CWDP-302 Exam Questions

After surveying for the ideal mounting locations for APs, you have been asked to compromise RF propagation optimization due to aesthetic concerns raised by your customer. In the en...

When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?

One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the following information: - The central pa...

Which definition correctly describes the "local MAC" variation of the centralized WLAN architecture?

When a WLAN controller transmits an Ethernet frame that has an IEEE 802.11 frame as its payload to a lightweight AP, what type of QoS marks can be applied to the Ethernet frame and...

In a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed? (Choose 2)

Your customer location is equipped with DAS, originally deployed to relay a GSM signal indoors and provide 802.11 data coverage to static stations. What type of wireless applicatio...

According to WLAN security design best practices, what is true of the EAP properties shown in the exhibit?

Given: Use Exhibit 1, 2, and 3 to answer the question. The azimuth and elevation charts for which type of antenna are shown in Exhibit 1?

In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing 802.11b solution. You have chosen a dual-band 802.11n infrastructure prod...

You are selecting external antennas for use in a bridge link deployment. What chart should you request from the antenna vendors to make an accurate selection?

When a WLAN controller sends an 802.11 frame to a lightweight AP for transmission on the wireless medium, how does it mark the frame for 802.11 QoS priority?

What action should be taken after implementing a WLAN based on the design developed from the site survey process?

ABC Manufacturing has a heavily-used dual-band (2.4 / 5 GHz) WLAN, but sporadic RF interference across the 2.4 GHz band is causing dropped VoWiFi calls and leading to data connecti...

When you see the SKINNY protocol in a post-install validation protocol capture, what does this indicate?

What commonly causes a client-to-AP link imbalance?

When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be considered and configured in all affected WL...

Which one of the following is an essential metric to measure when performing a survey and design for VoIP across WLANs?

Given: In a site survey deliverable report, you are expected to explain the spectrum measurements taken at the customer's site. What portion of a spectrum analyzer view can be used...

You are creating an outdoor bridge link that spans more than 1000 yards. Which one of the following antenna types is more likely to be included in the design?

You are the WLAN designer for a new WLAN to be implemented in a retail environment. In the process, you must ensure that all requirements are defined and documented. Into what requ...

You are planning for client devices in a WLAN that is be upgraded to 802.11ac. Which one of the following devices is more likely to have support for 3x3:3 radios and 256 QAM?

What kind of applications has the character traits of many communications back and forth between the server and client for each transaction initiated by the user? For example, seve...

You must specify security requirements for a WLAN. Which one of the following solutions would best provide for real-time monitoring of the WLAN?

Which one of the following areas would introduce the greatest challenge in coverage when designing a WLAN?

You are planning an outdoor link. The link distance will be 1.3 miles (2.09 kilometers). Only two endpoints will be involved in the link. What kind of link should be created in eve...

When implementing an upgrade involving adding hardware to existing APs, what kind of upgrade is being deployed?

It has been determined that the highest data rate available in 802.11n (HT PHY) devices must be available. What modulation is required in this scenario?

When implementing a WLAN in a hospital environment, which one of the following is a common mistake made by designers?

What document helps to protect a consultant from legal action when designing a WLAN and performing site surveys?

What document might specify that RF propagation patterns, AP locations and configurations, and potential sources should be documented?

When defining the required number of Aps which one of the following will have the greatest impact?

You are performing a WLAN analysis process wherein you move through the environment and actively send and receive data to and from the AP and network. The statistics are gathered i...

iPerf is a tool used in site surveys and validation surveys for what purpose?

When performing a site survey in a secure facility, which one of the following is an important action?

You must determine the SNR of a particular signal. You know the RSSI. What additional metric is required?

You have been tasked with performing safety and operations training for outdoor bridge link installation. The antennas are to be installed on a 70-foot tower on one end and the roo...

What strategy can be used to ensure efficient cell overlap for VoIP site surveys?

You are implementing an outdoor client access WLAN. It will serve employees and guests. It must cover an area of approximately 100 meters by 60 meters. You expect to support only 1...

In general, when planning for a multi-floor installation, how should the APs be installed on each floor in relation to their locations? Choose the single best answer.

Which one of the following devices are least likely to cause interference for multiple clients of an 802.11 WLAN?

When planning for a VoIP WLAN installation, what metric is important and is often dealt with using buffers?

What might a PoE injector be used for during a site survey?

When testing the signal strength and capacity in a site survey, which client type is generally best to use?

ABC, Inc. has chosen a WLAN solution that implements a controller-based architecture. The APs will discover the controller using DHCP, broadcast messages, DNS resolution or some ot...

You are designing the implementation plan for a WLAN that requires each AP to be updated manually. The APs must be configured individually or through configuration loads and modifi...

You have enabled a feature in a controller-based environment that results in data arriving at the destination more quickly when sent through the APs. It also limits some other feat...

As part of the design for a large WLAN that will include hundreds of APs operating in both 2.4 GHz and 5 GHz bands, you are changing AP settings so that APs on the same channel are...

While designing a WLAN, it is important to create a channel plan that avoids or diminishes co- channel interface. A common mistake is to ensure little or no co-channel interference...

Which one of the following is a valid argument against using 80 MHz 8902.11ac channels?