switches and the ONTAP cluster. In this scenario, whic...

Your customer wants to know more about the network configuration within the cluster. In this scenario, which statement is correct about a LIF?

Click the Exhibit button. Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluste...

Click the Exhibit button. You want to add an AFF A400 system to an existing 4-node cluster. Referring to the exhibit, which number points to the ports that are used to cable the ne...

Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers. In this scenario, which two prerequisites should you examine in advance? (Choose two.)

You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration. Wh...

You are setting up a peer relationship between two ONTAP clusters. In this scenario, which two statements are true regarding authentication?

You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by "automatic port placement". In this scenario, which two ONT...

After the Installation of a new NetApp FAS system, you use theNetAppDocs tool for site design documentation. In this scenario, in which three document formats would you create an i...

You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the a...

When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes. What is required to complete this task...

Click the Exhibit button. Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The customer asks how many ports can be used for the Ethernet...

On which type of network interfaces are the cluster interconnect LIFs created?

A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing...

What should you do to change the data protocol of a LIF?

You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration informati...

What is the default shelf ID for disk shelves with IOM12 modules?

After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 is...

A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing...

Click the Exhibit button. A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade. Referrin...

Which logical interface has a fixed firewall policy?

Click the Exhibit button. During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array. Referring to...

You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency. Which two NetApp best practices shou...

You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to obtain the preinstallation information from the customer. In this scenario,...

Click the Exhibit button. Which set of components on a FAS9000 are highlighted in the exhibit?