CTS Exam Questions

Which of the following meters measures the light coming directly from a source?

Which viewing category describes the usage of a display as reference for CAD drawings?

There are a number of ways to attach a projector mount to a concrete ceiling. What is tire PRIMARY factor that must be considered when deciding which, if any, method is appropriate...

A teacher asks about obtaining portable, powered speakers they can use for rehearsals in a variety of locations around their school. What information MUST be obtained to recommend...

The owner is looking for an audio solution for staff meetings. Which question is MOST important to ask to ensure a functioning system?

On sites such as hospitals or prisons, which of the following will have the MOST impact on labor costs for the project?

Which of the following terms means a complete lighting instrument composed of a lamp and housing?

The color of a light wave is determined by the

Remotely monitoring system health of a deployed conference room and rebooting it when faulty is an example of

The integrator gets an urgent service call from the client's AV engineer that there is no power indication on the HDMI switcher in the rack. What is the BEST workaround that the in...

In a request for proposal (RFP) document, what would be the BEST place to find the overall expectations and contractual requirements for the project?

According to AVIXA Standards, what is the MINIMUM load rating for truss that will hold a 5000 lbs (2268 kg) LED wall?

"Shock Loads" for equipment mounts refer to

When is the optimal time to conduct training of end users in a new AV installation?

An integrator has to upgrade a camera system in an existing board room. What is the MOST IMPORTANT information to gather on the site visit?

What key specification of an owner furnished credenza will a technician need to know that may impact the warranty of the AV equipment?

What should an AV integrator provide to a general contractor to ensure the supporting trades get the AV information that is needed?

When considering the security of AV equipment residing on the client network, what is the MOST important step to take to keep the equipment safe from hackers before connecting the...

When connecting two switches with multiple VLANs, which function should be setup in order to pass all the packets from one switch to the other?

In an audiovisual system where a touch panel is to be connected to the control system via the LAN, the designer may choose to use a

What is the MAIN benefit of carrying out regular software updates provided by the device manufacturer?

Which of the following protocol allows sources and displays to communicate in order to ensure the display is sent the correct signal?

Which of the following is the MOST SUITABLE security method for a small portable projector?

A loudspeaker with sensitivity 90 dB SPL measured at 1 meter, 1 watt Is placed 2 meters away from a listener. At 1 watt, what Is the SPL at the listener?

Which one of these features has to be disabled for a network switch in a Dante network?

The AV Project Manager is responsible for

When designing a projection system for an auditorium, what are the PRIMARY design considerations?

When designing an AVB system, ensuring that these are AVB compliant is critical.

What is a MAIN benefit of an externally managed AV/IT service?

A client setting terms for "tire protection of existing conditions" would most likely apply to which of tire following project types?

What is the difference between the audio system's operational level and the maximum level the system can attain?

While conducting a site survey, it is discovered that a conference room has glass walls, high ceilings, and wooden floors. The BIGGEST challenge for this room would be handling of...

Milestones are key events or deliverables in a project. On a Gantt Chart or Network Diagram, milestones are represented by a(n)

What frequency is identified by the numbers above each slider of a graphic equalizer?

Based on this image, what is the aspect ratio for WUXGA?

What is the standard impedance of a DMX cable?

In which of the following scenarios would infrared (IR) wireless microphones be preferred?

Ambient noise PRIMARILY affects desired sound by

While troubleshooting a DSP, the AV technician notices that the DHCP server has failed due to the control system not being able to control the volume of the DSP. In order to restor...

In sound, amplitude is perceived as

Up to which data rate can USB 2.0 support?

A 2x2 video wall was sold with each display being Full HD resolution. Now the client wants to show live content at the best possible quality over the complete wall. Which resolutio...

When specifying a paging system for a large building, what kind of speaker system should be recommended?

Which of the following terms is defined as a lamp that produces light by heating a filament in a sealed glass housing?

The installation of a complex AV project is planned to be completed within 6 months. What is the MOST cost-effective plan for ordering the equipment for the project?

Which microphone type has a basic cardioid pick up pattern?

Which of the following aspects should FIRST be considered at an initial site survey for the location of AV racks?

Every item in a room has some acoustic absorption or reflection characteristics. The level of sound absorbed is MOST affected by

The limits of the vertical visual field indicate that displays should be positioned where in relation to the viewers' standard line of sight?

Which of the following is an EQ type?