HPE6-A85 · Question #37
After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core. You ask your colleague to verify the connection is plugged in and the switch…
The correct answer is C. Ping 10.1.1.1 - ping the core to attempt to verify connectivity show lacp agg - to verify which link. These commands might help troubleshoot this issue as they check various aspects of the connectivity between the edge switch and the core switch, such as Layer 3 reachability, Layer 2 adjacency, LACP configuration and status, VLAN trunking configuration, and interface status.
Question
After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core. You ask your colleague to verify the connection is plugged in and the switch is powered on. They confirm that both are correct. You attempt to ping the core switch and confirm that the ping is failing. Knowing the nature of this deployment, what commands might you use to troubleshoot this issued?
Options
- APing 10.11 1 - ping the core to attempt to verify connectivity Show trunk - to verify if the LAG
- Bdiagnostic diag cable-diag 1/1/51 diag cable-diag 1/1/52 - to view diagnostic information for the
- CPing 10.1.1.1 - ping the core to attempt to verify connectivity show lacp agg - to verify which link
- DShow run - to view the running configuration of the switch Show run | begin 20 "vlan 20" - to
How the community answered
(23 responses)- A22% (5)
- B4% (1)
- C65% (15)
- D9% (2)
Explanation
These commands might help troubleshoot this issue as they check various aspects of the connectivity between the edge switch and the core switch, such as Layer 3 reachability, Layer 2 adjacency, LACP configuration and status, VLAN trunking configuration, and interface status.
Topics
Community Discussion
No community discussion yet for this question.