NS0-506 Exam Questions

You are verifying multipathing from the host to the storage controller. Which three components should you verify? (Choose three.)

Click the Exhibit button. Referring to the exhibit, which entry is appropriate to add to a zone on the FC switch?

A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. They have enabled jumbo frames on...

Exhibit cl01-01::>vol show -vserver svm1 volume v_iscsi_exch01 Vserver Name: svm1 Volume Name: v_iscsi_exch01 Aggregate Name: a1_cl01_sas Volume Size: 5 GB Volume State: online Vol...

You have a new FAS8080EX 2-node cluster. The FC switch ports connected to the onboard UTA2 ports will not come online. Which two node-based issues would case the problem? (Choose t...

A company has 50 ESXi hosts connected using FC to a single target port on a NetApp cluster. Ten hosts are configured with an HBA queue depth on 128. Forty hosts are configured with...

You are planning to move to a newer clustered Data ONTAP version. Which two resources should you review prior to the move? (Choose two.)

Which two flags would you use to enable NetApp thin provisioning on a LUN? (Choose two.)

A customer has a host experiencing performance problems with its FC LUNs. The customer has examined the nodes hosting the LUNs, and both the disk and CPU performance are below 50%...

A customer is configuring their host for FC connectivity to a clustered Data ONTAP storage solution. They have installed a 4 GB FC HBA into the host and connected it with optical c...

What is installed on your Linux host when you install the Linux Unified Host Utilities 7.0?

You configure space-reserved LUNs on thick-provisioned volumes, and you want to guarantee overwrites. How would you accomplish this task?

Which objects reside inside an igroup?

You are troubleshooting a node that had a core dump. The HA partner took over and you successfully performed a giveback. You need to get access to the core files. Which two locatio...

On a Windows 2012 Server, the FC load balance policy is configured using which two utilities? (Choose two.)

You currently have the following configuration on your cluster: cl01::>igroup show -instance Vserver Name: svm1 Igroup Name: ig2 Protocol: mixed OS Type: linux Portset Binding Igro...

A customer has a 4-node cluster and wants to use iSCSI for LUN traffic. Which license needs to be installed on the nodes?

Click the Exhibit button. cl01::>lun mapping show - vserver svm1 - path /vol/svm1_vol1/lun1 - igroup svm1-ig1 Vserver Name: svm1 LUN path: /vol/svm1_vol1/lun1 Volume Name: svm1_vol...

Click the Exhibit button. cl01::>iscsi portal show Logical Status CurrCurr Vserver Interface TPGT Admin/Oper IP Address Node Port Enabled ---------- ---------- ---- -- -------- ---...

You want to verify that a host will be able to see the storage. A LUN is mapped to an igroup for the host, and both the host and storage are connected to FC switches. Which command...

Click the Exhibit button. cl01::> net int show -vserver svm1 (network interface show) Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port...

In a 4-node cluster, how many LIFs are required on each node to allow a host to use ALUA and have multiple optimized paths to each LUN?

Click the Exhibit button. cl01::>lun resize -vserver svm1 -volume db1_vol -lun db1 -size 4096g Error: command failed: New size exceeds this LUN's initial geometry cl01::> What is t...

You are asked to configure the Service Processor on a newly installed node, and must verify the following command: system-service processor network modify -node local -address-fami...

Inside of an SVM, an iSCSI IP address is defined on which object?

Which protocol allows to access a controller's CLI interface?

Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?

You are zoning a fabric for a clustered Data ONTAP storage system. After cabling, you see the following addresses logged into the fabric: 20:04:00:a0:98:16:db:9c 50:0a:09:83:8d:b1:...

A customer is experiencing slower than expected performance on a database connected to an iSCSI LUN. They are surprised that performance has decreased even though they have upgrade...

Click the Exhibit button. A customer has deployed a new FAS8080EX running clustered Data ONTAP 8.3. Host A is running multipath software that has been properly configured. Also, Ho...

What does Selective LUN Mapping (SLM) do?

Click the Exhibit button. cl01::>fcpportname show Vserver -------- -------------- ---- --------------------- svm1 n1_6a 20:06:00:a0:98:1c:c3:1a svm1 n1_6b 20:07:00:a0:98:1c:c3:1a s...

A volume with a single LUN shows 30% deduplication savings. However, the output of df on the cluster does not show the 30% savings back to the volume or aggregate. What is causing...

What is the default RAID level for new aggregates on a DS4486?

On a FAS8040, which port is used for FCoE connections?

Click the Exhibit button. Referring to the diagram shown in the exhibit, what will happen if PDU-B fails?

Hosts and switches are connected to a FAS8040. Multiple FC-enabled SVMs have been created, and LUNs have been mapped to multiple hosts. During failover testing, one of the hosts lo...

Click the Exhibit button. Based on the exhibit, you are configuring a 4-node cluster with an iSCSI LIF ob each node. You connect using the first LIF from a Windows Server 2012 host...

You have a 4-node FAS8040 cluster licensed for FCP and iSCSI. Each node has both FC and iSCSI LIFs. One of your Windows 2012 Servers has a single 8Gb FC port and a single 10 Gb Eth...

A customer has a clustered Data ONTAP solution and needs to connect several Windows 2012 servers using iSCSI for LUN access. Before the LUN can be seen, what must be configured on...

You have executed the following FC configuration workflow: 1. Verify IMT supported configuration. 2. Install VSC for VMware vSphere on a Windows Server. 3. Add the storage cluster...

Click the Exhibit button. You have a 2-node data ONTAP 8.3 cluster. Based on the exhibit, which change must be made to make svm1 conform to iSCSI best practices? cl01::> net int sh...

Which three environmental or physical requirements need to be met when designing a SAN solution? (Choose three.)

You have a large, heterogeneous SAN environment. You are asked to gather information for all hosts, HBAs, switches, and storage. You are also told that you must collect this inform...

Which information-gathering command should you use to gather logs for troubleshooting switch information for your Brocade switches?

Click the Exhibit button. After mapping the LUN on the cluster, you are not able to see in on the Windows 2012 host. cl01::>igroup show -instance Vserver Name: svm1 Igroup Name: ig...

You want to prevent an FCoE frame from being split into two Ethernet frames. What is the minimum required frame size that will satisfy this requirement?

Click the Exhibit button. A storage administrator has the configuration shown in the exhibit. In which scenario would a volume move be successful? cl01::>vserver show -vserver svm1...

Click the Exhibit button. cl01::>igroup show -vserver svm1 VserverIgroup Protocol OS Type Initiators --------- ------------- ------ -- --------- ----------------- -----------------...

An administrator wants to provide isolation among physical devices connected to the same FCP fabric. Which Cisco switch feature accomplishes this task?