350-040 Exam Questions

The Class 2 class of service always uses end-to-end acknowledgments (ACK, BSY or RJT) for every data frame. What else is true of Class 2?

You are looking at a trace for a FLOGI frame. If the FLOGI frame is an Extended Link Services request, what will be the value of the R_CTL field in the frame header?

In which of these situations will a fabric zone merge failure occur between fabric A and fabric B?

What is the function of the Link Reset Protocol within the Link Control Facility?

Which Fibre Channel class of service or classes of service can support F_BSY?

A host has just been implicitly logged off a fabric. Which two of these are possible primitive sequences that the host either transmitted or received? (Choose two.)

By default, what is the type of database in which Cisco Fabric Manager Server stores the inventory, fabric configuration, and states of ports in a SAN?

You have two dedicated 1-GB ports available on a 48-port line card. Which combination will result in no oversubscription for LT03 and LT04 tape drives?

Which CLI command would be used to validate that the user "userA" and the password "pa55word" can be authenticated by the TACACS+ server at IP address 172.18.125.111?

In a full mesh design, for which the "A" and "B" fabrics are connected by ISLs or port channels, which three of these are highly available? (Choose three.)

What will happen to host ports belonging to a VSAN that is moved to a suspended state?

Enabling persistent binding on an HBA provides which of these benefits?

What are the proper steps to enable a Cisco MDS switch to interoperate with a McDATA legacy switch running in McDATA Fabric 1.0 mode?

One of your customers has two Cisco MDS switches. MDS1 is a 9513 switch that is populated exclusively with Generation 2 line cards. MDS2 is a 9509 switch that is populated with Gen...

Cisco 350-040 Exam Which two of these are correct setups for capturing a PLOGI and a PLOGI Accept from a Fibre Channel target using SPAN? (Choose two.)

Which three types of backend databases are supported by Cisco FMS? (Choose three.)

What is the purpose of the SCSI Read Capacity command?

A Cisco MDS 9134 switch has which of these default FICON port allocation schemes?

A 24-port blade is added to an existing Generation 1 Cisco MDS 9509 switch with Generation 1 supervisors. All ports on the 24-port blade are in shared rate mode. Port 1/1 from an M...

A Brocade 12000 in its native corePID mode (1) is connected to VSAN 100 on a Cisco MDS. What is the correct output of the show vsan 100 command?

Cisco 350-040 Exam A customer needs a SAN extension for a distance of 200 kilometers for a mission-critical application. Assuming the customer owns the dark fibers between the two...

What is the purpose of the FICON CUP?

On a 48-port line card, the following command has been run. switch(config)# no rate-mode oversubscription-limit module 1 In port group 1, ports 1/1-1/3 are set to 4 GB dedicated an...

How can you configure the events within an RMON group using either Cisco Fabric Manager or Cisco Device Manager or both?

Which three of these statements about IVR service groups are correct? (Choose three.) Cisco 350-040 Exam

There are three different roles on a Cisco MDS switch. Role1 allows show commands only. Role2 allows debug and configure commands, and denies show commands. Role 3 permits VSANs 10...

You have three ISLs between two switches, a single host in VSAN 5 on switch A, and a single storage device on switch B in the same VSAN. What will be the effect on the ISLs if you...

Which two of these statements regarding SCSI Device Virtualization (SDV) are correct? (Choose two.)

A customer is running DMM and needs to apply a new Cisco SAN-OS version to the switches in both legs of a redundant fabric. The upgrades will be done on one fabric at a time. What...

One of your customers has a Cisco MDS 9513 switch with one 12-port line card, one 48-port line card, and seven 24-port line cards in it. The customer needs more ports. Which of the...

You are planning to connect two data center SANs that are located 200 km apart from each other. These data centers will need connectivity between each other for disaster recovery p...

On a Cisco MDS 9134 switch, how many ports are licensed by default? Cisco 350-040 Exam

What is the correct command syntax to restrain the transmission of SW-RSCNs over an ISL on a Cisco MDS 9509?

What LUN number is commonly used when a host issues a SCSI CDB Report LUNs query to a target?

What ordered set is used to determine the class of a frame?

There are three different roles on the MDS: Role1 allows show commands only. Role2 allows debug and configure commands, and denies show command. Role 3 permits VSAN 10-30 only. Use...

What is NOT a capability of RBAC in the MDS?

What is the correct configuration to place initiator ABC.iqn into VSANs 3 and 66 only?

Which are requirements to configure FCIP on a MDS FC Switch?

Given: Host-------MDS SwitchA-------------MDS switchB----------Storage Array with an FC Analyzer connected to Switch B What port types are required to be configured on the switches...

What command would be entered to restart VSAN 100 ?

You have a Host that needs to find all target devices that supports SCSI in the fabric. What is the D_ID of the frame to query for this information?

To capture all of the RSCN traffic originating from a standalone switch with no free ports, what should be utilized?

When using IVR traversing a FCIP link, what is not required?

What answer has the correct order of steps to configure QoS for Data Traffic?

FC protocol is a layered protocol consisting of several layers. Identify these layers in proper order of FC-0 to FC-4:

9509 has one IPS-8 line card installed in slot 1, and a 16-port line card installed in slot 3. What is the FICON port number of interface fc 3/3?

What settings would be required on a MDS9000 switch for proper use of a PAA? Cisco 350-040 Exam

What term is used to identify the special characters used in Fibre Channel Encoding?

Correct Fibre Channel Point to Point network topologies are::