HP2-Z34 Exam Questions

Refer to the exhibit An MPLS VPLS solution (non-hierarchical) will connect the sites shown in the exhibit Which pseudo wire (PW) connections must the administrator configure?

An administrator creates two VPN instances on an HP Comware switch, in addition to the public instance. The switch implements routing protocols and MPLS. Which statement is correct...

An HP Comware switch uses the MDC feature and has two MDCs defined.Administrators want MDC 1 and MDC 2 to be able to exchange traffic. How should the administrators complete the co...

Refer to the exhibit An administrator is setting up an MPLS Layer 2 VPN between customer Sites 1 and 2 and is defining the pseudo wire (PW) ID for this purpose. How should the PW I...

How does a non-hierarchical VPLS Martini solution prevent looping for broadcasts and multicasts?

A large data center needs to extend its Layer 2 connectivity and isolate tenants who might use the same VLAN IDs Which technology accomplishes this goal?

Refer to the exhibit. The exhibit displays a company with two data centers that connect by using EVl. The company needs a redundant solution for routing traffic between the subnets...

To provide redundancy, a company has multiple data centers that use server virtualization. What is a networking requirement for this scenario?

In addition to the Admin MDC, an HP Comware switch supports two MDCs: MDC 2 and MDC 3. The administrator wants to allow tenants for both MDCs to log in to CLI for their own MDC wit...

What is the purpose of the nickname in TRILL switch settings?

Several VPN instances have been set up on an HP Comware switch. What should the administrator do to ensure that no VPN instance uses up too many switch resources?

Refer to the exhibit. The company wants to use TRILL in the backbone links shown in the exhibit. Servers use VLANs 10, 20,and 30 and should be able to communicate across the backbo...

Refer to the exhibit. An administrator is setting up MPLS Layer 2 VPN connections between several customer sites and wants to send traffic that arrives on G1/0/1 with VLAN tag 102...

Which HP solution is an example of network function virtualization (NFV)?

A multi-tenant data center with 12 tenants has the following goals: - Isolate tenants to enable each tenant to have its own routing space Isolate the data center's services in its...

An HP Comware Switch 1 supports FCoE for connected servers with Converged Network Adapters (CNAs). On interface Ten 1/0/1 Switch 1 sends FCoE traffic in VSAN 2 to an upstream switc...

Refer to the exhibit An administrator is setting up this data center topology to use SPBM VMs in the same subnet should be able to communicate at Layer 2 and be isolated at Layer 2...

An HP Comware switch supports FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface Ten1/0/1 connects to a server FCoE Converged Network Adapter (CNA). The CNA will carry...

Refer to the exhibits. This data center topology is being set up to use SPBM. VMs in the same subnet should be able to communicate at Layer 2 and be isolated at Layer 2 from other...

Refer to the exhibit. These switches form an SPBM region. What is required for load balancing to occur across the links between these switches?

To support FCoE traffic, a switch port needs to use Application TLVs to communicate application priority information to a Converged Network Adapter (CNA). The setup process include...

Refer to the exhibit. - Use OSPF - Have established an MPLS domain. - Use LDP. - Have established a Martini Layer 2 VPN between Sites 1 and 2 VPN traffic is using the link between...

An HP Comware switch port is being connected to a server Converged Network Adaptor (CNA). The CNA and the switch port need to communicate about parameters for various priority flow...

Which advantage does a VPLS solution offer over a simple MPLS Layer 2 VPN solution?

An administrator configures two VSANs on an HP Comware IRF virtual switch. The IRF members connect to a server with two Converged Network Adapters (CNAs) One CNA is connected to VS...

Refer to the exhibit. PE-1 receives an IP packet that is destined to 10 1.10 10 and does not have an MPLS header. What does PE-1 do?

An administrator configures an HP Comware switch to support FCoE in Fibre Channel Forwarder (FCF) mode.A switch interface connects to a server Converged Network Adapter (CNA)which...

Refer to the exhibit. An administrator is planning an MPLS solution and wants to make sure that traffic from 10.1.0.0716 to 10.2 0.0/16 takes the best path. The solution is not usi...

Why might a customer decide to use MDC instead of Multi-VPN-Instance CE (MCE)?

Refer to the exhibit. An administrator is configuring an MPLS VPLS Martini solution on PE-1. The VPLS solution should connect customer A sites 1, 2, and 3. Where should the adminis...

An administrator configures an HP Comware switch to support FCoE in Fibre Channel Forwarder (FCF) mode A switch interface connects to a server FC host bus adapter (HBA). What is th...

What must be used when implementing the backbone multicast feature to isolate multicasts in the SPBM region?

Refer to the exhibit. An EVI network is being set up as shown in Exhibit 1. Part of Switch 1's configuration is shown in Exhibit 2 All other switches are configured correctly and c...

Which statement is correct about a FibreChannel (FC) node-port (N-port) in a Storage Area Network (SAN) fabric topology?

An HP Comware switch supports FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface Ten1/0/1 connects to a server FCoE Converged Network Adapter (CNA). The CNA transmits n...

Refer to the exhibit. An administrator is creating the EVI network shown in the exhibit Switches 1 and 2 are configured as ENDP servers. and Switch 3 is configured as an ENDP clien...

Refer to the exhibit. An administrator wants these switches to establish a TRILL region TRILL is enabled globally and nicknames are set. What must the administrator do so that each...

Refer to the exhibit. An administrator is establishing an MPLS domain to allow communication between 10.1.0.0/16.10 2 0 0/16. and 10.3 0.0/16. The solution will use OSPF routing an...

Which option is correct about the flash memory of an HP Comware switch with multiple MDCs?

Refer to the exhibit. A company added a second data center IRF 1 and IRF 2 connect on direct Ethernet cables. What is the simplest, most flexible and resilient option for the data...

What is an appropriate situation for configuring an interface as a silent TRILL access port?

Which statement is correct about defining a Route Distinguisher (RD) for a VPN instance on an HP Comware switch?

What is the relationship between a Forwarding Equivalence Class (FEC) and the MPLS label that a Label Switching Router (LSR) advertises for that FEC?

What is the correct use case for implementing priority flow control (PFC) on a switch port?

A company merger created a situation in which some network segments are using overlapping IP addresses. Administrators want to keep the overlapping addresses and isolate the segmen...

Refer to the exhibit. An MPLS Layer 2 VPN is being implemented between Sites 1 and 2. The administrator wants PE-1 and PE-2 to set up the Virtual Circuit (VC) dynamically by using...

Which statement is correct about a Fibre Channel (FC) World Wide Name (WWN)?

Refer to the exhibit. SPBM is being implemented on the backbone links shown in the exhibit. The servers in VLAN 10 (10.1.10.0/24) should be able to communicate at Layer 2 across th...

Refer to the exhibit. An HP Comware switch is configured to support FCoE in Fibre Channel Forwarder (FCF) mode.Serverl should be able to discover storage targetland target2. but no...

Refer to the exhibit. A VSAN is being set up on an HP Comware switch that will connect to server Converged Network Adapters (CNAs) and storage systems The administrator is checking...