201 Exam Questions
337 real 201 exam questions with expert-verified answers and explanations. Page 5 of 7.
- Question #217Section 1: Perform Initial Setup
A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license. Which steps should the BIG-IP Administrator?
BIG-IP licensingadd-on licenselicense re-activationuser count increase - Question #218Section 2: Configure Load Balancing Features
An LTM device has a virtual server mapped to www5f.com with a pool assigned. The objects are defined as follows: Virtual server: Destination 192.168.245.100.443 netmask 255.255.255...
source address persistencepersistence profilenetmaskload balancing - Question #219Section 5: Troubleshoot a BIG-IP System
A BIG-IP device is configured with both an internal external and two Corporate VLANs. The virtual server has SNAT enabled and is set to listen on all VLANs Auto Last Hop is disable...
routingstatic routesVLANsSNATtroubleshooting connectivity - Question #220Section 7: Configure Advanced Features
A BIG-IP Administrator needs to modify a virtual server that web offload web traffic compression tasks from the target server. Which two profiles must the BIG-IP Administrator appl...
traffic compressionHTTP profilecompression profilevirtual server profiles - Question #221Section 2: Configure Load Balancing Features
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members. What is allowing users to continue to reach the disabled poo! members?
persistence profilepool membersvirtual serverconnection management - Question #222Section 3: Administer a BIG-IP Device
A 8IG-IP Administrator is making adjustments to an iRule and needs to identify which of the 235 virtual server configured on the BIG-IP device will be affected. How should the admi...
iRulesvirtual serversconfiguration utilitynetwork map - Question #223Section 3: Administer a BIG-IP Device
Refer to the exhibit. According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?
authenticationTACACS+user directoryremote authentication - Question #224Section 2: Configure Load Balancing Features
A web server administrator informs the BIG-IP Administrator that web servers are overloaded Starting next month, the BIG-IP device will terminate SSL to reduce web server load. The...
SSL offloadingclient SSL profileserver SSL profileHTTP communication - Question #225Section 1: Perform Initial Setup
A BIG-IP Administrator wants to add a new Self IP to the BIG-IP device. Which item should be assigned to the new Self IP being configured?
Self-IPVLANnetwork configuration - Question #226Section 6: Configure High Availability
A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to en...
device grouptraffic groupfailoverforce to standbyhigh availability - Question #227Section 5: Troubleshoot a BIG-IP System
A BIG-IP Administrator has configured a BIG-IP cluster with remote user authentication against dcOl f5trn.com. Only local users can successfully log into the system. Configsync is...
remote authenticationconfigsyncNTPtime synchronizationtroubleshooting - Question #228Section 4: Maintain a BIG-IP Device
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. Th...
UCS archiveRMAlicensingtmshrestore configuration - Question #229Section 4: Maintain a BIG-IP Device
A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility. Which TMSH command should the BIG-IP Administrator use to accomplish...
UCS archivetmshencrypted archiverestore configuration - Question #230Section 3: Administer a BIG-IP Device
On the VCMP system, a BIG-IP host administrator imports a new ISO image into the host's /shared/images folder. The new ISO images that reside on the vCMP host are available for ins...
vCMPhostguestISO imagesoftware installation - Question #231Section 5: Troubleshoot a BIG-IP System
A BIG-IP Administrator configures a Virtual Server. Users report that they always receive a TCP RST packet to the BIG-IP system when attempting to connect to it. What is the possib...
virtual serverTCP RSTconnection rejectionvirtual server type - Question #232Section 2: Configure Load Balancing Features
A BIG-IP Administrator needs to remove a pool specific health monitor. There is a pool named Best Pool with two members, one named Best pool member and one named Best pool member2....
poolhealth monitorconfiguration utilityGUI navigation - Question #233Section 2: Configure Load Balancing Features
A BIG-IP Administrator need to ensure that a pool member and down by the monitor the BIG-IP system sends existing connections to another be pool member. Which should the BIG-IP Adm...
pool memberhealth monitoraction on service downreselectconnection management - Question #234Section 6: Configure High Availability
When network failover is enabled, which of the following is true?
network failoverfailover cablehigh availabilityHA synchronization - Question #235Section 1: Perform Initial Setup
Refer to the exhibit. The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator c...
VLANSelf-IPphysical interfacenetwork connectivitytroubleshooting - Question #236Section 2: Configure Load Balancing Features
Refer to the exhibit. How are new connections load balanced?
load balancing methodleast connectionspool membersconnection distribution - Question #237Section 5: Troubleshoot a BIG-IP System
Active connections to pool members are unevenly distributed. The load balancing method is Least Connections (member) Priority Group Activation is disabled. What is a potential caus...
persistence profileload balancing methodleast connectionsuneven distributiontroubleshooting - Question #238Section 3: Administer a BIG-IP Device
A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed...
remote loggingsyslogTCP loggingsystem configuration - Question #239Section 1: Perform Initial Setup
A BIG-IP Administrator runs the initial configuration wizard and learns that the NTP servers were invalid. In which area of the Configuration Utility should the BIG-IP Administrato...
NTP servertime synchronizationconfiguration utilityGUI navigation - Question #240Section 5: Troubleshoot a BIG-IP System
Which file should the BIG-IP Administrator check to determine when a Virtual Server changed its status?
virtual server statusloggingLTM logs/var/log/ltm - Question #241Section 2: Configure Load Balancing Features
Refer to the exhibit. During maintenance, the BIG-IP Administrator manually disables a pool member as shown. What is the result?
Pool membersConnection statesPersistence - Question #242Section 5: Troubleshoot a BIG-IP System
During a maintenance window, an EUD test was executed and the output displayed on the screen. The BIG-IP Administrator did NOT save the screen output. The BIG-IP device is currentl...
EUD logsTroubleshootingLog filesF5 Support - Question #243Section 6: Configure High Availability
An application is configured so that the same pool member must be used for an entire session, as well as for HTTP and FTP traffic. A user reports that a session has terminated, and...
Persistence mirroringMatch Across ServicesFailoverHA - Question #244Section 3: Administer a BIG-IP Device
A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find...
LicensingModulesConfiguration Utility - Question #245Section 2: Configure Load Balancing Features
Refer to the exhibit. The BIG-IP Administrator needs to avoid overloading any of the Pool Members with connections, when they become active. What should the BIG-IP Administrator co...
Slow ramp timePool membersConnection managementOverload prevention - Question #246Section 2: Configure Load Balancing Features
A 8IG-IP Administrator configures a Virtual Server to load balance traffic between 50 webservers for an ecommerce website Traffic is being load balanced using the Least Connections...
PersistenceLoad balancingVirtual serversSession management - Question #247Section 5: Troubleshoot a BIG-IP System
A BIG-IP Administrator sees the following error message in /var/log/ltm diskmonitor: *******; Disk partition shared has less than 30$ free. Which section of the Configuration Utili...
Disk spaceTroubleshootingLog messagesConfiguration Utility - Question #248Section 5: Troubleshoot a BIG-IP System
A new BIG-IP VE is deployed with default settings. The BIG-IP Administrator completes the setup utility in the Configuration Utility. The internal self IP address fails to respond...
Self-IPPort lockdownNetwork connectivityTroubleshooting - Question #249Section 5: Troubleshoot a BIG-IP System
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10 1.33 and port 443. What is the reason for this problem?
Self-IPPort lockdownManagement accessHTTPSTroubleshooting - Question #250Section 5: Troubleshoot a BIG-IP System
A BIG-IP Administrator is checking the BIG-IP device for known vulnerabilities. What should the 8IG- IP Administrator upload to BIG-IP iHealth for further analysis?
iHealthQKViewSystem analysisF5 Support - Question #251Section 6: Configure High Availability
A BIG-IP Administrator is performing maintenance on the active BIG-IP device of an HA pair. The BIG- IP Administrator needs to minimize traffic disruptions. What should the BIG-IP...
HAFailoverMaintenanceActive/Standby - Question #252Section 2: Configure Load Balancing Features
Refer to the exhibit. How long will the persistence record remain in the table?
PersistencePersistence tableTimeoutConfiguration - Question #253Section 2: Configure Load Balancing Features
A BIG-IP system has the following configuration: * SNAT is set to Auto Map * There are two VLANs internal and external * Default route is pointed to the gateway on external VLAN *...
SNATAuto MapFloating IPHAEgress VLAN - Question #254Section 2: Configure Load Balancing Features
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider m...
Load balancing methodsDynamic RatioPool membersServer capacity - Question #255Section 3: Administer a BIG-IP Device
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM...
Module provisioningtmshLTMASMResource allocation - Question #256Section 2: Configure Load Balancing Features
A VLAN has the following objects configured: Self-IP 10.10.10.100 with port lockdown set to Allow default Virtual server 10.10.10.100:443 with UDP profile enabled Virtual server 10...
Self-IPVirtual serverPacket flowPort lockdownPrecedence - Question #257Section 3: Administer a BIG-IP Device
A BIG-IP Administrator opens a case with F5 Support. The support engineer requests the BIG-IP appliance chassis serial number. Which TMSH command will provide this information?
tmshSystem informationSerial numberHardware information - Question #258Section 2: Configure Load Balancing Features
A BIG-IP Administrator needs to configure the BIG-IP system to perform load balancing for FTP servers running passive mode FTP. How should the administrator configure the Virtual S...
FTPPassive FTPVirtual serverProfilesLoad balancing - Question #259Section 5: Troubleshoot a BIG-IP System
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using https://mybigip mycompany net. The management portal has been working all week. When the...
TroubleshootingManagement accessDNSTCP connectivityNetwork issues - Question #260Section 4: Maintain a BIG-IP Device
What should the BIG-IP Administrator do to apply and activate a hotfix to a BIG-IP device that is currently running version 11.0.0 on active partition HD1.1?
HotfixBoot partitionsSoftware upgradeActivationMaintenance - Question #261Administer a BIG-IP Device
An IT support engineer needs to access and modify Virtual Servers in three partitions (Common /Banking and Dev) daily on a BIG-IP device. The company operates a Least Privilege acc...
user rolesleast privilegepartition accessvirtual server access - Question #262Configure Load Balancing Features
when browsing, they are periodically required to re-login to /resources/201.1.7.b.2_l.com. The objects are defined as follows: Virtual server. Destination 192.168.245.100:443 netma...
persistence profilesSSL session persistencesource IP persistencere-login issue - Question #263Maintain a BIG-IP Device
The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS. Where can the administrator obtain F5 documentation on upgrade requirements?
BIG-IP upgradeTMOS upgradeF5 documentation - Question #264Maintain a BIG-IP Device
A BIG-IP Administrator needs to make sure that the automatic update check feature works properly. What must the administrator configure on the BIG-IP system?
automatic updateupdate check scheduleBIG-IP system settings - Question #265Maintain a BIG-IP Device
A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix. What should the BIG-IP Administrator d...
boot locationshotfix managementdowngrade procedureBIG-IP software - Question #266Troubleshoot a BIG-IP System
The BIG-IP Administrator creates a custom iRule that fails to work as expected. Which F5 online resource should the administrator use to help resolve this issue?
iRulestroubleshooting resourcesDevCentralF5 community