N10-005 Exam Questions
952 real N10-005 exam questions with expert-verified answers and explanations. Page 13 of 20.
- Question #613Networking concepts
Which of the following network topologies would be the BEST choice in providing network redundancy for an organization?
mesh topologynetwork redundancytopology typesfault tolerance - Question #614Network operations
Which of the following network performance optimization methods allows for frequently accessed sites to be housed locally, thereby reducing bandwidth requirements?
caching enginesbandwidth optimizationproxy cachingWAN optimization - Question #615Network troubleshooting
A network technician suspects that there is an issue with the routing table on a Windows- based server. Which of the following commands will enable the technician to validate this...
routing tableroute printWindows CLInetwork commands - Question #616Network troubleshooting
During business hours, users at a small office are reporting that all of a sudden they are unable to reach any host on the Internet, but they can still use the network shares to tr...
Internet outagerouter failuregateway failurenetwork diagnostics - Question #617Network implementation
A small business owner is in the process of setting up a SOHO office. The office has only one connection to the Internet via a broadband cable connection. The office has four subne...
routerNATSOHO networkingsubnet routing - Question #618Network troubleshooting
Matt, an administrator, notices a flood fragmented packet and retransmits from an email server. After disabling the TCP offload setting on the NIC, Matt sees normal traffic with pa...
protocol analyzerpacket captureTCP offloadNIC troubleshooting - Question #619Networking concepts
Which of the following BEST describes how a layer 2 switch functions?
Layer 2 switchingMAC addressesswitch operationdata link layer - Question #620Network implementation
Jeff, a technician, has been asked to add a subnet to the company's LAN. Which of the following interfaces on the router will be modified?
router interfacesFastEthernetsubnet configurationrouter configuration - Question #621Network troubleshooting
Jeff, a network engineer, is troubleshooting an issue where clients are not receiving IP addresses from a new, properly configured DHCP server on another subnet. Statically address...
DHCP relayhelper addresscross-subnet DHCPDHCP troubleshooting - Question #622Networking concepts
Which of the following subnet masks would allow for 192.168.0.3 and 192.168.0.240 to be in the same subnet?
subnettingsubnet maskIP addressingCIDR - Question #623Network troubleshooting
Jeff, an administrator, has just finished installing a new switch and connected two servers with IPs of 192.168.105.20 and .30. The servers are able to communicate with each other,...
default gatewayVLAN configurationserver connectivityrouting - Question #624Network troubleshooting
Kim, a user, took a laptop on vacation and made changes to the configuration in order to use the device at the hotel. She can reach the Internet, but cannot access any internal net...
DNS configurationsplit-horizon DNSinternal resourcesVPN/remote access - Question #625Networking concepts
Which of the following is the default subnet mask for a Class B address?
Class B addressingdefault subnet maskIPv4 classessubnetting - Question #626Network security
Which of the following default ports would need to be disabled to block TFTP traffic?
TFTPdefault portsUDP 69firewall rules - Question #627Network security
Which of the following ports would Zach, a technician, need to open on a firewall to allow SSH on the default port?
SSHport numbersfirewall rulesprotocol ports - Question #628Networking concepts
Which of the following ports is the default telnet port?
Telnetport numbersprotocol ports - Question #629Network security
Which of the following ports would have to be allowed through a firewall to allow SNMP traffic to pass on its default port? (Select TWO).
SNMPport numbersfirewall rulesprotocol ports - Question #630Networking concepts
Which of the following has a maximum transfer rate of 54Mbps and operates at the 5GHz frequency?
802.11awireless standards5GHzdata rates - Question #631Network implementation
Kim, a network technician, is installing an 802.11n network. Which of the following should Kim enable to ensure that the network only allows 802.11n clients?
802.11nwireless compatibilitymixed modeaccess point configuration - Question #632Network implementation
Zach, a technician, is installing an 802.11n network. Which of the following should he disable to stop broadcasting the network name?
SSID broadcastwireless configurationaccess point - Question #633Networking concepts
Which of the following default services uses TCP/UDP port 88?
Kerberosport 88authentication protocolsprotocol ports - Question #634Network security
Which of the following ports should be allowed through a firewall to allow DNS resolution to occur to an outside DNS server?
DNSport 53firewall rulesname resolution - Question #635Networking concepts
Which of the following uses port 53 by default?
DNSport 53protocol ports - Question #636Networking concepts
Which of the following ports does DHCP use? (Select TWO).
DHCPport 67port 68protocol ports - Question #637Network security
Lisa, a network administrator, needs to allow all websites to be accessible by the sales team for business purposes. Which of the following ports need to be enabled on the firewall...
HTTPHTTPSport 80firewall rules - Question #638Network security
Lisa, a technician, is asked to not allow FTP traffic on a network. Which of the following ports should be blocked on the firewall to achieve this?
FTPport 21firewall rulestraffic filtering - Question #639Network operations
Which of the following ports are MOST commonly used to interactively configure a networking device? (Select TWO).
SSHTelnetnetwork device managementport numbers - Question #640Networking concepts
In order to reduce spam email, Kim, a network administrator, changes the standard SMTP port from which of the following port numbers to port number 587?
SMTPport 25email protocolsspam prevention - Question #641Network security
A company would like all HTTP traffic to filter through a proxy server on port 8080. Which of the following port numbers needs to be redirected through the proxy server to accompli...
HTTPproxy serverport 8080traffic redirection - Question #642Network security
A company wants to only allow incoming HTTP and HTTPS traffic on their public wireless network. Which of the following port numbers should be the only allowed open ports on the fir...
HTTPHTTPSfirewall rulesport filtering - Question #643Network security
An organization has installed a new firewall. Users need to have access to remote websites and must be able to use SSH to retrieve files from remote locations. Which of the followi...
SSHHTTPfirewall rulesTCP protocols - Question #644Network security
An organization recently installed a firewall on the network. Employees must have access to their work computer from their home computer. In which of the following ways should the...
RDPremote accessTCP port 3389firewall rules - Question #645Network security
An organization recently installed a firewall on the network. Employees must be able to send and receive email from a POP3 server. In which of the following ways should the firewal...
POP3SMTPemail protocolsfirewall rules - Question #646Networking concepts
Which of the following protocols uses port 3389?
RDPport 3389protocol portsremote desktop - Question #647Network security
Kurt, a network technician, has configured a new firewall on the network. Users are reporting errors when attempting to access several websites. Kurt attempts to access several pop...
firewall rulesHTTPSTCP port 443port filtering - Question #648Network troubleshooting
A network technician has configured a new firewall to allow TCP port 80 traffic and deny UDP traffic. Users have reported that they are unable to access Internet websites. The tech...
DNSUDP port 53firewall rulesname resolution - Question #649Network implementation
A network technician needs to address bandwidth issues on the wireless network. There are currently four 802.11n access points. The technician would like to increase the bandwidth....
802.11nchannel bondingwireless bandwidthaccess point configuration - Question #650Network troubleshooting
An administrator is receiving reports from an executive that the executive's wireless access point loses the signal frequently, even though the WAP is on the executive's desk. The...
wireless interferencechannel configuration802.11naccess point placement - Question #651Network implementation
A network technician needs to install an additional access point to the company's wireless network. The network has two 802.11b access points. Which of the following channels shoul...
non-overlapping channels802.11bwireless channelsaccess point overlap - Question #652Network implementation
Kim, a network administrator, is seeing workstations in building C authenticate to the building A wireless access point. Which of the following would resolve this issue?
transmission powerwireless coverageaccess point configurationroaming - Question #653Network security
An 801.11g wireless access point was configured as follows: - AP encryption forced to WPA2-AES mode only - MAC address filtering enabled with the following MAC address in the allow...
WPA2-AESMAC filtering802.11n compatibilitywireless security - Question #654Network implementation
Jeff, a business owner, has discovered that several of the nearby businesses have wireless networks. Jeff wants to implement a unique wireless network inside the business. Which of...
wireless channelinterferenceaccess point configurationco-channel interference - Question #655Network security
A company only wants preapproved laptops to be able to connect to a wireless access point. Which of the following should be configured?
MAC filteringwireless access controlaccess point securitynetwork access control - Question #656Network security
company wants the public to be able to connect to the wireless network with minimal security, but not be able to connect to the private internal network. Which of the following fir...
firewall rulesnetwork segmentationwireless guest networkpacket filtering - Question #657Networking concepts
Which of the following occurs when antenna gain is increased on an access point?
antenna gaincell sizewireless coveragesignal propagation - Question #658Networking concepts
Which of the following technologies allows more than two transceivers with an access point?
MIMOwireless transceivers802.11naccess point technology - Question #659Network security
Jeff, a customer, has a wireless network and has reported that the network traffic from the wireless access points seems high compared to the limited number of wireless devices use...
WPA encryptionMAC filteringwireless securityunauthorized access prevention - Question #660Network implementation
Kim, a technician, is configuring an 802.11n access point. Other WAPs on the network use 802.11b. Which of the following will Kim have to setup to make sure these WAPs will be able...
mixed mode802.11n802.11b compatibilityaccess point configuration - Question #661Network troubleshooting
Lisa, an administrator, has set up an 802.11n wireless network. Users with 802.11n laptops have reported that speeds are slow. After testing, Lisa determines that users max out at...
WMMQoS802.11n performancewireless speed optimization - Question #662Network implementation
Zach, a network administrator, needs to purchase a new switch to support VoIP phones and wireless access points in a new building. Which of the following features are the MOST impo...
PoEQoSVoIPswitch features