HP0-Y45 Exam Questions

A network architect is working with a customer to plan an 802.1X solution for authenticating employees to a WLAN. The customer has these requirements: - The solution is as easyas p...

A data center has a traditional three-tier network design with routing at the distribution layer. The customer is virtualizing its servers and adding technologies such as the migra...

Which customer requirement is mostly likely to cause the network architect to search for an HP alliance solution?

A network architect is planning a BladeSystem solution for a customer. The server blades require connections for these purposes: - Connections to the data center LAN - Fibre channe...

Your customer is concerned that adding an 802.11n-compliant access point will overload the network infrastructure where the controller connects to the network. How would the HP opt...

How many ports in a legacy three-tier network are typically used just to interconnect the switches?

The FlexNetwork architecture is tailored to the needs of which business size?

Refer to the exhibit. The branch switches and the HP intelligent Resilient Framework (IRF) group shows in the exhibit implement Open Shortest Path First (OSPF). The IRF group acts...

A network architect has designed a two-tier topology for the campus LAN and is planning to implement routing at the core. Which requirement might cause the network architect to con...

What is the benefit of implementing an HP solution in multisite phases as opposed one phase?

A network architect is planning the access layer for a campus LAN that must support 10,000 edge ports in one large building with four floors. The customer has these preferences and...

An employee takes the company laptop offsite and connects it to an insecure network. A hacker is able to deploy a malware application to the laptop. The employee takes the network...

Refer to the exhibit. A network architect is processing to a customer. The customer network manager has a performance for Cisco Per-VLAN Spanning Tree Plus (PVST+) because this pro...

A customer needs a storage solution that uses the current IP network and delivers data to serves in the manner of a file server. Which family of solution meets this need?

Refer to the exhibit. The exhibit shows the topology for an enterprise campus LAN. The customer has these additional requirements: - Employees willneeds a wireless networkthat they...

A network architect is planning a guest solution for a group of ports in a conference room. Guests should have access to the internet only. The company wants a single solution pref...

Which statement about HP Intelligent Resilient Framework (IRF) is true?

What are two ways that the HP products positioned at the core of mid-sized business HP FlexCampus solutions, as well as the products positioned at the edge, promote environmental e...

Which HP technology enables IT to add new server blades, replace failing blades, or move blades around in the chassis without having to reconfigure the network?

What distinguishes user acceptance tests (UATs) from validation tests?

A network architect is working with a customer and needs to understand the regulatory compliance, contractual agreements, and service-level agreements (SLAs) that apply to the comp...

A network architect is planning a solution for a customer's campus LAN. The customer has a existing network that consists of three tiers. The new HP switches are being deployed at...

A network architect is designing a Multiple Spanning Tree Protocol (MSTP) solution for a network. The network architect plans to create two MSTP instances for 10 VLANs. The network...

A customer has a solution that continuously backs up date for critical services to a disaster recovery site. The customer requires a one hour recovery point objective (RPO) and a 9...

Refer to the exhibit. The exhibit shows a network with HP 3500 yI Series switches at the access layer and HP 8206 zI switches at the core. The customer with solution has logged sev...

Refer to the exhibit. A network architect has planned redundant links, as shown in the exhibit. What should the network architect do to ensure that the redundant link design is tru...

Refer to the exhibit. The exhibit shows a proposed design for a data center network infrastructure. The exhibit only shows two racks for simplicity. The data center will actually i...

A network architect is designing a Fibre Channel (FC) SAN solution for a company. The network architect needs the number of inter-switch links (ISLs) between FC switches relative t...

Refer to the exhibit. A network architect is designing the logical topology for a campus LAN networking solution. The customer requires support for 2400 edge ports, which is provid...

Refer to the exhibit. Employees connect on wired connections, which are secured with 802.1X. Employees can also connect to a WLAN that enforces Wi-Fi Protocol Access 2 (WPA2) and 8...

A physical server connects to two Fibre Channel (FC) switches. The server supports eight virtual machines (VMs) with VMware version 5.1. The VMs need to be zoned and given access t...

A customer is seeking an upgrade for their campus LAN network. Currently the customer has access layer switches that support 48 10/100/1000 Mbps ports and one Gigabit uplink. The c...

A physical server has 6 NICs and supports eight virtual machines (VMs). NIC 1 and NIC 2 connect the VMs to the data Center LAN. The two NICs are intended to provide load balancing...

A network architect has planned several validation tests and user acceptance tests (UATs) for a new HP solution. In order to ensure meaningful results, what is one step that the ne...

Refer to the exhibit. A customer is gradually moving to an IPv6 environment. Currently, the customer needs an IPv6 application in Zone A to communicate with the server for the appl...

A network architect is compiling information about the total cost of ownership (TCO) for a proposal. Which factors play a role in TCO?

A network architect needs to schedule a network outage for migrating to a new HP solution. What primarily determines the maximum length for the outage?

Refer to the exhibit. Which level of SAN availability does this design fulfill? (The levels are listed from 1 to 4 Level 1 is the lowest, and level 4 is the highest)

A network architect is planning a complete access layer and core upgrade for a customer's campus LAN. The campus has four large buildings, each requiring between 1000 and 3000 edge...

A customer requires a storage solution that can be backed up to a disaster recovery site, which the source data center reaches over 10G Ethernet connections. The storage solution s...

Refer to the exhibit. The exhibit shows the uplink that the blade servers use to reach the data center LAN may carry traffic from VLAN2.4.6 or 8, or some combination. A network arc...

A customer has a virtualized data center and these key requirements: - The customercan scale any applicationand easily install new hardwarethat supports that application. - The net...

Which description best characterizes current trends in deploying services for an enterprise solution?

What are information technology service Management (ITSM) frameworks, such as the Infrastructure Technology Infrastructure Library (ITILv3) and The Open Group Architecture Framewor...

Refer to the exhibit. The exhibit shows how two NICs on a physical server connect to two HP 5820 switches. The server supports eight virtual machines (VMs) with VMware version 5.1....

A network architect is planning an HP MultiService Mobility for a customer. The solution is intended to provide wireless access for employees various branch locations. The solution...

Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?

A network architect is planning the products that will interconnect a main site campus LAN, Branches, and data center (located at the different site from the main campus). Which cu...

Refer to the exhibit. A network architect has designed the topology in the exhibit. The Gigabit links between layer and the core uses OM3 grade multi-mode fiber between 100m and 15...

A network architect is working with a customer to implement a new network design. The network architect has learned that the company has a legacy application hosted on a number of...