HP2-T26 Exam Questions

Which memory configuration types are supported in the Gen8 ProLiant Blade servers? (Select two.)

Your customer has a business critical HP BladeSystem enclosure and wants to protect it with additional service coverage. The company's requirements are 24x7 and functionality must...

After replacement of a BL460c G7 system board, the server is unable to connect to an external shared storage through the SAS interface. Other similar servers in the same enclosure...

You installed an FC HBA in mezzanine slot 2 of a BL460c G6 in a c7000 enclosure. In which interconnect bays should the FC interconnect be installed?

HP HP2-T26 Exam How many half-height blades can you install in the enclosure shown?

Where can you verify the status of an external DVD-ROM drive in a c7000 enclosure?

You are installing a new HP BladeSystem c7000 enclosure. The customer wants to configure the iLO and interconnect IPs so that they are automatically maintained during a hardware sw...

A customer is installing a new drive in a BL460c Gen8. None of the LEDs on the drive are lit. What is a possible cause?

What should you use to check the overall health status of all the BL460c Gen8 servers you recently installed in a c7000 enclosure?

Which step must be done after the system board is replaced on a BL460C G6?

A customer has a c7000 enclosure that is fully populated with BL680c blades. Two months after the initial installation, the rack initiates a thermal shutdown. When diagnosing the p...

You need to capture the configuration and support dump of several Virtual Connect domains. Which tool can be used to perform this action from a central system?

How does humidity affect a data center? (Select two.)

Both the c3000 and c7000 chassis have a capacity for a maximum of six power supplies. Which feature does the c3000 have that differentiates it?

After executing a troubleshooting plan, which tools may provide indications of a successful remedy in step 5 of the 6-step HP Troubleshooting Methodology? (Select two.)

Step 5 of the 6-Step HP Troubleshooting Methodology requires verification that the repair was successful. Which authorized tool provides this information for ProLiant servers?

What should you do to replace a defective Standby Onboard Administrator (OA) in a c7000 enclosure?

A customer is experiencing intermittent storage connectivity issues in their BladeSystem environment. After collecting the log files from the external storage system and the interc...

A system engineer wants to replace the c3000 BladeSystem Insight Display. What must be done before the engineer can remove it? (Select two.)

You want to connect to a ProLiant Server Blade that has the iLO port available. What must you do to connect a laptop for a direct connection to the Onboard Administrator?

Which CLI commands can be used to determine if networking has been configured properly in Windows? (Select two.)

What happens during a Virtual Connect configuration restore?

HP HP2-T26 Exam When performing a backup of a Virtual Connect configuration, where is the configuration file saved?

Which information can the user access from an HP Array Diagnostics Utility (ADU) report? (Select two.)

What provides information on the software inventory of a server and available updates?

HP HP2-T26 Exam A c7000 connected to an MDS600 is not working as expected. Several times a day, blades lose connectivity to their assigned disks. Your manager asks you to develop a...

A customer is experiencing drive encryption issues with a BL490c Server Blade running Microsoft Windows Server. The Trusted Platform Module (TPM) is suspected as the cause. What mu...

After the replacement of an HP StorageWorks Ultrium Tape Blade, the new unit should be tested. What is the recommended diagnostic and support tool for c-Class tape blades?

Which action should you take first when the Insight Display goes dark?

Refer to the exhibit below. From the main menu shown in the exhibit, which menu should you select HP HP2-T26 Exam from Insight Display to check the Onboard Administrator Service IP...

Which capability does Intel QuickPath technology provide?

Which method should you use to remove a jammed cartridge from a tape blade?

Which HP c-Class server blade series only supports non hot-plug SATA drives?

How many processor sockets does the HP BL870c c-Class Integrity Server Blade have?

A rack with a c7000 is to be relocated to a remote location. What should be used when moving the rack to ensure no damage will occur to the enclosure?

Which mezzanine card is compatible with the HP ProCurve 6120XG interconnect?

When a customer is using a StorageWorks 3Gb SAS BL Switch in the c7000 enclosure, what can be connected?

What is the default ASR timer value after the HP Server Health driver is loaded? HP HP2-T26 Exam

When installing half-height c-Class server blades in a c3000 rack enclosure, what is the recommended sequence for installing them into the server bays when viewed from the front of...

You replace a fully buffered DIMM and want to verify it by running the ROM-Based Memory Test. Where can you access this test?

If time is critical and all memory tests in the HP Insight Diagnostics Offline Edition cannot be run, which memory tests should be run? (Select two.)

What do you use to access RBSU to retrieve information?

A BL490c G6 processor has been replaced. The customer wants the new processor to be tested for several hours before placing the server blade back in service. In order to accomplish...

Where can you find video clips of Field Replaceable Unit (FRU) removal/replacement procedures?

Which statements are true about Online Spare memory banks? (Select two.)

A customer installs HP Network Configuration Utility on their ProLiant server and wants to see if the TOE and RSS features have been enabled for the NICs. Which file under c:\progr...

A server blade has a memory error. All the LEDs in all the banks are illuminated. What should you do first to address this issue?

A customer has an SB40c paired with a full height blade. The blade cannot access the SB40c storage. Which component in the blade may need to be replaced?

What should be done after a repair has been validated?

When you try and boot a previously installed operating system, a BL495c G6 Server Blade freezes. What is the first step you should take when troubleshooting this problem?