Dell
DNDNS-200 · Question #46
DNDNS-200 Question #46: Real Exam Question with Answer & Explanation
Sign in or unlock DNDNS-200 to reveal the answer and full explanation for question #46. The question stem and answer options stay visible for context.
Question
A network engineer is implementing MLAG using two N-Series switches. MLAG must be set up with 10 Gb ports and connecting to a single S-Series switch that will be the host for the MLAG. Both N-Series switches will be physical devices with two dedicated 10 Gb ports on the N-Series switches and a connection to the S-Series. Both N-Series switches are configured with the correct IP address and a connection to the S-Series switch has already been assigned an IP address. Which set of commands should be used to meet the requirement for MLAG?
Options
- Aconsole#conf#interface port-channel 1 console(conf-if-po-1)#channel-member fortyGigE 0/33 console(conf-if-po-1)#channel-member fortyGigE 0/37 console(conf-if-po-1)#no shutdown console(conf-if-po-1)#switchport link port-channel 1 console(conf-vlt-domain)# exit console(conf-if-po-1)#no switchport console(conf-if-po-1)#portmode hybrid console(conf-if-po-1)#switchport console(conf-if-po-1)#no vlan tag port-channel 128 console(conf-if-po-1)#no shut console(conf-if-po-1)#exit
- Bconsole#configure console(config)#vlan 10 console(config-vlan10)#exit console(config)#interface port-channel 1 console(config-if-Po1)#switchport mode trunk console(config-if-Po1)#vpc peer-link console(config-if-Po1)#exit console(config)#interface range tengigabitethernet 1/0/1/-2 console(config-if)#channel-group 10 mode on console(config-if)#exit console(config)#interface port-channel 10 console(config-if-Po10)#switchport mode trunk console(config-if-Po10)#switchport trunk native vlan 10 console(config-if-Po10)#vlan 10 console(config-if-Po10)#exit console(config)#interface tengigabitethernet 1/0/20 console(config-if-Te1/0/20)#channel-group 10 mode active console(config-if-Po1)#vlan 20 console(config)#feature vpc console(config)#vpc domain 1 console(config-vlt)#vlt-peer keepalive enable console(config-vpc 1)#exit
- Cconsole#configure console(config)#vlan 10 console(config-vlan10)#exit console(config)#interface port-channel 1 console(config-if)#spanning-tree enable console(config-if)#switchport mode access console(config-if)#vpc peer-link console(config-if)#exit console(config)#interface range tengig 1/0/1/-2 console(config-range-if)#channel-group 1 mode on console(config-range-if)#exit console(config)#interface port-channel 10 console(config-if-po)#switchport mode trunk console(config-if)#vpc 10 console(config)#interface tengig 1/0/20 console(config-if)#channel-group 10 mode active console(config-if)#exit console(config)#feature mlag console(config)#mlag domain 1 console(config-mlag)#mlag no disable console(config-mlag)#exit
- Dconsole(config)#interface vpc 1 console(config-if-vpc)#no shut console(config-if-vpc)#exit console(config)#interface peer-channel 10 console(config-if-po)#vpc peer-link console(config-if-po10)#no shut console(config-if-po10)#exit console(config)#interface port-channel 1 console(config-if-po1)#vpc 1 console(config-if-po1)#no shut console(config-if-po1)#exit
Unlock DNDNS-200 to see the answer
You've previewed enough free DNDNS-200 questions. Unlock DNDNS-200 for full answers, explanations, the timed quiz mode, progress tracking, and the master PDF. Question stem and options stay visible so you can still see what's on the exam.