HPE0-S59 · Question #75
Drag and Drop Question Match HPE Superdome Flex system with its specific feature. Answer:
The correct answer is HPE Superdome Flex: Support for 32 sockets and 48TB of memory; HPE Superdome Flex: Support for nPAR with 16 sockets; HPE Superdome Flex: Maximum of 24TB memory; HPE Superdome Flex 280: Minimum of 768 GB of memory. HPE Superdome Flex Matching Question - Explanation Likely Typo Alert Before diving in: the "Correct Arrangement" as written has an internal contradiction. Items 1 and 3 both say "HPE Superdome Flex" but claim 48TB maximum and 24TB maximum for the same product - that's…
Question
Drag and Drop Question Match HPE Superdome Flex system with its specific feature. Answer:
Exhibit
Answer Area
Drag items
Correct arrangement
- HPE Superdome Flex: Support for 32 sockets and 48TB of memory
- HPE Superdome Flex: Support for nPAR with 16 sockets
- HPE Superdome Flex: Maximum of 24TB memory
- HPE Superdome Flex 280: Minimum of 768 GB of memory
Explanation
HPE Superdome Flex Matching Question - Explanation
Likely Typo Alert
Before diving in: the "Correct Arrangement" as written has an internal contradiction. Items 1 and 3 both say "HPE Superdome Flex" but claim 48TB maximum and 24TB maximum for the same product - that's impossible. Item 3 almost certainly contains a typo and should read HPE Superdome Flex 280. The explanation below treats it that way.
The Two Products at a Glance
| Feature | HPE Superdome Flex | HPE Superdome Flex 280 |
|---|---|---|
| Socket range | 4 – 32 sockets | 4 – 8 sockets |
| Max memory | 48 TB | 24 TB |
| Min memory | varies | 768 GB |
| nPAR support | Yes | Yes |
| Form factor | Rack-scalable | Smaller / fixed 4U |
Item-by-Item Breakdown
1. HPE Superdome Flex → Support for 32 sockets and 48TB of memory
The original Superdome Flex is the larger, modular system. It scales from 4 up to 32 Intel Xeon Scalable sockets by adding chassis nodes, and its memory ceiling reaches 48 TB. This is its defining differentiator versus the 280.
2. HPE Superdome Flex → Support for nPAR with 16 sockets
nPAR (node partitioning) is hardware-level partitioning that divides the server into fully isolated, independent systems. Because nPAR requires a minimum of 4 sockets per partition, a 16-socket configuration fits squarely inside the original Flex's range (max 32 sockets). The Flex 280 tops out at 8 sockets, so a 16-socket nPAR config is only possible on the original Flex.
3. HPE Superdome Flex 280 → Maximum of 24TB memory (question likely has a typo here)
The Flex 280 is the smaller, denser variant. Its memory ceiling is 24 TB - exactly half the original Flex. This is a key spec to memorize: 280 = 24TB max, original Flex = 48TB max.
4. HPE Superdome Flex 280 → Minimum of 768 GB of memory
The Flex 280 ships with a defined memory floor of 768 GB, reflecting its fixed smaller chassis. The original Flex's minimum varies with the number of chassis nodes added.
Common Mistakes to Avoid
- Confusing max memory: Students often assign 48TB to the 280. Remember: 280 = 24TB, original Flex = 48TB.
- nPAR socket counts: Seeing "16 sockets" and thinking it could be either product. The 280 maxes at 8 sockets, so 16 is only possible on the original Flex.
- Treating the 280 as a stripped-down product: The 280 still supports nPAR and enterprise RAS features - it's smaller, not inferior. The distinction is scale, not capability tier.
Topics
Community Discussion
No community discussion yet for this question.