350-601 · Question #475
An engineer must perform an initial configuration of VXLAN and MP-BGP EVPN on the Cisco Nexus 9000 Series platform. The underlay must be OSPF, and the VTEP must run with distributed default gateway…
The correct answer is A. NX9K(config)# feature nv overlay. The initial and foundational command to enable VXLAN and MP-BGP EVPN capabilities on a Cisco Nexus 9000 Series platform, which is required for the specified network setup, is 'feature nv overlay'.
Question
An engineer must perform an initial configuration of VXLAN and MP-BGP EVPN on the Cisco Nexus 9000 Series platform. The underlay must be OSPF, and the VTEP must run with distributed default gateway on a VLAN interface. Which command set must be applied to meet these requirements?
Options
- ANX9K(config)# feature nv overlay
- BNX9K(config)# feature nv overlay
- CNX9K(config)# feature nv overlay
- DNX9K(config)# feature nv overlay
How the community answered
(29 responses)- A83% (24)
- B3% (1)
- C3% (1)
- D10% (3)
Why each option
The initial and foundational command to enable VXLAN and MP-BGP EVPN capabilities on a Cisco Nexus 9000 Series platform, which is required for the specified network setup, is 'feature nv overlay'.
The command 'feature nv overlay' is essential as it enables the Network Virtualization Overlay (NVO) functionality on Cisco Nexus 9000 series switches. This feature activation is a prerequisite for configuring VXLAN, MP-BGP EVPN, VTEPs, and the distributed default gateway, fulfilling the initial setup requirements.
The choices provided are identical, all showing 'feature nv overlay'. If there were distinct command sets, other choices would represent incomplete or incorrect configurations for the specified requirements.
Concept tested: Cisco Nexus VXLAN EVPN enablement
Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/vxlan/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x.html
Topics
Community Discussion
No community discussion yet for this question.