Click the Exhibit button. [edit] user@PE-1# show protocols rsvp { interface all; } mpls { label-switched-path p1 { from 1.1.1.1; to 4.4.4.4; no-cspf; } interface all; } bgp { group Int { type internal; local-address 1.1.1.1; family inet { unicast; } family inet-vpn { unicast; } neighbor 2.2.2.2; neighbor 3.3.3.3; neighbor 4.4.4.4; } } ospf { area 0.0.0.0 { interface ge-0/0/2.0; interface lo0.0; } } [edit] user@PE-1# show routing-instances CE-1 instance-type vrf; interface ge-0/0/1.0; route-destinguisher 65305:395; vrf-target target:65412:100; routing-options { static { route 100.100.100.0/24 next-hop 192.168.1.100; } } [edit] user@P-1# show protocols rsvp { interface all; } mpls { interface all; } ospf { area 0.0.0.0 { interface ge-0/0/1.0; interface ge-0/0/2.0; interface lo0,0; } } [edit] user@P-2# show protocols rsvp { interface all; } mpls { interface all; } ospf { area 0.0.0.0 { interface ge-0/0/1.0; interface ge-0/0/2.0; interface lo0,0; } } [edit] user@PE-2# show protocols rsvp { interface all; } mpls { label-switched-path p2 { from 4.4.4.4; to 1.1.1.1; no-cspf; } interface all; } bgp { group Int { type internal; local address 4.4.4.4; family inet { unicast; } family inet-vpn { unicast; } neighbor 2.2.2.2; neighbor 3.3.3.3; neighbor 1.1.1.1; } } ospf { area 0.0.0.0 { interface ge-0/0/2.0; interface lo0.0; } } [edit] user@PE2# show routing-instances CE-2 instance-type vrf; interfcae ge-0/0/1.0; route-distinguisher 65305:395; vrf-target target:64512 :100; routing-options { static { route 200.200.200.0/24 next-hop 10.1.1.100; } } Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP routes are not showing up on the PE routers. The topology in this scenario is shown below. Site-1 PE-1 P-1 P-2 PE-2 Site-2 Which action should you take to allow communication between Site-1 and Site-2?

Question

Click the Exhibit button. [edit] user@PE-1# show protocols rsvp { interface all; } mpls { label-switched-path p1 { from 1.1.1.1; to 4.4.4.4; no-cspf; } interface all; } bgp { group Int { type internal; local-address 1.1.1.1; family inet { unicast; } family inet-vpn { unicast; } neighbor 2.2.2.2; neighbor 3.3.3.3; neighbor 4.4.4.4; } } ospf { area 0.0.0.0 { interface ge-0/0/2.0; interface lo0.0; } } [edit] user@PE-1# show routing-instances CE-1 instance-type vrf; interface ge-0/0/1.0; route-destinguisher 65305:395; vrf-target target:65412:100; routing-options { static { route 100.100.100.0/24 next-hop 192.168.1.100; } } [edit] user@P-1# show protocols rsvp { interface all; } mpls { interface all; } ospf { area 0.0.0.0 { interface ge-0/0/1.0; interface ge-0/0/2.0; interface lo0,0; } } [edit] user@P-2# show protocols rsvp { interface all; } mpls { interface all; } ospf { area 0.0.0.0 { interface ge-0/0/1.0; interface ge-0/0/2.0; interface lo0,0; } } [edit] user@PE-2# show protocols rsvp { interface all; } mpls { label-switched-path p2 { from 4.4.4.4; to 1.1.1.1; no-cspf; } interface all; } bgp { group Int { type internal; local address 4.4.4.4; family inet { unicast; } family inet-vpn { unicast; } neighbor 2.2.2.2; neighbor 3.3.3.3; neighbor 1.1.1.1; } } ospf { area 0.0.0.0 { interface ge-0/0/2.0; interface lo0.0; } } [edit] user@PE2# show routing-instances CE-2 instance-type vrf; interfcae ge-0/0/1.0; route-distinguisher 65305:395; vrf-target target:64512 :100; routing-options { static { route 200.200.200.0/24 next-hop 10.1.1.100; } } Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP routes are not showing up on the PE routers. The topology in this scenario is shown below. Site-1 > PE-1 > P-1 > P-2 > PE-2 > Site-2 Which action should you take to allow communication between Site-1 and Site-2?

Accepted Answer

C. Change the route target to match on PE-1 and PE-2.

Answer

A. Enable LDP for all interfaces on all routes.

Answer

B. Change the route distinguisher to be different on PE-1 and PE-2.

Answer

D. Configure BGP on P-1 and P-2.

Click the Exhibit button. [edit] user@PE-1# show protocols rsvp { interface all; } mpls { label-switched-path p1 { from 1.1.1.1; to 4.4.4.4; no-cspf; } interface all; } bgp { group Int { type…

Question

Options

How the community answered

Explanation

Topics

Community Discussion