350-601 Exam Questions

An engineer requires the Cisco Fabric Services to distribute NTP configuration only to the members within the scope of a VSAN that belongs to a Cisco Unified Network. Which scope d...

A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications insi...

A network engineer must download a firmware image from a remote location to a Cisco UCS Fabric Interconnect. The software bundle is over 232 MB in size. The file transfer must use...

Refer to the exhibit. An administrator connects a Cisco Nexus Series Switch to the Cisco ACI fabric. The connectivity must allow Cisco Discovery Protocol, LLDP, and LACP. Which act...

An engineer must perform an initial configuration of VXLAN and MP-BGP EVPN on the Cisco Nexus 9000 Series platform. The underlay must be OSPF, and the VTEP must run with distribute...

What is a feature of EPLD upgrades on a Cisco Nexus 7000 Series Switch?

Which Cisco HyperFlex ability adds compute or storage-only nodes as required?

An engineer is implementing VSAN 10 on multiple Cisco Nexus 5600 Series Switches and must ensure that the full zone set and active zone set are identical across the fabric. Which c...

Which value is missing in the field in the key called "msg" in this JSON response? Request: Response:

A DevOps engineer must use Python to manage a Cisco device. The device is in a highly secure DMZ environment. Only trusted Cisco Python libraries can be used. Which solution meets...

What is the format of this output?

A network engineer needs a solution that simplifies the initial deployment of Cisco Nexus Series Switches. The solution must support these requirements: - zero-touch provisioning -...

What does this configuration create?

A network engineer implements a Python script on a Cisco Nexus 9000 Series Switch with redundant supervisors. The script is located on a built-in container that runs as part of the...

Refer to the exhibit. A network engineer must monitor the traffic from the server on VLAN 80. All source traffic from the server must be captured on the monitoring device. Which co...

The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The adminis...

ASAN administrator must implement infrastructure monitoring for the Fibre Channel storage environment. The storage environment consists of a standalone Cisco Nexus 9000 Series Swit...

Refer to the exhibit. Which feature must be implemented on Postman to receive the response from a Cisco Nexus 9000 Series Switch?

Refer to the exhibit. An engineer must activate the port-security database on a Cisco MDS 9000 Series Switch for VSAN 100, but receives the error shown. Which command completes the...

An engineer builds a new Cisco ACI fabric. Which VLAN must be configured as the infrastructure VLAN during the Cisco APIC setup script?

Refer to the exhibit. An engineer must configure port security on the Cisco Nexus 5000 Series Switch that meets these requirements: - Port security must be applied on VSAN 10 only....

A SAN administrator receives reports about latency and response-time issues that impact various applications. The incidents have gradually increased in frequency and severity and h...

Refer to the exhibit. An engineer must upgrade the N9K_2 device to the latest code. In preparation for the upgrade, the engineer wants to divert all data plane traffic between RTR_...

Refer to the exhibit. A traffic collector virtual machine is installed inside the Cisco UCS server. The collector must monitor traffic that is received on G1/2 with ERSPAN. Which s...

Which device alias database is shown by this output? switch# show device-alias database device-alias name SampleName pwwn 24:40:00:e7:09:0b:27:56

Which storage solution operates at the file level and contains its own native lightweight operating system on simplified hardware?

Which component becomes unavailable for a maximum of 80 seconds during a nondisruptive Cisco NX-OS upgrade?

Refer to the exhibit. These Cisco ACI objects already have been created: - Bridge domain: Test_Telco - Application profile: PROD_App - Tenant: PROD Which value for application_prof...

Which feature of Cisco Nexus Dashboard permits users to switch between site controllers of Cisco ACI?

Which FC mode is the device MDS-9148S-2 operating in?

What is the impact of a nondisruptive upgrade on fabric and modular switches?

Refer to the exhibit. What happens to the VRRP configuration when the router SW9621-2 becomes operational?

An engineer must integrate Cisco ACI with a VMware vSphere environment. The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EP...

An engineer implements an Application Performance Monitoring (APM) solution. The solution runs in a vSphere infrastructure where the vSwitch support for promiscuous mode is disable...

What is a feature of an electronic programmable logic device upgrade on a Cisco MDS 9000 Series Switch?

An engineer must configure a new Cisco UCS B-Series infrastructure with a Cisco 5108 chassis. The configuration must meet these requirements: - The setup must use aggregation betwe...

An engineer must replace a defective fabric interconnect with the same model. The system must be restored, including the database of locally created users. The equivalent Cisco UCS...

Which Cisco UCS firmware reboot policy must be used in the maintenance policy to prevent the server firmware from upgrading automatically and wait for user input before proceeding?

An engineer configures user authentication on Cisco UCS Manager to ensure that the user and roles can be saved on the external server and secured using authentication. Which set of...

An engineer must upgrade the server firmware for which the service profile is configured with a host firmware package. Which action must be taken to accomplish this goal?

A Cisco IMC on the Cisco UCS C-Series Server must be configured with VLAN ID 110 and a priority value of 20. Which command set meets these requirements?

Refer to the exhibit. An engineer must access a Cisco UCS C-Series server KVM from a remote location. The engineer must use the out-of-band interface to access the KYM. Which confi...

An engineer must deploy a Cisco UCS C-Series Server with a single VIC 1455 integrated into a Cisco UCS Manager cluster. Two fiber connections are available, and the deployment has...

An engineer must configure device aliases for a Cisco MDS 9000 Series Switches-based SAN fabric. The configuration must meet these requirements: - The engineer must be prompted bef...

Refer to the exhibit. An engineer configures an FCoE connection between a Cisco UCS and a Cisco Nexus 9000 Series Switch. The UCS FI-A connects to the Nexus switch using interface...

An engineer must deploy Cisco ACI in two data centers with a multisite configuration. The deployment must support a central management console for multiple data centers host multip...

An engineer must configure a Cisco MDS 9000 Series Switch to store generated log messages to a file. The file must store logs of the severity of "warning" and above, and the file s...

Refer to the exhibit. An engineer must create a Bash script to run in the Cisco NX-OS Guest Shell. The script must loop through the available namespaces and output all registered i...

Refer to the exhibit. A network engineer is using tcpdump to capture a snapshot of OSPF-retated traffic on a specific Cisco NX-OS switch port. For security reasons, the capture mus...

An engineer must automate the provisioning of Cisco ACI objects using the Terraform tool. The engineer must ensure that APIC counts the authentication login requests against the th...