E20-260 Exam Questions

What three elements are part of the VPLEX Storage View?

A host attempted a read from a volume in a VPLEX Metro configuration. The data does not exist in cache at all. What process does VPLEX use to service the read request?

In the distributed cache architecture, how much local cache does a VS2 director have?

Which command allows you to navigate vplexcli history by string?

Which command-line option can be invoked within VPlexcli as a task to recognize and use new LUNs provisioned to a cluster?

In which directory is a session log file created whenever the Management Console is launched?

You are using VPLEX Unisphere to perform management functions in your environment. You are tasked with creating several volume migrations to a new storage array. What tab should yo...

Following EMC best practices, what information is required to register a VPLEX on an ESRS portal?

When inspecting a VS1 director's status LEDs, you see that a status LED is blue. What does this indicate?

You are preparing a site for a large Metro VPLEX cluster. The storage administrator wants to prepare the storage network configuration and needs to ensure easy troubleshooting of s...

You are preparing a site for a large Metro VPLEX cluster. The storage administrator wants to prepare the storage network configuration and needs to ensure easy troubleshooting of s...

What can you use to generate a list of VPLEX fabric initiator and target identifiers?

When configuring a VPLEX local cluster, according to EMC best practices, how many metadata volumes are required?

You are configuring a single engine VPLEX Metro to support both local and distributed volumes. The VPLEX will utilize 10Gb WAN-COM modules in a routed configuration. According to E...

Which VPLEX component is configured with a public IP address during the installation process?

You are configuring an FC Switch for a VPLEX implementation using VS2 engines. What is the required speed setting for the switch ports connected to the VPLEX FE ports in order to a...

What are the recommended protection and disk type when selecting a VPLEX Logging Volume?

In addition to Active Directory, with what other directory service can VPLEX integrate for user authentication?

A customer has ordered a two-engine VPLEX cluster to be installed in a custom rack. A minimal VNX5300 is already installed in the middle of the rack, occupying nine rack unit space...

What information is required to configure ESRS for VPLEX?

According to EMC best practices, how many metadata volumes for a VPLEX Metro configuration are required on each cluster?

Which VPLEX management NIC Interface must be connected to customer IP public LAN?

Which VPLEX management interface is used for initial configuration?

Where is the wwn-seed physically located on VS2 engines?

A customer has ordered a new VPLEX, and you are on site doing the initial installation. When creating metadata volumes for the VPLEX Local configuration, the customer asks you how...

You are zoning a dual-engine Local VPLEX cluster to a Symmetrix array to see LUNs 0010 and 0020 for metadata backups. How many directors in the cluster must be zoned and masked to...

A customer has purchased a dual engine VPLEX Metro cluster. During installation, there are not enough free SAN ports to connect all WAN-COM ports to the SAN. What is the recommende...

What is the EMC best practice for the optimum number of back-end storage paths per director presented to a LUN?

When configuring a RAID-1 logging volume, what flags must be used in the command line?

What is EMC's best practice for fault tolerance when zoning a VPLEX Metro together over fibre channel for successful communication between the sites?

During the installation of a small VPLEX Metro, the command `configuration continue-system- setup' is issued. What is accomplished by this command?

You need to claim storage that is presented to VPLEX from a VNX. What is required in order to create the mapping file needed by the VPLEX Claim Storage Wizard?

When performing an installation you notice DHCP has set your Management Server subnet mask to 255.255.255.252. Based on EMC best practices, what is the appropriate subnet mask valu...

After registering Cluster-2 with ESRS during a VPLEX Metro cluster build, what is the next step to perform before the cluster is successfully built?

What VPLEX user account is required to manage user security?

What is required of an ESX host for the Witness to be installed?

A customer has a VPLEX Metro/GEO environment and is requesting that the VPLEX Witness be installed. The requirements for the Witness are: - One vCPU - 512MB ram - 2.5GB storage spa...

Which element does VPLEX Witness require?

A customer has a VPLEX Metro with VPLEX Witness installed and configured. The detach rule for consistency group is "no-automatic-winner". What will VPLEX Witness do in case of a Si...

A customer is performing maintenance on their network that might affect their VPLEX Witness VM. What can be done to ensure there are no adverse effects due to a Witness outage?

Which VPLEX component can determine the difference between a partition and a site failure of a VPLEX Metro configuration?

During an installation, the physical equipment inspection reveals an ESX host used for VPLEX Witness is located in the same rack as VPLEX cluster 1 Engine. What needs to be done?

During ndu pre-check, a partner found that metadata-backup is not working. In addition, metadata-backup volume components have been renamed. How can the problem be resolved?

A customer is verifying the host environment before scheduling a VPLEX NDU. According to EMC best practices, which PowerPath load-balancing policy is applied by default to all plat...

Which vplexcli command will ensure that the directors SSD firmware has been upgraded to the correct version after the VPLEX NDU ?

You have attempted to upgrade a VPLEX system to the latest Geosynchrony code. During the upgrade, an error appeared and caused the upgrade to fail. Which file should you review to...

How do you verify that the VPLEX upgrade has completed successfully?

VPLEX ndu pre-check command reports a time drift between directors and the Management Server. How must the NDU be performed?

You are doing a code upgrade on a VPLEX. In which directory do you put the upgrade files in order to execute the code upgrade?

You are planning to perform a topology upgrade of VPLEX Local to VPLEX Metro. What is the process you should follow to complete the upgrade successfully?