CWDP-305 Exam Questions
331 real CWDP-305 exam questions with expert-verified answers and explanations. Page 3 of 7.
- Question #101
When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?
- Question #103
In high-density environments, such as stadiums and convention centers, what extra factor has to be taken into account that can attenuate Wi-Fi signals when these environments are h...
- Question #104
What document is typically created to launch a project?
- Question #105
Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use...
- Question #106
Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based typ...
- Question #107
A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not be forgotten by their Wireless Engine...
- Question #108
You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?
- Question #109
A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room. How...
- Question #110
A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum. What should you do to meet this requirement?
- Question #111
An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely...
- Question #112
You and 10 other people are connected to a public hot-spot. You issue a ping sweep on the network, but you can't find any devices on the same subnet as yours. What feature might be...
- Question #113
During an RFP analysis, one of the vendors mentioned that you'll need to upgrade your Gigabit Ethernet switches to MultiGig switches to ensure support for 802.11ac and 802.11ax, wh...
- Question #114
A customer is acquiring a new VoWLAN system to replace their existing wired phone system. When reading about his system's requirements, you learned that is requires 25 db of SNR to...
- Question #115
You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice...
- Question #116
After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?
- Question #117
Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room. When doing a walkthrough using one of these laptops, you confirm that it is u...
- Question #118
When designing a static channel plan for an office using voice devices near an airport, which range of channels should be avoided to ensure optimal performance when implemented?
- Question #119
What is the most suitable antenna option to be used when designing a WLAN infrastructure with APs mounted on a ceiling with a height of more than 20 feet and having all of the clie...
- Question #120
When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW. What should be EIRP of the APs in th...
- Question #121
Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have o...
- Question #122
When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi USB adapters to collect RSSI data and two USB spectrum analysis adapters to collect RF spe...
- Question #123
What is the most cost-effective way to accurately measure the height of a ceiling when ladder use is not allowed?
- Question #124
You performed a site survey with two USB Wi-Fi adapters using a special driver written for the site survey software. After deployment, you realized that the client devices used by...
- Question #125
When performing an active site survey in an existing WLAN infrastructure, in addition to gathering throughput data, what other important function will you typically be testing at t...
- Question #126
Why should band steering algorithms allow stations to connect to the 2.4 GHz band after some number of ignored Probe Requests?
- Question #127
After designing a WLAN infrastructure using predictive design software. What's the best way to validate the predictive design in the physical space before deployment, if time and b...
- Question #128
Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EA...
- Question #129
Your customer requires fast secure roaming. Which two types of roaming are specified in 802.11-2016 FT roaming that will help meet this goal?
- Question #130
What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?
- Question #131
When deploying APs outdoors, what additional component needs to be used that is not needed indoors?
- Question #132
Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?
- Question #133
What limitation exists when WMM is not enabled on an 802.11n WLAN?
- Question #134
Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?
- Question #135
What service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?
- Question #136
What is the best method of gathering attenuation measurements from any building materials or objects?
- Question #138
What document should be created that provides instructions for install technicians to mount and configure APs?
- Question #139
In addition to a copy of your design, which tools should you use to ensure the installation team deploys APs where you have them designed to be located?
- Question #140
When installing APs on high ceilings, what should be the most common PPE to be used?
- Question #141
You're preparing to perform a site survey for a company that processes meat. Some areas are restricted due to high-security. What do you have to do in order to proceed with the sit...
- Question #142
Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?
- Question #143
When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect...
- Question #144
During your first pre-deployment meeting with the deployment team, you hand out the full design documentation to all of them. What's your primary goal during this meeting?
- Question #145
A controller-based WLAN infrastructure has its controller on a different subnet than its APs. What device must be used to enable any communication between the Controller and the AP...
- Question #146
In what circumstance would you not enable DFS channels on a WLAN infrastructure?
- Question #147
Aesthetics are very important in some environments. What common installation technique can be used to best meet this requirement in a stadium?
- Question #148
What kind of site survey helps you identify if roaming is working as designed?
- Question #149
When doing some frame capturing over the air during a voice call, you realized that frames on the downlink (from the AP to the client) direction are not being transmitted with the...
- Question #150
You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is...
- Question #151
During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band is intermittent. Every other time of the day, it works fine. What's the likely cause of thi...
- Question #152
After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet...