EW0-200 Exam Questions

You can only use the RMON features on the Extreme switch if you have an RMON management application, and have enabled RMON on the switch.

Passwords for login names on ExtremeWare CLI accounts are case-sensitive.

In order to set the OSPF router ID to 192.168.0.1 in area 7.7.7.7 which of the following CLI commands should be used?

If you want to clear all the log entries, you have to type the following CLI command:

The Summit 7i has a capacity of 64Gbps and can forward 48 million packets per second.

Which of the following routes will be used to forward a frame to 192.168.1.174?

What is the meaning of the following CLI command: con ipr a bl 10.11.12.0/24?

Autonegotiation is enabled by default on all Ethernet ports of an Extreme switch.

Which CLI command would enable you to schedule a configuration upload to occur at regular intervals?

Which CLI command would you use to create a default route with a metric of 5 and a gateway of 10.0.0.1?

IP Forwarding is enabled by default only on the pre-configured VLAN DEFAULT.

What is the default IP RIP route advertisement timer value?

Which CLI command would provide the following information for the default VLAN only?

What information is provided by the CLI command: show version? (Choose all three that apply)

The Summit5i provides a total of 16 user ports from which 12 are either 100/1000 Ethernet (RJ- 45) or 1000 Ethernet (MT-RJ) and the last 4 are unpopulated GBIC-based 1000BASE-X por...

What information can you find using the CLI command show edp?

ExtremeWare provides two release strategies, General Deployment and General Availability. The first is a stable release strategy with successive versions including bug fixes. The G...

On an Extreme Summit 7i switch the following traffic is handled by the CPU.

Which CLI command will list the ports involved in load sharing and also identifies the master logical port?

What information is not provided by the CLI command: show version?

ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard protocols to ensure interoperability with legacy switches and routers, QoS for band...

The default setting for spanning tree on an Extreme Networks switch is?

Which of the following does not create entries in the routing table?

What type of an OSPF area is used to limit the distribution of external routes?

ExtremeWare can automatically upload the active configuration to an FTP server.

When a host, using TCP/IP, communicates with a destination outside its VLAN it relies on the configured default gateway. What is the destination MAC address in an Ethernet frame se...

You have been assigned the task of configuring an 8-port load share group between two switches that use the address-based algorithm. Which of the following commands will provide yo...

The ExtremeWare feature VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.

In addition to maintaining an internal log, the switch supports remote logging by way of the UNIX syslog host facility. What would you do to enable remote logging on an Extreme swi...

The modular BlackDiamond 6816 switch offers how many slots?

What will this CLI command accomplish: config vlan accounting protocol Appletalk?

How many steps (packets) does it take to close a TCP session?

What is the purpose of the Spanning Tree Protocol listening state?

OSPF is a link-state type of routing protocol.

Which CLI command would you use to configure the switch to ignore STP for selected VLANs?

Given the following information, select the option that would allow you to change the active ExtremeWare version to 6.1.9b11 upon reboot.

BGP, OSPF and RIP are interior gateway protocols supported by ExtremeWare.

What is one of the functions of the ISO/OSI data-link layer?

The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This will allow the administrator access to the CLI.

You need to add 192.168.0.254 as a trap receiver with a community of SECRET on an Extreme switch. How will you do this?

An Ethernet port cannot be added to two VLANs as an untagged port, with the following exception:

This CLI command is valid: configure vlan default ipaddress 10.10.1.1/24 255.255.255.0.

What happens if the following CLI command is executed? create fdbentry 00:E0:2B:12:34:56 vlan corporate port 4

The CLI command to create a new user account named Bill with no password is: create account user Bill password none.

Which CLI command would you use to configure proxy ARP for IP address 10.0.0.1/24 with MAC address 00:11:22:33:44:55 so that it will respond regardless of the VLAN?

How many unique physically MAC addresses has a Summit 48i switch?

ExtremeWare supports ECMP for which of the following routes? (Choose all that apply)

Before ExtremeWare will route packets between VLANs on the same switch, the following must be configured:

What is the maximum number of VLANs that can be tagged on a single link between Extreme Networks switches.

What information will the CLI Command how edp?provide?