HPE6-A45 Exam Questions

Refer to the exhibit. [Image of Commander and Standby switches with failed backplane stacking links] An administrator created a backplane stack with the plug-and-play method, and d...

What is a reason to implement port security on an AOS-Switch?

Refer to the exhibit. radius-server key password radius-server host 10.1.10.10 dyn-authorization radius-server host 10.1.10.11 dyn-authorization AOS-Switches will enforce 802.1X au...

Network administrators want to gain insight into network utilization, traffic patterns, and the types of applications in use across the network over the long term. Which technology...

What is the purpose of the captive portal URL hash key on an AOS-Switch?

Administrators need to inspect all traffic that arrives on an AOS-Switch in VLAN 2 and is destined to TCP ports 50000-50010. They want to send the traffic to a protocol analyzer co...

A network administrator needs to configure PIM across several AOS-Switches in the same routing domain. What correctly describes how they can implement PIM modes?

Refer to the exhibit. [Image of network diagram with Switch-1, Switch-2, Area 0, Area 1, RIP, OSPF] Both Switch-1 and Switch-2 redistribute RIP routes into OSPF. The network admini...

A network administrator enters this command: Switch(config)# aaa authorization user-role enable How does this affect device authentication?

A company wants to implement RADIUS authentication of all managers who log in to AOS-Switches via SSH. The RADIUS server also sends VSAs that indicate which commands each user-role...

A company wants to implement role-based tunneled node on AOS-Switches. Which solution should be included in the plan to help apply the roles?

A company wants access layer switches that support routing, ACLs, backplane stacking, and Smart rate ports. The customer asks about Aruba 5400R z 12 Switches. What Aruba Switch mod...

Refer to the exhibit. Switch-1# show lini-keepalive Keepalive Status and configuration - Unidirectional Link Detection (UDLD) Keepalive Retries : 4 Keepalive Interval : 5000 ms Kee...

Refer to the exhibit. [Image of Commander and Standby switches with connections] A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2....

What must an OSPF router do when it receives a link state update?

A company has many AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. Wha...

A company has IP phones that are LLDP-MED capable. The exhibit allows to LLDP-MED. The administrator wants to automatically provision the configuration on the right leg as well. Wh...

What is the need for hello packets between two OSPF routers?

An AOS-Switch uses tunneled node. What is a best practice for the path between an AOS-Switch and its Mobility Controller?

The administrator needs to update the software on a VSF fabric with two Aruba 5406R switches. What can the network administrator do to minimize downtime during the update?

Traffic between the servers in Area 1 takes a less optimal path rather than the link associated with VLAN 1000, subnet 10.0.0.0/30. Based on the exhibits, why is this happening?

A company requires secure guest access via the captive portal URL, hash key on an AOS-Switch help to prevent?

A company follows AOS-Switches at the campus core. The switches: * Will act as the default gateways for several campus VLANS * Must provide redundancy for their servers and tolerat...

Endpoints in VLAN 2 connect directly to this switch. These devices should only be able to send DHCP, DNS, HTTP, and HTTPS traffic. However, they are able to send any traffic. Based...

A company possesses several Aruba 2930M switches, which the customer wants to combine into a single logical switch. What must be included in the proposal to meet this requirement?

A company SNMP policy requires: * Read-write access to AOS-Switches is controlled by SNMPv3 * Read-only access to AOS-Switches is permitted with SNMPv3 or SNMPv2c to support legacy...

OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this IP address, and to...

A network uses MSTP. How can the AOS-Switch loop protection feature enhance this network?

Network administrators need to determine if the QoS settings on their AOS-Switches still meet their needs. Interface 1 is a 1 Gbps interface. Assume that the interface needs to for...

An AOS-Switch runs IGMP in data-driven mode. What behavior does it exhibit?

An administrator created a backplane stack with the plug-and-play method and did not after the default backplane stacking settings. Later, who backplane stacking links failed as sh...

A network administrator needs to control traffic based on Ethertype and Class of Service. What should the administrator configure for this purpose?

A network administrator configures VSF settings on two Aruba 2930F switches. The switches form two separate VSF fabrics. What should the administrator do to fix this?

A network administrator needs to find the source of a performance issue. The administrator has seen that interfaces sometimes start to drop many packets, but the issue is intermitt...

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use PEAP MSCHAPv2. The administrato...

A customer wants access layer switches that support routing, ACLs, VSF stacking, and SFP+. Which Aruba switch model meets the customer's requirements?

A network administrator enters this command on an AOS-Switch: Switch#config# radius-server host 10.1.3.3 time-window 60 What behavior will the server show?

Administrators authenticate guests to ClearPass with captive portal. When guests first connect their device to the network, they are redirected to a captive portal in which they lo...

The routing switches shown in the exhibit use OSPF, and all of their interfaces are in Area 1. A faulty link on Switch-1 went up and down many times over the course of several hour...

Switch-2 and Switch-3 lost IP connectivity with each other. They did not detect the issue for several seconds and caused a temporary traffic disruption. The administrator implement...

A network administrator sets up PIM-DM to route traffic from the multicast source to clients in VLAN 24. The server begins to forward multicasts, and the clients are set up to rece...

A company has attempted to implement OSPF without success. The devices in Area 1 need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What...

How far do OSPF link state updates (LSUs) for Type 1 (Router) and Type 2 (Network) LSAs propagate?

A network administrator applies the ACL to Switch-2, as shown in the exhibit. Device-1, IP address 10.10.10.24, attempts to open an HTTP session with host 10.1.0.10.24. What happen...

A AOS-Switch has type of service disabled on it globally. The administrator enters: AOS-Switch(config)# interface 1 qos trust device aruba-ap What is the effect of this command?

A network administrator needs to configure VRRP on VLAN 2 on two AOS-Switches. Which two settings must match on both switches?

An Aruba user wants access layer switches that support routing, ACLs, VSF stacking, and SFP+. Which Aruba switch model meets the customer's requirements?

Which change to the environment would cause clients to fail to receive DHCP settings?

A company has a mixed wireless and wired Aruba solution. It wants to encrypt messages used to send configurations and other important messages to the APs and out-of-band to ClearPa...

Every switch shown in the exhibit is an AOS-Switch that runs PIM-SM. A network administrator wants to load-balance the RP role, so Switch-3 and Switch-4 both act as RPs for some of...