350-801 Exam Questions
580 real 350-801 exam questions with expert-verified answers and explanations. Page 1 of 12.
- Question #1On-Premises Call Control
Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?
MGCP GatewayCUCM IntegrationGateway Configurationccm-manager commands - Question #2Edge Services
Which two functionalities does Cisco Expressway provide in the Cisco collaboration architecture? (Choose two.)
Cisco ExpresswayRemote AccessFirewall TraversalB2B Communication - Question #3On-Premises Call Control
Which Cisco Unified Communications Manager service parameter should be enabled to disconnect a multiparty call when the call initiator hangs up?
CUCMAd Hoc ConferenceService ParametersCall Control - Question #4On-Premises Call Control
How many DNS SRV entries can be defined in the SIP trunk destination address field in Cisco Unified Communications Manager?
CUCMSIP TrunkDNS SRVConfiguration Limits - Question #5Collaboration Applications
Which description of the function of call handlers in Cisco Unity Connection is true?
Cisco Unity ConnectionCall HandlersAuto AttendantVoicemail - Question #6On-Premises Call Control
Refer to the exhibit. Endpoint A calls endpoint B. What is the only audio codec that can be used for the call?
Audio CodecsCodec NegotiationEndpoint Media Capabilities - Question #7On-Premises Call Control
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager. Which action should be taken when building a variable-length route patte...
CUCM Dial PlanRoute PatternsWildcardsInternational Dialing - Question #8On-Premises Call Control
Calls are being delivered to the end user in the globalized format. Where does an engineer configure the calling number into a localized format?
Calling Number TransformationLocalizationIP Phone DisplayCUCM - Question #9On-Premises Call Control
As a voice engineer, which two recommendations do you make to your company to optimize Cisco Unified Communications Manager configuration to reduce the number of toll fraud inciden...
Toll Fraud PreventionCUCM SecurityCalling Search SpaceCall Transfer Control - Question #10Infrastructure and Quality of Service
Why would we not include an end user's PC device in a QoS trust boundary?
QoS Trust BoundaryQoS MarkingTraffic PrioritizationUntrusted Devices - Question #11On-Premises Call Control
Which call routing pattern is used for phone numbers that are in the E.164 format?
Call RoutingE.164Route PatternsCUCM Patterns - Question #12On-Premises Call Control
When a user dials a number with a phone that is registered to the Cisco Unified Communications Manager, what is the default timeout before the number is sent?
CUCM Dial PlanInterdigit TimeoutCall ProcessingIP Phone Configuration - Question #13Infrastructure and Design
After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the Cisco Unified CM cluster exp...
NTPTime SynchronizationCUCM ClusterDatabase Replication - Question #14Collaboration Applications
A Cisco Unity Connection Administrator must set a voice mailbox so that it can be accessed from a secondary device. Which configuration on the voice mailbox makes this change?
Cisco Unity ConnectionVoice MailboxAlternate ExtensionsVoicemail Access - Question #15Protocols and Endpoints
Which configuration step is necessary for a Cisco SIP phone to synchronize its time with a specific source?
NTPTime SynchronizationCisco SIP PhoneCUCM Configuration - Question #16On-Premises Call Control
An engineer configures local route group names to simplify a dial plan. Where does the engineer set the route groups according to the local route group names that are configured?
CUCMDial PlanLocal Route GroupDevice Pool - Question #17Collaboration Applications
Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addre...
Unity ConnectionSIP IntegrationIPv4IPv6 - Question #18Media and QoS
What is a characteristic of video traffic that governs QoS requirements for video?
Video traffic characteristicsQoS requirementsVariable Bit Rate (VBR)Real-time media - Question #19Endpoints and User Management
A Cisco Telepresence SX80 suddenly has issues displaying main video to a display over HDMI. Which command can you use from the SX80 admin CLI to check the video output status to th...
Cisco SX80Video TroubleshootingCLI CommandsEndpoint Status - Question #20Protocols and Endpoints
Which two protocols does Cisco IM and Presence use to authenticate Jabber? (Choose two.)
Cisco JabberIM and PresenceAuthentication ProtocolsXMPP/SOAP - Question #21On-Premises Call Control
Which Cisco Unified communications manager configuration is required for SIP MWI integration?
SIP MWICUCM ConfigurationSIP TrunkVoice Messaging Integration - Question #22Protocols and Endpoints
An engineer encounters third-party devices that do not support Cisco Discovery Protocol. What must be configured on the network to allow device discovery?
LLDPDevice DiscoveryNetwork ProtocolsMulti-vendor - Question #23Media and QoS
A customer wants a video conference with five Cisco TelePresence IX5000 series system. Which media resource is necessary in the design to fully utilize the immersive functions?
Video ConferencingCisco Meeting ServerTelepresenceMedia Resources - Question #24On-Premises Call Control
How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off- hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?
CUCM Call ProcessingDigit AnalysisOn-hook DialingOff-hook Dialing - Question #25Infrastructure and Design
On which protocol and port combination does Cisco prime collaboration receive notifications (Traps and InformRequests) from several network devices in the collaboration infrastruct...
SNMPNetwork ManagementCisco Prime CollaborationUDP 162 - Question #26Infrastructure and Quality of Service
What is a valid class included in the 8-class QoS strategy in a VoIP network?
QoS8-class QoS modelVoIPAssured Forwarding - Question #27Infrastructure and Design
On which Cisco Unified Communications Manager nodes can the TFTP service be enabled?
CUCM ServicesTFTPCluster ArchitectureService Deployment - Question #28On-Premises Call Control
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?
SIP Route PatternCUCMCall RoutingConfiguration - Question #29Media and QoS
Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?
QoSDSCPMedia MarkingTraffic Classification - Question #30Voice Gateways and Session Border Controllers
Refer the exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?
ISDN PRIQ.921TroubleshootingVoice Gateway - Question #31On-Premises Call Control
Where is the default for maximum session Bit Rate for a region configured?
CUCMRegionsService ParametersBit Rate - Question #32Media and QoS
You are adding regions in Cisco Unified Communications Manager. Which codec(s) are selected when a call is placed if you set up the max audio bit rate to use 8 kbps?
CUCM RegionsVoice CodecsBandwidth ManagementMedia Bit Rate - Question #33On-Premises Call Control
How are E.164 called-party numbers normalized on a globalized call-routing environment is Cisco Unified Communications Manger?
Number NormalizationE.164CUCM Dial PlanCall Routing - Question #34Endpoints and User Management
A customer has Cisco Unity Connection that is integrated with LDAP. As a unity connection administrator, you have received a request to change the first name for VM user. Where mus...
Cisco Unity ConnectionLDAP IntegrationActive DirectoryUser Management - Question #35Endpoints and User Management
An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager. Which phone type must be selected?
Cisco JabberCUCM ConfigurationEndpoint TypesMobile Collaboration - Question #36Voice Gateways and Session Border Controllers
Which command in the MGCP gateway configuration defines the secondary Cisco Unified Communications Manager server?
MGCP GatewayCUCM RedundancyGateway ConfigurationCall Control - Question #37Endpoints and User Management
Which access control group is required on an end user to allow Jabber to do deskphone mode?
Cisco JabberDeskphone ControlCTIUser Access Control - Question #38Protocols and Endpoints
Refer to the exhibit. A call is failing to establish between two SIP Devices. The Called device answer with this SDP. Which SDP parameter causes this issue?
SIPSDPMedia NegotiationCall Troubleshooting - Question #39Voice Gateways and Session Border Controllers
An engineer is designing a high availability and failover solution for two Cisco Unified Border Element routers. The first router (cube 1.abc.com) takes 60% of the calls and the se...
DNS SRV recordsSIP load balancingCisco Unified Border Element (CUBE)High Availability - Question #41Protocols and Endpoints
Refer to the exhibit. Which option describes the security encryption status of this active call on a Cisco IP phone?
IP Phone SecurityCall EncryptionSRTPSIP TLS - Question #42Infrastructure and Design
Which design restriction applies to Cisco Unified Communications Manager Session Management Edition clustering over the WAN deployment with extended round-trip times in Cisco Unifi...
CUCM SMEWAN ClusteringSIP TrunksDesign Restrictions - Question #43Voice Gateways and Session Border Controllers
An administrator is trying to change the default LINECODE for a voice ISDN T1 PRI. Which command makes the change?
T1 PRILine CodingISDN ConfigurationCisco IOS Commands - Question #44On-Premises Call Control
How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E...
CUCM Service ParametersCalling Number DisplayNumber TransformationIP Phone Configuration - Question #45Infrastructure and Quality of Service
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device th...
CDPIP Phone QoSQoS Trust BoundarySwitch Port Configuration - Question #46On-Premises Call Control
An engineer configures Cisco Unified Communications Manager to prevent toll fraud. At which two point does the engineer block the pattern in Cisco Unified CM to complete this task?...
CUCM Dial PlanToll Fraud PreventionRoute PatternTranslation Pattern - Question #47Media and QoS
What is a software-based media resource that is provided by the Cisco IP Voice Streaming Application?
AnnunciatorMedia ResourcesCUCM ServicesVoice Streaming - Question #48On-Premises Call Control
Multiple route patterns match a number. How does Cisco Unified Communications Managers determine which pattern to use?
CUCM Call RoutingRoute Pattern MatchingDigit AnalysisLongest Match Algorithm - Question #49On-Premises Call Control
A user forwards a corporate number to an international number. What are two methods to prevent this forwarded call? (Choose two.)
Call ForwardingCalling Search Space (CSS)Forced Authorization Code (FAC)Call Routing Restrictions - Question #50Endpoints and User Management
An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit had reverted to its previous version. What must the ad...
Phone Load NameFirmware ManagementEndpoint ConfigurationCUCM Device Control - Question #51On-Premises Call Control
When a phone is registered over Mobile and Remote Access, where does it register?
Mobile and Remote Access (MRA)Cisco Unified Communications Manager (CUCM)Endpoint RegistrationCollaboration Architecture