HPE6-A40 Exam Questions

Refer to the exhibit. A network engineer reviews the HA redundancy configuration of the Master and Local controllers shown in the exhibit. The engineer notices HA preemption is not...

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 A network support engineer tests the DHCP scopes design for a wireless network. The engineer finds that clients connected to...

Refer to the exhibit. In Aruba architect plans to design a network for a school with a single controller. Wired clients and APs on each floor are mapped to different VLANs. The VLA...

Refer to the exhibit. A network is configured with one master controller, one active local controller, and one standby local controller that use VRRP redundancy. All controllers ar...

An Aruba presales engineer works on a proof of concept (PoC) for a customer. As per the customer requirements, RAPs should be deployed at all home offices of employees who work fro...

Refer to the exhibit. The ap spectrum local-override command is issued at the controller CLI, as shown in the exhibit. What happens as a result?

Refer to the exhibit. A customer configures three different SSIDs with three different forwarding modes on a Remote AP (RAP-B). Client A1 connects to the Family SSID, which is in b...

A network engineer deploys LMS IP and Backup LMS IP technology in a master-local cluster. Which processes can occur with this configuration? (Choose two.)

How is AP redirected to a local controller after the DNS resolution returns the master controller IP address?

Review to the exhibits on the tabs. Exhibit 1 The exhibit shows truncated output from an Aruba controller. An unauthenticated user assigned to the logon role attempts to start n HT...

Refer to the exhibit. The network shown in the exhibits is configured with an active and standby controller that uses Layer 3 redundancy for AP termination. There are 100 APs provi...

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 A network engineer needs to deploy a Spectrum Analyzer (SA) and then monitor the 2.4Ghz and 5Ghz spectrum. As per the require...

Refer to the exhibit. A network engineer needs a solution that allows employees at the remote office to access the Internet and other local resources, such as printers and storage....

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 The exhibits display the output of "show" commands on the Master, local-1, and Local-2 controllers. Based on the output, what...

Refer to the exhibit. Based on the controller command output shown in the exhibit, what is the cause of the problem?

Refer to the exhibit. Which VLAN will be mapped to the user connected to Employee SSID?

Refer to the exhibit. A network has one master and two local controllers with 200 APs that provide an employee WLAN. The Master controller is configured with two AP groups, North a...

A network engineer plans to deploy RAP. The company requires RAP to have redundancy so that it can failover to another controller if the primary controller fails. Which RAP configu...

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 A company wants to deploy an Aruba solution with a master controller and a local controller along with 120 APs. The wireless...

A network has one master controller and two local controllers. The local controllers are located in remote branch offices with a WAN link to the HQ site. The master controller is l...

An Aruba 7210 Controller AP-125s are added to AirWave. The controller is added in managed mode to the AirWave group named Aruba. After the controller is added, users start to exper...

An Aruba 7205 controller functions as a standby master. How many Campus APs can it control while in standby mode?

Refer to the exhibit. A network engineer configures a guest WLAN for username and password authentication. As per the company requirements, guests should be authenticated through t...

Refer to the exhibit. Review the command outputs on the Master Controller6 shown in the Exhibits. All controllers in the cluster are Aruba 7220 controllers. What is the maximum num...

A network engineer plans to work on a guest provisioning account. The engineer wants to add the guest email and phone number fields in the account creation form. How can the engine...

A network engineer configures guest authentication for a WLAN. The company requires guests to get authenticated through the captive portal. The company's policy allows guests acces...

Refer to the exhibit. A network administrator troubleshoots a problem with VLAN 63 on a controller. The controller's output is shown in the exhibit. What should the network adminis...

A network engineer issues the aaa test-server pap RADIUS01 test aruba1 command on the Aruba controller CLI. This output displays: (Controller) #aaa test-server pap RADIUS01 test ar...

A user successfully connects to a captive portal enabled WLAN. When the user opens a browser and tries to access a webpage, the user gets redirected as expected to another URL on t...

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 FTP server: 10.1.1.100/24 TFTP Server: 10.1.2.100/24 DBMS Server: 10.1.0.3/16 Controllers: 172.16.99.0/24 Controllers: 172.16...

A controller is provisioned as a Layer 3 device for wireless clients. Wireless clients are not able to receive an IP address when they connect to the WLAN. What must be configured...

A network engineer configures for split tunnel mode on an RAP. Where is the routing function for the split tunnel defined?

What are valid Aruba VSAs that can be returned to a controller? (Choose two.)

Refer to the exhibit. A network engineer configures AP termination redundancy as shown in the exhibit. Which type of redundancy is configured for the AP Groups on the controllers?

Refer to the exhibit. The exhibit displays the rule configuration. A company uses an Aruba wireless network and decides to deploy AirWave to monitor and manage the network. A NOC e...

A network engineer troubleshoots a provisioned RAP backup SSID issue that occurs when a user tries to connect to the Internet from a hotel. The engineer lists the connection and se...

Refer to the exhibit. To support Guest SSID with tunnel-mode/Layer 3 deployment and Staff SSID with tunnel model/Layer 2 deployment, what must be configured on the trunk link betwe...

Refer to the exhibit. A network engineer assigns a VLAN pool with hash mode to a virtual-ap profile. The VLAN pool (includes VLAN 50 and VLAN 60 for Corp SSID, server will send Aru...

There are three controllers in a WLAN infrastructure one Master and two locals, Local-1 and Local-2. By default, which database will be used for guest captive portal authentication...

A network administrator wants to use AirWare to monitor controllers and APs. Which information must the administrator have to configure AirWave? (Choose two.)

A company network consists of a mix of Aruba wireless products and a few other vendors's AP. The network administrator thinks the problem is caused by an Aruba WIDS setting. What c...

Refer to the exhibits on the tabs. Exhibit 1 A network engineer deploys an Aruba solution in a company. The network engineer tests the local controller failover and observes an iss...

Refer to the exhibit. Based on the output shown in the exhibit, what is the roaming configuration for virtual-ap default?

Refer to the exhibit. A network engineer needs to stop broadcasting an Employee SSID temporarily at the training Campus (AP-3 and AP-4) site. As per the company policy, the enginee...

Refer to the exhibit. Airware 8.2 customer can view a wireless client that connects to the network, but cannot collect the client data information (such as healthy status) from Air...

Refer to the exhibit. An end user attempts to connect to the company's campus network and cannot find the enterprise SSID even though there is an AP operating engineer attempts to...

A network engineer plans for a corporate WLAN that must support 802.1X authentication. Based on HA best practices, the engineer plans to deploy a 7210 controller as an active local...

According to the client steering logic for sticky clients in the Aruba Client Match feature, what is true about the client movement to the new AP?

Refer to the exhibits on the tabs. Exhibit 1 Exhibit 2 A network engineer deploys AppRF on a testing SSID. All necessary command output lists are shown in the exhibits, and the SSI...

A network engineer designs a network with these requirements: HQ (master controller). Branch office-1 (local controller), and branch office-2 (local controller). Each site has a co...