3605 Exam Questions

An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the Avaya 3605 Exam campus core. It has been determined that 10 Gigabit links are required to...

Which two functions describe VPFM? (Choose two.)

RSMLT Edge is enabled globally on two ERS 8800 switches. After recovering from a power outage some clients cannot communicate. A technician determined that only one of the core swi...

Which set of procedures will upgrade the boot monitor on an Ethernet Routing Switch (ERS) 8600 with a single 8692SF module?

The ERS 8000 backplane hosts an EEPROM for storage of up to 4096 MAC addresses. The MAC addresses are automatically used up as they are assigned to which three of the following? Av...

The Ethernet Routing Switch (ERS) 8600 supports the feature IP VPN-Lite that does not require the use of an MPLS network. Which function does the ERS 8600 as a Provider Edge (PE) p...

A customer is upgrading an existing ERS 8610 with the 8692SF to software version 7.x. Which statement regarding the upgrade is correct?

A technician is adding the Virtual link Aggregation Control Protocol (VLACP) configuration to a Converged Campus Solution where all Ethernet Routing Switches (ERSs) are directly co...

A technician discovers that an Ethernet Routing Switch (ERS) 8300 cat5e copper link is intermittent. The link connects a distant workstation to 8348GTX port 6/2. The cable path is...

Traceout allows a route to be traced to a network using an Ethernet Routing Switch (ERS) 8600 CLI command. In the command output, the possible range of `w' values is 1-255. The `w'...

What is Enterprise Policy Manager (EPM) used for in an Enterprise network?

When multiple VLANs are used, Dynamic Host Control protocol (DHCP) relay is required to get the DHCP information from the end user VLAN to the DHCP server. Which statement about ho...

The trace level 9 3 command accomplish? Avaya 3605 Exam

One of the benefits of the Ethernet Routing switch (ERS) 8300 switch is its ability to provide power- over-Ethernet (PoE). When implementing PoE on the ERS 8300 there are certain p...

When configuring an Ethernet Routing Switch (ERS) 8600 redundant Installation for warm standby, which protocol is used to give the fastest recalculation of large layer 3 topology b...

Fn Ethernet Routing Switch (ERS) 8300 configurations, which service class ensures that protocol updates such as RIP and OSPF are able to get out of a heavily congested switch?

An Information Technology organization needs to determine whether they should upgrade their existing Routing Switch (ERS) 8600 switches to release 5.0. Each chassis currently has b...

Before enabling IP Source Guard through Device Manager, which two conditions must be met on the system (Choose two)

A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF...

An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the campus core. It has determined that 10 Gigabit links are required to replace the existing...

Not long after bootup of an upgraded Ethernet Routing Switch (ERS) 8310, the system hangs. Which statement describes the cause of this problem? Avaya 3605 Exam

Which statement describe step in provisioning SPBM in an Enterprise network?

Syslog in the Ethernet Routing Switch (ERS) 8600 allows the mapping of ERS 8600 errors to be Specified to the facility Local 0 ?Local 7. What is another piece of information that s...

The goal of the Converged Campus architecture is to provide a highly reliable infrastructure with subscribed failover preventing any interruption of traffic on the network. What ar...

Based on the command line output shown in the exhibit, how many Gigabit Ethernet ports are available on this Ethernet Routing Switch (ERS) 8600? Avaya 3605 Exam

The technician is setting up an Ethernet Routing Switch (ERS) 8300 switch for QoS. It has been determined that unimportant traffic will be marked on the edge of the network with a...

Virtual forwarding eliminates the need for multiple physical routers. What is the difference in the Virtual Routing forwarding (VRF)-Lite configuration from Ethernet Routing switch...

A technician is setting up switch clustering using Split Multi-Link Trunking (SMLT). Which link is configured between the aggregation switches?

A technician is troubleshooting some IP telephones that are connected to an Ethernet Routing switch (ERS) 8300 8348TX-PWR I/O module. The IP telephones will not turn on. The 48V LE...

Which group of commands will configure Ethernet Routing Switch (ERS) 8600 to deny any source in the multicast group from reaching the multicast receivers connected to ERS 8600-B?

A technician has implemented Routed Split Multi-Link Trunking (RSMIT) edge design. After recovering power outage some clients could not communicate. It has been determined that onl...

While configuring packet capture Tool (PCAP), an Ethernet Routing Switch (ERS) 8600 switch has generated the following log: pcapAllocateBuffer: malloc(96 Mbs) failed Which event co...

Routed Split Multi-Link Trunking (RSMLT) is a way to ensure that traffic can be routed off the VLAN adding router redundancy. On which Ethernet Routing Switch (ERS) configuration c...

IPFIX is protocol used for the export of flow information from traffic observed on a switch. Which true for the functioning of the IPIX protocol? (Choose two.)

A campus network has been established with four Ethernet Routing Switch (ERS) 8600 switches in a switch cluster, two pairs with an Inter Switch Trunks (1ST) running Split Multi-Lin...

OSPF computes the shortest path to destination subnets, whereas, IS-IS, as used with SPMB works differently. Which parameter does IS-IS use to compute the path?

Which three functions describe VPFM? (Choose three.)

Config mlt 1 create name "MLT to Core" Config rmlt 1 add ports 3/8, 4/8 Config mlt 1 add vlan 1 Config mlt 1 perform-tagging enable ho mlt info 1 To add more links to this MLT setu...

A call centre is using the stacks of Ethernet Routing Switches (ERS) 5520-48T- PWR to supply power over Ethernet (PoE) to their IP telephones. Each switch is attached to 48 telepho...

Which commands will configure the labeled Ethernet ports appropriately?

Auto-negotiation should be enabled on all ports except under which condition?

A technician is configuring the core of a Converged Campus network, and is adding a backup- master configuration to an existing Virtual Router Redundancy Protocol (VRRP) configurat...

In the interaction between EAPO17802.1 and the Enterprise Policy Manager (EPM), what is the role EPM in the User-Based Policy (UBP) process?

A technician wants to control the routes being added to the routing table from the BGP routing table. Which statement describes how to do this?

In a multicast campus, when should the PIM interface in passive mode be configured?

A split Multi-Link Trunking (SMLT) for switch clustering is being configured. Which statement is a configuration requirement for the SMLT?

After issuing a show mit ist stats (CLI) or show ist stat (ACLI) command, it is determined that running type is normal MLT and not Inter Switch Trunks (IST). Which are two causes o...

A technician is configuring password levels on the Ethernet Routing Switch (ERS) 8600, and wants the manager to be able to view and edit device settings, but not to be able to chan...

After experiencing issues with XFPs, the show sys pluggable-optical-modules info CLI command is used to find that the switch does not recognize the XFPs. Which other method can be...

The exhibit indicates the two show commands from an edge Ethernet Routing Switch (ERS) 5520- 24T-PWR an untagged frame arrives on port 10.which is configured as an access port. To...