H31-161 Exam Questions
190 real H31-161 exam questions with expert-verified answers and explanations. Page 3 of 4.
- Question #101
RTA is a provider edge (PE) router. OSPF is deployed between RTA and a customer edge (CE). Which of the following can be used to avoid routing loops when RTA generate an autonomy s...
- Question #102
Exhibit: As shown in the figure, external route 1.1.1.0/24 is imported to RTA that is located in the NSSA area RTD is a backbone area router. RTB and RTC are both area border route...
- Question #103
1. On the backbone network , if a PE is connect to a CE, VPN instances need to b reconfigured on the PE, and interface on the PE for connecting to the CE must be bound to a VPN ins...
- Question #104
As shown in the figure. CE 1 and CE 3 belong to VPN-A, and CE 2 CE 2 4 belong to VPN-B VPN-target VPN-A is 111:1 and that of VPN-B is 222:2 users on different VPNs are not allowed...
- Question #105
Exhibit: As shown in the figure, RTA belongs to AS 100 and has an EBGP neighbor relationship with RTC, RTD, and TTB is an IBGP neighbor of RTC, RTD, and RTE, and the four router al...
- Question #106
Exhibit: As shown in the figure, RTA and have one BGP session. To detect fault fast, the BFD for BGP feature needs to be configured on RTA and RTB. BGP-related configurations are a...
- Question #107
Exhibit: As shown in the figure, virtual private LAN service (VPLS) is enabled on routers PE 1 and PE 2.CEs are connected to PEs through QinQ and PC A and PC B are connected to the...
- Question #108
Exhibit: As shown in the figure, Super VLAN is enabled on SWA (a LAN switch). The Super VLAN configuration is as follows: Which of the following specifics the time order in which t...
- Question #109
Which of the following statements about VLAN communication are true? (Select multiple)
- Question #110
Configure VRFs and relevant policies on a PE as follows: If a route is imported to the routing table of VRF 1, which VRF can the route match?
- Question #111
Which statement about the configuration of route target (RT) and route distinguisher (RD) is true?
- Question #112
Which statement about the Hub s MPLS VPN networking is false?
- Question #113
Exhibit: Which statement about inter-AS MPLS VPN Option_B is false?
- Question #114
Exhibit: As shown in the figure, inter-AS VPN Option A is used. CE 1 and CE 2 belong to the same VPNAS 100 and AS 200 run IGP and LDP, respectively. ASBRs communicate with each oth...
- Question #115
Which of the following statements about the merits of the HoVPN networking are true?
- Question #116
Exhibit: As shown in the figure, OSPF process 100 runs on both PEs and CEs, and VPN routers are transmitted between PE 1 and PE 2 through PGB CE 1 enables interface address 43.1.1....
- Question #117
As shown in the figure, a CE requires access to the internet , and PE 1is connected to the gateway. Configurations on PE 1 are as follows: PE 1 is connected to the internet gateway...
- Question #118
Which statement about primary VPN tunnel binding is false?
- Question #119
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels...
- Question #120
Which of the following statements about control words in the L2VPN are true?
- Question #121
Which of the following statements are correct? (Select multiple)
- Question #122
Which of the following statements about the VPLS packet forwarding are true?
- Question #123
Exhibit: As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements needs to be met. VPNA-CA 1 can interw...
- Question #124
On a VPLS network a PE router receive a packet that containers layer 2 user data from a PE. How does the PE router determine the source VSI of this packet?
- Question #125
When the RSVP LSP FRR protection is enables, which of the following statements about the original RSVP LSP are true?
- Question #126
As shown I the figure, the asymmetric VLL FRR networking is used AC interfaces on PE 1, PE 2 and PE 3 are configured as follows: Which of the following statements are the true on t...
- Question #127
Which of the following statements about the working principle f LDAP FRR are true?
- Question #128
In MPLS QoS , traffic policies are developed on simple traffic classified and complex traffic classification policies based on simple traffic classification the service class color...
- Question #129
Exhibit: As shown in the figure, RTA connects to RTB and RTC A TE tunnel is configure on RTA to reach RTC. The TE tunnel cannot be successfully established. However, CSPF-based cal...
- Question #130
Which of the following statements about BFD for MPLS LSP are true?
- Question #131
Which statement about the MPLS LSP Ping is true?
- Question #132
Which of the following values is the default preference value for static route on the VRP platform?
- Question #133
Which statement about the MPLS LSP traceroute is true?
- Question #134
Exhibit: RTA is an edge route of the MPLS backbone network. It provides the access for users under layer 2 switches and differentiates user by subinterface. User access VALN 100 an...
- Question #135
Exhibit: As shown in the figure, complex traffic classification is configured for RTA's upstream GigabitEthernet 1/0/0. The QoS is configured as follows: A tester sends TCP packets...
- Question #136
The inner VLAN tag in layer 2 user packets is used to differentiated key services from other services. If packets are not processed after being encapsulated by QinQ, the 802. 1p in...
- Question #137
On a router, HQoS parameter are configured for the users. The CURP of user 1 is Mbit/s. The CUR and PIR of user 2 are 0 Mbit/s and 10 Mbit/s, respectively. The CIR and PR of user 3...
- Question #138
Exhibit: RTA is an edge router of the MPLS backbone network. It provides the access services for users under Layer 2 switches and different users by subinterface . User A access VL...
- Question #139
An interface sends 300 Mbit/s user BE traffic. The downstream HQoS scheduling is configured at this interface as follows SQ: cir 15 Mbit/s pw 200 Mbit/s FQ. queue be Ipq shaping 10...
- Question #140
Exhibit: The preceding information shows the configurations of Ethernet 6/1/1 and ensure created based on received IGMPv2 Report messages. Which action does Ethernet 6/1/1 after re...
- Question #141
Which of the following are the disadvantages of using static routing protocol in the network? (Select multiple)
- Question #142
Interface Ethernet 3/1/0 is configured as follows: Ethernet 3/1/0 receives multicast group 232 0.0.31 IGMFV2 Report messages, If no multicast traffic sent to group 232.0.31 can be...
- Question #143
Exhibit: Which of the following statements are false?
- Question #144
If a (*, ) entry exists in the RP, Which of the following statements about the source registration are true in PIM_SM?
- Question #145
Which of the following reserved IP multicast addresses is the address of all PIM routers?
- Question #146
In the inter-AS multicast, which statement about transmitting MSDP SA messages is false?
- Question #147
The Huawei router is the hop RD where the SSM mapping function is enabled at the interface. Some IGMPv2 hosts expect to receive (1.0.01,232.1.0.1) (1.0.0.1232.1.0.2), and (2.0.0,23...
- Question #148
RTA is a leaf router that directly connects to host A through interface GigabiteEthernet 1/0/0. The interface is configured as follows: Hos a sends a IGMPv2 Report message to group...
- Question #149
On the OSPF network, which of the following statements about the authentication function of the OSPF protocol are true?
- Question #150
An Ethernet cable connects RTA to RTB through Ethernet 0/0.the OSPF neighbor relationship can be established without enabling the OSPF authentication function is enabled, Which of...