HPE6-A45 Exam Questions

Refer to the exhibit. radius-server key password radius-server host 10.1.10.10 dyn-authorization radius-server host 10.1.10.11 dyn-authorization AOS-Switches will enforce 802.1X au...

An administrator wants to ensure that an AOS-Switch forwards all traffic that it receives on interface 1 with high priority. Switches should also communicate the high priority to o...

Refer to the exhibit. A network administrator sets up prioritization for an application that runs between Device 1 and Device 2. However, the QoS for the application is not what th...

Refer to the exhibits. The exhibits show the current operational state for routes on Switch-3. The company wants Switch-3 to prefer the link to Switch-1 over the link to Switch-2 f...

An AOS-Switch implements tunneled node. Which benefit does the PAPI enhanced security key provide?

Refer to the exhibit. vlan 20 router tunneledendpoints ip address 10.1.20.10 255.255.255.0 trabo exit A network administrator needs to deploy AOS-Switches that implement port-based...

OSPF Area 1 has two ABRs. One ABR is configured with this range for Area 1: 10.1.0.0/16. The other ABR is not configured with a range for Area 1. Which type of issue occurs due to...

Refer to the exhibits. The company wants to minimize congestion on Link 1. Which spanning tree implementation meets this goal?

Refer to the exhibit. The network administrator enables DHCP snooping globally and on VLAN 2. An additional step is mandatory for DHCP snooping to operate correctly and for DHCP to...

Refer to the exhibit. A network administrator configures connection rate filtering on interface 1 with the throttle action. Device 1 crosses the threshold and triggers the action....

What must an OSPF router do to ensure nonstop routing should a standby member take over as commander when the original VSF commander fails?

Two AOS-Switches are directly interconnected. The network administrator wants to prevent broadcast storms and other Layer 2 issues that could occur if there is physical damage to a...

What should a network administrator do to support a faster failover in a similar situation?

Which benefit is provided by MDS authentication for BGP?

The VoIP phone connects, authenticates successfully, and is dynamically assigned to tagged VLAN 6. The endpoint connected to the phone does not authenticate successfully but is ass...

A company wants to change Area 1 shown in the exhibit from a stub area to a totally stub area. What will be one effect of this planned change?

An ACL which runs IGMP on a VLAN. What is a requirement for the switch to be a potential IGMP querier on that VLAN?

Switch-1 runs BGP. What should the network administrator do to permit Switch-1 to establish a neighbor relationship with Router-1?

A network administrator sees the output in the exhibit and is concerned that the switch will reach the limit for rules. What action should be done to solve this concern?

A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches. Which change to the exhibit is ne...

Network administrators need to track when traffic matches deny entry in an ACL applied to a port. They want the alert to be sent to a syslog server that is already set up to send l...

A network administrator needs to deploy AOS-Switches that use port-based tunneled-nodes. VLAN calls for tunneled-node endpoints to be assigned to VLAN 20. Which plan for the Aruba...

Switch-1 has a power issue that causes it to fail. When Switch-1 comes back up, endpoints lose connectivity for a few minutes. The network administrator decides to use this command...

Exhibit 1 shows a portion of the BGP routing table when the BGP solution was first deployed. Exhibit 2 shows the same portion at the current time. What can explain the current stat...

Which devices can be deployed in a mesh topology for backplane stacking?

An administrator needs to create a QoS policy on an AOS-Switch. Which is one component that the administrator must create before the policy?

Based on the exhibits, what can administrators determine?

An administrator needs to create a backplane stack with four AOS-Switches. The administrator wants to choose which switch becomes the commander. Which procedure meets those needs?

An administrator deploys AOS-Switches at sites with inexperienced IT staff. The main office network administrators want to monitor thresholds to generate alerts on branch switches....

A network administrator configures DHCP snooping on VLAN 2. How does the switch handle DHCP traffic that arrives in this VLAN on an untrusted interface?

Refer to the exhibit. A network administrator wants to add the protections of root guard to the network. Based on the spanning tree topology, on which ports should the network admi...

An administrator's implementation plan for AOS-Switches calls for them to implement port-based tunneled node. The Aruba Mobility Controllers that will support the AOS-Switches run...

What is one difference between BPDU protection and root guard?

Refer to the exhibit. The exhibit shows configurations for interface 5 and VLAN 20. Note that DHCP snooping and ARP protection are also enabled. A network administrator finds that...

Refer to the exhibit. Switch-1 and Switch-2 connect and Switch-2 is configured to provide VRRP in VLAN 2. The default gateway for VLAN 2 is set to the VRRP virtual IP. Client-1 in...

What is a reason to implement PIM-DM as opposed to PIM-SM?

An AOS-Switch enforces 802.1X. It receives an Access-Accept with this HPE VSA from its Radius server: Attribute Name and ID = HPE-User-Role (25) Value = contractor The switch then...

Network administrators need to configure a BGP neighbor on an AOS-Switch. What defines the neighbor as an IBGP neighbor?

Refer to the exhibits. Exhibit 1 shows the topology for the network. The network administrator sees the log entries shown in Exhibit 2. Which type of failure is indicated?

An administrator manages AOS-switches, Aruba ClearPass, and Aruba AirWave. A network administrator needs to find the source of a performance issue that often occurs at the start of...

Network administrators are alerted to high interface utilization on a switch by a management solution. They examine the utilization on the uplink interfaces several times and find...

Every switch in the exhibit will route traffic. The company requires a topology in which failover for switch-to-switch links is exclusively handled by the routing protocol and occu...

Switch-1 is an AOS-switch that is operating at factory default settings for QoS and has type of service disabled. It receives a frame with 802.1p value 5 on trk1, on VLAN 2. How do...

An organization has a security policy for a company requires that switches use SNMPv3 and accept all read-only SNMPv2c messages. The network administrator enables SNMPv3. Which add...

The network administrator enters the commands shown in Exhibit 2, and Switch-1 and Switch-2 exchange keepalive messages. What is the expected behavior if Switch-1 later fails to re...

Two AOS-Switches connected on VLAN 10 in OSPF Area 1, which is defined as a stub area on both. Which mismatch can cause OSPF routers to lose adjacency?

A network administrator applies port security to a port with the send-alarm action. What does the switch do if it detects traffic from an unauthorized MAC address on the port?

Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?

An AOS-Switch which is configured to use captive portal and RADIUS to integrate with an Aruba ClearPass solution. What should the administrator do to enable the switch to accept ch...

A company does not require authentication for security, but AOS-Switches are set up to use local MAC authentication (LMA) to assign the correct VLAN and apply QoS policies. If the...