HPE7-A08 Exam Questions

After a recent firmware update, several Aruba switches in the network stopped responding. The administrator suspects a configuration corruption issue. What should be the first trou...

Which switching technologies improve network resiliency? (Select two.)

Which actions should be taken before deploying a configuration change to Aruba switches? (Select two.)

What is the primary benefit of using VSF (Virtual Switching Framework) in an HPE Aruba network?

A user reports slow access to a cloud application. The switch shows normal CPU utilization. What should be checked next?

OSPF peering is configure between HPE Aruba Networking CX 6300 switches utilizing bfd. You've made this configuration on switch B, while switch A is in the default configuration: W...

You have applied the following OSPF configuration but are seeing the output from the command below. What is the reason for this?

You need to quickly verify whether a server is responding to a connection request from a client device. What is the best way to capture these packets on a CX switch?

When configuring a multicast solution on HPE Aruba Networking CX switches, what needs to be configured on the access switch to enable efficient traffic flow?

You are deploying a pair of VSX switches parallel to some existing HPE Comware switches. You would like to configure a common first-hop redundancy protocol as part of your migratio...

What does it mean when an event such as the one below occurs on the HPE Aruba Networking CX switch? 2024-04-04T08:35:38.312254+00:00 ICX-Core-1 hpe-vaxd[2167]: Event[701|LOG_INFO|A...

A Linux SFTP server is configured for IP address 192.168.1.100, and the CX8325 switch has a managed IP address 192.168.1.200. How can you backup the saved switch configuration to a...

An administrator wants to ensure that only authorized devices can connect to specific switch ports. Which security feature should be configured?

Which steps should be followed to configure Layer 2 VLANs on Aruba switches? (Select two.)

Your customer's CX switches are managed in HPE Aruba Networking Central. If a VSX primary switch is accidentally powered off, which alert will be triggered?

Which data format do CX switches support for the REST API?

You recently made a configuration change on a switch, and shortly afterward, you noticed a spike in CPU utilization in the NAE dashboard. You are concerned that the high CPU could...

You are implementing HPE Aruba Networking CX switches in a hotel environment. Which feature would allow you to use a single subnet for the wired guests to utilize only default gate...

You have added a switch with existing configuration to an existing group in HPE Aruba Networking Central but the configuration is not synchronizing. What could cause this?

Refer to the exhibit: A senior network architect has created the configuration above. You are implementing the setup in Building A and C. The actual fiber distance between the buil...

You are remotely connected to an HPE Aruba Networking CX 6200M switch using SSH to change the Control Plane ACL, allowing only defined subnets to access the switch with the assista...

Refer to the exhibit: SW-A is the layer-3 gateway for: Server-A in VLAN 100, subnet 10.100.100.0/24 Client-A in VLAN 20, subnet 10.100.20.0/24 Client-B VLAN 30, subnet 10.100.30.0/...

Which HPE Aruba Networking ClearPass configuration is required to implement DUR?

Which does VOQ implement that is different from most typical campus switches?

An administrator will be deploying HPE Aruba Networking Switch Multi-Edit Software to manage an Aruba solution. What does Switch Multi-Edit Software support?

Your customer's CISO would like to deploy colorless ports across the network. Which will you need to configure to meet this requirement?

An Aruba CX8100 VSX has the following state for LACP: What can be observed based on the output?

You are implementing a directly connected routing plan using OSPF on an HPE Aruba Networking CX 6200 and ISP router. What would be the impact of changing the network type to point-...

You need to configure BGP on an HPE Aruba Networking switch using AS 65010. What is required when establishing peering with neighboring devices using eBGP that are not directly con...

You are helping another engineer troubleshoot a new downloadable user role configuration between your CX switches and ClearPass. Which configuration on the switch should you verify...

Refer to the exhibit from and HPE Aruba Networking CX6000: Two CX 6000 switches are interconnected with LAG 1. Based on the output, which statement is true?

What is true when describing HPE Aruba Networking VSX ISL to a new customer?

Refer to the CLI output below: What statement about the output above is correct?

An ACME company employee complained about a recent poor-quality VoIP call while moving around their office environment. HPE Aruba Networking Central reported a fair UCC score for t...

You are testing the use of the automated port-access role configuration process using RadSec authentication over VXLAN. During your testing, you observed that the RadSec connection...

You configured a mixed-mode SSID with WPA3-Enterprise and EAP-TLS security. When you connect a client, HPE Aruba Networking ClearPass shows the following error: What is needed to r...

In a campus topology using VSX with two aggregation switches and downlinks to access switches, which LAG interface configuration at the aggregation layer is correct based on the pa...

You recently added HPE Aruba Networking ClearPass as an authentication server to a group in HPE Aruba Networking Central. RADIUS authentication with Local User Roles (LUR) works fi...

After onboarding three new AOS-10 gateways using the full-setup method into the same HPE Aruba Networking Central group, a customer cannot log in to one of the gateways using the H...

A customer would like to allow their IT Helpdesk to configure IoT devices to connect to a single SSID using a unique PSK that other devices cannot use. Which solution would you rec...

An existing AOS-10 wireless deployment is expanding its zero-trust wireless network to multiple locations. The requirement is to propagate role information to enforce group-based p...

A network administrator wants to configure an 802.1X supplicant for a wireless network that includes the following: AES encryption EAP-MSCHAPv2-based user and machine authenticatio...

A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile based on best practices. Why do they have an equal split of their 260 A...

Refer to the exhibit. A customer is reporting that connectivity is failing for some wireless client devices. What is your conclusion based on the capture?

Refer to the exhibits. What is the effect when you add the statement neighbor 10.2.0.3 send-community both to the IPv4 address family? (Select two)

A customer is experiencing authentication failures when clients connect to a new EAP-TLS SSID. Based on the logs and packet capture above, what is the cause of the failure?

Refer to the exhibit. A network administrator is validating client connectivity and executes the show command shown in the exhibit. Which authentication method was used by the wire...

A customer is running out of IP addresses in a network segment. What will happen if they add an additional IP subnet to the same VLAN?

You have been tasked to ensure that audit logs on mobility gateways contain accurate timestamps, keeping security in mind. Which configuration change would best secure the time clo...

Refer to the exhibit. To which devices has AP-1 established tunnels?