350-040 Exam Questions
316 real 350-040 exam questions with expert-verified answers and explanations. Page 4 of 7.
- Question #151
For which two of these line cards is a software upgrade disruptive on all ports on the line card? (Choose two.)
- Question #152
Refer to the exhibit. The fabric containing Switch A (MDS 9513) is merging with the fabric Cisco 350-040 Exam containing Switch B (MDS 9222i). Which switch will become the principa...
- Question #153
You have a host with an HBA that can only be an N_Port. The Cisco MDS port was configured to connect to an F_Port. During the link initialization between the host and the MDS port,...
- Question #154
You connect an ISL link between Switch 1 and Switch 2. Which SW_ILS will be used to select the principal switch?
- Question #155
Host_A, Host_B, and Target_1 are all connected to a Cisco MDS fabric. When Target_1 was disconnected from the MDS switch, Host_A received an RSCN from the switch, but Host_B did no...
- Question #156
Which two of these statements about persistent FC-IDs for IVR are correct? (Choose two.)
- Question #157
In order to successfully enable Call Home, which one of these needs to be performed?
- Question #158
A customer environment has two separate fabrics, each with one Cisco MDS 9513 switch that has two VSANs configured on it (10 and 20). CFS is enabled for IVR on both fabrics. An IVR...
- Question #159
Which two of these statements about the Cisco MDS SAN-OS FCIP Tape Acceleration feature are correct? (Choose two.)
- Question #160
Which three of these Fibre Channel words are known as primitive signals? (Choose three.)
- Question #161
What set of primitive signals is valid for arbitrated loop?
- Question #162
If a Fibre Channel interface is receiving an NOS pattern on its interface, what pattern will the interface be transmitting?
- Question #163
All of these are functions of LIP except which one?
- Question #164
Which configuration command enables all discovered storage to be available for iSCSI?
- Question #165
What SW_ILS frame is used to perform principal switch selection?
- Question #166
Which events will trigger a port to start a Link Initialization Protocol procedure? (Choose two.)
- Question #167
Cisco 350-040 Exam The Domain Identifier Assigned (DIA) SW_ILS command indicates which two of these? (Choose two.)
- Question #168
Which two of these are effects of a BF SW_ILS? (Choose two.)
- Question #169
What are the correct configuration commands to enable Cisco SAN-OS FCIP Tape Acceleration and Read Acceleration for a given FCIP link?
- Question #170
What is the maximum number of equal cost paths for FCIP Tape Accelaration when using port channels, if channel protocol = off?
- Question #171
From where and to where are ESS SW_ILS frames addressed?
- Question #172
Which of these SCSI commands returns a list of logical unit numbers to which additional commands may be issued?
- Question #173
Which of these SCSI commands is used to determine the device type of a particular logical unit, and also may include basic information about implemented options and the device prod...
- Question #174
Which one of these statements is true of the iSCSI initiator task tag?
- Question #175
What is the maximum number of iSCSI and iSLB initiators and targets supported by a fabric?
- Question #176
SAN Extension Tuner requires which license feature?
- Question #177
Which two statements correctly describe FC-WA? (Choose two.) Cisco 350-040 Exam
- Question #178
Which two of these are used to reduce latency effects in SAN extension? (Choose two.)
- Question #179
Which two cards can be used for SAN extension? (Choose two.)
- Question #180
On a 24-port line card, each of three ports in a port group has 4 GB dedicated to it. No traffic is present. What bandwidth is available to the non-dedicated bandwidth ports in the...
- Question #181
Which three statements are true about a cascaded FICON topology? (Choose three.)
- Question #182
Which of these statements correctly describes the desired number of BB credits for a long- distance link of 100 km?
- Question #183
FC-SP is configured between two Cisco MDS switches. What will happen if the Fibre Channel ports for MDS1 and MDS2 have both been configured in "fc-sp auto-passive" mode?
- Question #184
You are connecting two existing independent fabrics in VSAN 2. Fabric 1 includes the domains 100 and 101. Fabric 2 includes the domains 100 and 101. All of the switches use the int...
- Question #185
Which of these can be derived from the output of the following command? (Choose two.) switch# show islb initiator configured iSCSI Node name is 10.1.1.2 Member of vsans: 10 Node WW...
- Question #186
Which statement about enabling fabric binding on Cisco MDS switches is correct?
- Question #187
On which of these are the feature licenses on a Cisco MDS switch based?
- Question #188
What must be eliminated to make migration of storage with a HP-UX host non-disruptive? Cisco 350-040 Exam
- Question #189
What must be eliminated to make migration of storage with a Windows 2003 server that has a redundant connection to two separate fabrics non-disruptive?
- Question #190
In the configuration interface gigabitethernet 2/3.100, what does the "100" refer to?
- Question #191
Which is the system-defined CLI variable?
- Question #192
What is used for in-band management of Cisco MDS switches?
- Question #193
Which protocol is supported on Cisco MDS GigE ports to allow the creation of Subinterfaces?
- Question #194
Which of these describe how Cisco Traffic Analyzer is used on a Cisco MDS switch? (Choose two.)
- Question #195
What is the best method of creating a highly available iSCSI infrastructure?
- Question #196
Which of these frames can be transmitted across an FCIP Link?
- Question #197
Refer to the exhibit. In order to achieve 13:1 oversubscription in this design, how many 1-GB hosts can be attached to the fabric?
- Question #198
A host has just been implicitly logged off a fabric. Which two of these are possible primitive sequences that the host either transmitted or received? (Choose two.)
- Question #199
Your application is very sensitive to performance fluctuation, both in the read phase and in the write phase. At the same time, you want to have some redundancy in your system to a...
- Question #200
You currently have one host and two target devices grouped into the same zone. The zone is part of the active zone set. When one of the target ports was removed from the switch, th...