CWDP-302 Exam Questions

One channel was added with the ratification of 802.11ac. What channel is this?

Which one of the following is the most effective way to determine if radar will force APs away from DFS channels?

Which one of the following scenarios is more likely to warrant the use of external antennas with an AP?

What should always be done before connecting an AP to the production network?

When installing a cloud-based AP, what is the most common process used?

When one AP among several in an ESS is elected to manage the others, what deployment model is in use?

All of the APs in the WLAN you have designed are using the same RF channel. You plan to add a VoIP network in the future that will include several more APs that all use the same RF...

When Kerberos is used as an authentication protocol, what network service is essential for authentication to succeed assuming the appropriate credentials are provided?

You have selected to plan and install a controller-based WLAN. The network consists of 53 Ethernet switches running all gigabit and higher ports. Twelve network segments exist sepa...

You have implemented a WLAN that uses a dedicated server to determine which connecting clients are actually allowed to access the network. With this server, even when clients authe...

You are designing security for a WLAN. You plan to use a RADIUS server that connects with an LDAP directory for user information. The EAPoL protocol will be used between the client...

You have connected an 8 port gigabit switch to four 802.11ac APs, each with 3x3:3 capabilities. You expect as many as 3 3x3:3 clients to connect to any of the APs at any given time...

You are powering an 802.11ac AP using PoE. The Ethernet cable has a 60 foot (18.3 meters) run. 802.3at is use. What is the maximum receive power the AP will have from the PoE cable...

What roaming technology uses stored keys at the APs for roam back if a client STA returns after having roamed away?

Which one of the following network design environments would be most likely to comply with a FIPS guideline?

You are using site software design features. You have imported a floor plan, but the simulated RF coverage is nowhere close to the real RF coverage you see with a walkabout. Given...

What action is commonly recommended in vendor design and deployment guides before placing an AP on production regardless of design specifications?

You are configuring an 802.11ac AP using manual channel planning. The design specification calls for the current AP to be placed on channel 56 in 5 GHz and to disable the 2.4 GHz r...

When using RAM, what must the AP do periodically to ensure that the current channel setting is optimal?

You are analyzing a WLAN/wired LAN implementation. You notice that DHCP option 82 is in use. What does this indicate?

When an AP cannot locate the WLC based on DNS or DHCP option 43, what other method may be used to locate the WLC?

When a virtual controller architecture is in use, with most vendor solutions, how is the virtual controller assigned?

You are validating a recently installed WLAN. You are performing throughput testing using multiple client STAs at the same time. What is the most likely purpose of this test?

During validation testing, it has been determined that you must add four additional APs on a floor and disable the 2.4 GHz radios in them. Which one of the following is the most li...

You are working with APs that support external antennas. One particular cell is experiencing link problems. It appears that several client devices have very low output power settin...

You are deploying a WLAN using controller-based technology. The APs are unable to locate the What action should you take on the network?

You are validating a WLAN and QoS settings. When performing a protocol capture, you see that QoS markings are accurate in the upstream from the client to the AP. They are also accu...

You are using a spectrum analyzer during the WLAN validation process. What is the best use, of those listed, for a spectrum analyzer at this phase?

When using a throughput tester, what protocol should be tested if you are concerned about VoIP call streams?

You have discovered three coverage holes during WLAN validation testing. All three exist on the same floor. Which one of the following is the best solution for coverage hole remova...