HPE6-A85 Exam Questions

Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2. All four ports have "no shutdown" and "...

What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

When would you bond multiple 20MHz wide 802.11 channels?

What is indicated by a solid amber radio status LED on an Aruba AP?

What does WPA3-Personal use as the source to generate a different Pairwise Master Key (PMK) each time a station connects to the wireless network?

Which flew in a Layer 3 IPv4 packet header is used to mitigate Layer 3 route loops?

A network technician is troubleshooting one new AP at a branch office that will not receive Its configuration from Aruba Central. The other APs at the branch are working as expecte...

A network technician is using Aruba Central to troubleshoot network issues. Which dashboard can be used to view and acknowledge issues when beginning the troubleshooting process?

You need to configure wireless access for several classes of loT devices, some of which operate only with 802 11b. Each class must have a unique PSK and will require a different se...

Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln- band management using an SVl is being used?

Which Protocol Data Unit (PDU) represents the data link layer PDU?

When using Aruba Central what can identify recommended steps to resolve network health issues and allows you to share detailed information with support personnel?

You need to troubleshoot an Aruba CX 6200 4-node VSF stack switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options avai...

A hospital uses a lot of mobile equipment for the diagnosis and documentation of patient data. What is the ideal access switch for this large hospital with distribution racks of ov...

Which device configuration group types can a user define in Aruba Central during group creation? (Select two.)

What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs, and other PoE devices?

You have been asked to onboard a new Aruba 6300M in a customer deployment. You are working remotely rather than on-site. You have a colleague installing the switch. The colleague h...

When using the OSPF dynamic routing protocol on an Aruba CX switch, what must match on the neighboring devices to exchange routes?

Based on the given topology, what is the requirement on an Aruba switch to enable LLDP messages to be received by Switch 1 port 1/1/24. When Router 1 is enabled with LLDP?

Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1.20.0/24, vrf default via 10.1.12.2. [1/0]"?

Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?

What is the ideal Aruba access switch for a cost-effective connection to 200-380 clients, printers and APs per distribution rack?

Which statement about manual switch provisioning with Aruba Central is correct?

What is an advantage of using Layer 2 MAC authentication?

What is the recommended VSF topology? (Select two.)

You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue. Use the show command output images to determine the reason fo...

You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch. What is the best technology to use for this task?

Which authentication does Aruba's Captive Portal use?

Where are wireless client roaming decisions made?

Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?

When using an Aruba standalone AP you select "Native VLAN" for the Client VLAN Assignment. In which subnet will the client IPs reside?

When performing live firmware upgrades on Aruba APs. Which technology partitions all the APs based on RF neighborhood data minimizing the impact on clients?

You are configuring a network with a stacked pair of 6300M switches used for distribution and layer 3 services. You create a new VLAN for users that will be used on multiple access...

Refer to the exhibit. In the given topology, a pair of Aruba CX 8325 switches are in a VSX stack using the active gateway. What is the nature and behavior of the Virtual IP for the...

What are two advantages of a UXl? (Select two.)

What are the main characteristics of the 6 GHz band?

After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core. You ask your colleague to verify the connection is plugged i...

When measuring signal strength, dBm is commonly used and 0 dBm corresponds to 1 mW power. What does -20 dBm correspond to?

The noise floor measures 000000001 milliwatts, and the receiver's signal strength is -65dBm. What is the Signal to Noise Ratio?

What does the status of "ALFOE" mean when checking LACP with "show lacp interfaces'"?

Which part of the WPA Key Hierarchy is used to encrypt and/or decrypt data?

A network technician has successfully connected to the employee SSID via 802 1X. Which RADIUS message should you look for to ensure a successful connection?

You are in a meeting with a customer where you are asked to explain the network redundancy feature Multiple Spanning Tree (MSTP). What is the correct statement for this feature?

Which Aruba technology will allow for device-specific passphrases to securely add headless devices to the WLAN?

The customer has a requirement to create authorization policies for their users with Windows 10 clients, with a requirement for authorizing both device and user credentials within...

A customer has just implemented user and device certificates via a company-wide Group Based Policy (GPO). Which EAP method requires client certificates when authenticating to the n...

What is a weakness introduced into the WLAN environment when WPA2-Personal is used for security?

What does a slow amber-flashing Stack-LED indicate?

Describe the purpose of the administrative distance

What happens when the signal from an AP weakens by being absorbed as it moves through an object?