A network administrator plans to use HP Intelligent Management Center (IMC) to manage a network with thousands of HP switches. The administrator wants to use IMC for functions such as configuring…

Question

Options

• ATelnet Username: Enter the username configured on managed devices in the Telnet
• BTelnet Password: Enter the password configured on the managed devices in the Telnet
• CTelnet Super Password: Enter the super password configured on the managed devices for the
• Dthat IMC is configured with the proper SSH login username and password for the switches

• A
  16% (7)
• B
  70% (31)
• C
  9% (4)
• D
  5% (2)

Explanation

Auto discovering in IMC allows you to search the network and add all found devices to IMC using two methods: basic and advanced. With the basic auto discovery method, you provide a start and end IP address that directs the discovery process. In addition, you provide SNMP and Telnet settings that support the addition of devices for these protocols. You have the option to run basic and advanced discoveries immediately or at a scheduled date and time. Note 1: On IMC auto discovery: Enter the SNMP v1 read community string in the SNMP Read Community string field. 11. Enter the SNMP v1 write community string in the SNMP Write Community string field. The SNMP read and write community string configuration you enter here must match the SNMP configuration settings on the devices to be discovered and managed. Refer to each vendor's manual for information on setting the SNMP configuration parameters for each device type. In the basic auto discovery mode, only SNMP v1 is supported. Note 2: On IMC auto discovery continued: Select the Telnet authentication mode that corresponds with the Telnet authentication mode configured on the managed devices from the Telnet Authentication Mode list. Do the following: Username field, if prompted. Password field, if prompted. Telnet Super Password, if prompted.

No community discussion yet for this question.