HP2-Z12 Exam Questions

Which switch is specifically designed for networks that require basic connectivity and have little or no IT support?

On the HP Wireless Unified LAN Controller A3000G, what does the LED marked Mode indicate?

Which E Series switches require two power supplies to be completely operational? (Select two.)

What distinguishes an unmanaged HP V Series switch from a smart-managed HP V Series switch?

You are entering the operator password to access an HP E8212 zl switch's CLI. Which context do you enter?

Sometimes you need to support an HP V Series switch on which the power LED does not illuminate. Typically, you check power cords and the power outlet. Which additional step might a...

You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are recommended when installing the new power supply?(Select two.)

How do the HP 1410 switches differ from the HP V1905 switches?

When you assign an autonomous HP E Series AP an IP address, you typically assign it to a virtual port that applies the address to the AP's wireless functions and its Ethernet uplin...

You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the startup-config. You want to preserve your new configuration changes in the switch...

You are trying to remember the command for backing up the switch's startup-config. You know that the first element of the command isbackup, and you want to find out the next option...

Which HP V Series switch can connect to a redundant power supply (RPS)?

Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?

You are replacing an autonomous HP E Series AP on the customer's network. Which statement is true about the AP's IP address?

You are installing an HP V110 ADSL-A Wireless-N Router at a customer site. Where do you connect the AP' ADSL port?

What does the Module Active LED on the HP V1900-8G switch indicate?

Which device forwards network traffic based only on Layer 2 information?

You are configuring an HP E3500 switch using the CLI and want to assign the switch a unique host name to identify it on the network. You want to use the host command but cannot rem...

Which HP E Series wireless deviceis designed to be used outdoors?

A faulty configuration on an HP A Series switch locked a customer out of the management interface. You bypass the configuration and gain access to the switch's CLI.Your manager ask...

On HP A-MSR50 Series routers, which component holds the slots for Voice Processor Modules (VPMs)?

You log in to an HP A Series switch over a console session in order to establish IP connectivity between the switch and the rest of the network. What is the minimum user privilege...

Which IEEE 802.11 standard offers maximum theoretical data rates up to 600 Mbps?

A customer wants you to install a 9-Port 10/100 PoE DSIC in an HP A-MSR 50 Series router. Which requirement must the router meet?

You are at a customer site where one of the redundant power supplies on an HP E5406 zl switch has failed. How can you determine which power supply needs to be replaced? (Select two...

You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you perform? (Select two.)

Which statement about the deployment of HP E Series MultiService Mobility (MSM) APs is correct?

What do the HP E-MSM410 AP and the HP E-MSM415 RF Security Sensors have in common?

What information do all HP E Series APs provide through their LEDs? (Select two.)

Which LED behavior indicates that an HP V1910 Series switch port has failed?

You are replacing a failed HP A-WX5002 WLAN Access Controller. You want to configure the controller to rediscover the customer's A Series APs as quickly as possible. What should yo...

You are configuring the IP address and default gateway for an HP E2910 al switch from the CLI. After you finish entering the configuration, you issue the write memory command.What...

You have been dispatched to a customer site by the response center.You need to connect your laptop to the console port on the customer's HP E6600 switch to access the CLI. Which ap...

You are servicing an HP V1905-8-PoE switch and need to access the CLI. What should you consider in this situation?

You are servicing an HP A Series AP that operates in fat mode, and you need to enter commands in its CLI. On which HP A Series fat AP must you enter commands in a different syntax...

The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's status?

You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web browser interface in several different ways, but you are always prompted for creden...

Which cables are supported for a T3 or E3 connection? (Select two.)

LEDs on the HP E8200 zl switch and HP E5400 zl switch can provide what information about an installed HP E-MSM765 zl Mobility Controller?

How do you access the console port on an HP A5800-24G-PoE switch?

You are sent by the response center to install an HP E2610 switch at a customer site. After you install the switch in the rack and power it on, you connect to the CLI through the c...

You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as the main startup-config and has no backup config. What happens if you use the un...

Which statements are true about HP E Series APs that are reset to factory defaults? (Select two.)

If include-credentials has not been configured, how do you return an HP E5412 zl switch to factory default settings, including erasing the passwords?

On several HP A Series wireless devices, you can initiate a hardware reset to factory default settings by pressing a Reset button. On others, you must initiate the reset from the s...

How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP E2610-PWR switch?

You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice that the Fault and Fan Status LEDs are flashing. What is the most likely cause of t...

Using the hardware, how do you reset an HP 1700 Series switch to its factory default settings?

You have been dispatched by the response center to help a customer who is having trouble with an HP E5412 zl switch. The switch is located in a remote closet that is far from the d...

Which function does an Asynchronous Digital Subscriber Line (ADSL) splitter fulfill?