300-620 Practice Questions

Refer to the exhibit. An engineer must set a policy to reuse the old password when changed after two days. Which action set accomplishes this goal?

Refer to the exhibit. The engineer is planning to configure in-band management for the Cisco ACI fabric. The goal is to allow the network operators to reach the Cisco APIC servers...

Which Cisco ACI setting corresponds to the VMware MAC pinning?

Which feature is used to program policy CAM on a leaf switch without sending traffic from VM to the leaf?

A company is implementing a new security policy to track system access, configuration, and changes. The network engineer must enable the log collection to track user login and logo...

An engineer configures port-12 on Leaf-101 and Leaf-102 to connect to a new server. SVR-12. The new server will belong to EPG-12 and use encap VLAN-1212. The engineer configured po...

Refer to the exhibit. An application called App_1 is hosted on the server called S1. A silent host application, App_2, is hosted on S2. Both applications use the same VLAN encapsul...

A Cisco ACI fabric has three different endpoints S1, S2, and S3. These endpoints must communicate with each other without contracts. These objects have been created in APIC: - Two...

What is a characteristic of a Cisco ACI Multi-Pod?

How many ARP requests are sent from leaf switches to perform host tracking for local endpoints?

What is the maximum number of sites connected using spine back-to-back with a direct link in a Cisco ACI Multi-Site fabric?

An engineer implements a configuration backup on the Cisco APIC. The backup job must meet these requirements: - The backup must transfer the encrypted data to the remote server. -...

What is the name of the automatically configured VLAN 3600 presented during Cisco ACI fabric discovery?

A Cisco ACI fabric must detect all silent endpoints for the Layer 3 bridge domain. Which actions accomplish this goal?

Which two hardware models are supported as fixed spine in Cisco ACI fabrics? (Choose two.)

Refer to the exhibit. An engineer created a local user named User on Cisco ACI. The engineer must configure the fabric so that the User can access only common and PROD tenants. Whi...

Refer to the exhibit. An engineer must disable the communication between the two backup servers in the backup EPG. Which action accomplishes this goal?

A Cisco ACI fabric contains 10 standalone leaf switches. An engineer must configure only the first two leaf switches in a VPC. Which VPC protection type must be configured to accom...

Which endpoint type is used when the entries are pushed down from the COOP database of the spine switches to the ACI leaf switches?

Refer to the exhibit. An engineer must configure a bridge domain inside the Cisco ACI fabric called BD. The configuration must permit EP2 and EP3 to reach EP1. Which configuration...

Refer to the exhibit. A legacy data center has a group of VLANs from 10 to 20 that must be migrated to the existing Cisco ACI fabric. The fabric must be configured such that the tr...

A Cisco ACI fabric is configured with these objects: - login domain named Domain_1 - TACACS+ provider group named Tacacs_ProvGro - TACACS+ server IP 10.43.145.1 Which action set al...

An engineer must configure an export policy that regularly backs up Cisco APIC configuration to a remote location. The backup must be sent by using a secure and encrypted protocol....

What is a characteristic of a Cisco ACI Multi-Site?

Which service graph option creates a permit entry for the traffic from the provider EPG to the provider connector of the PBR node?

Refer to the exhibit. An engineer configures connectivity for a bare metal server called SVR-15. EPG-15 is associated with a physical domain named phys_dom-15. The VPC member port...

Refer to the exhibit. A network engineer must configure a Cisco ACI fabric that meets these requirements: - The interface Eth1/2 must accept traffic only from EP2. - The interface...

What is the function of an HTTP GET request during Cisco ACI fabric discovery?

A Cisco ACI leaf node has received a Layer 2 frame from an unknown endpoint. The bridge domain is configured for Hardware Proxy. Which action will the ACI fabric take on the traffi...

Which log type provides information about configuration changes initiated by the user in the Cisco ACI fabric?

Which two settings are available in a Cisco ACI contract? (Choose two.)

Which device is the pervasive gateway shown installed on?

A network engineer is configuring syslogs in the Cisco ACI environment with these requirements: - All message severities must be logged except for debugging messages. - Messages mu...

Refer to the exhibit. A Cisco ACI fabric has an L3Out OSPF connectivity with router R1. The Cisco ACI fabric must have only subnet 192.168.1.0/24 installed in the routing table. Wh...

Which resolution immediacy setting allows a policy to be downloaded to the Cisco ACI leaf switch software regardless of CDP/LLDP neighborship?

Refer to the exhibit. A Cisco ACI fabric has four access policy groups. The VPC reciprocal protection group has been defined. The N9K1 trunks VLANs 10-20 to ACI leaf switches. Whic...

Which function does spine switch perform in the Cisco ACI fabric?

Refer to the exhibit. A company deployed Cisco ACI and plans to migrate the first servers to the Cisco ACI fabric. The current network setup experiences a small number of silent ho...

An EPG is associated with a VMM domain. Which option must be set to allow the bridge domain and the VRF of the EPG to be instantiated on all leaf switches that discovered the ESXi...

On which endpoint type is the host tracking feature performed in the Cisco ACI fabric?

A Cisco ACI fabric has detected EP1 with IP address 192.168.1.1 to MAC M1 on interface Eth1/1. The fabric is designed so that when EP1 is down, a new EP2 receives the same IP addre...

Refer to the exhibit. An engineer migrates a legacy data center to a new Cisco ACI fabric. The new deployment must raise a fault if a Layer 2 loop is detected from the external net...

Refer to the exhibit. A customer is running an application that collects data from multiple servers. The application does not support acknowledgments back to the servers. The custo...

A Cisco ACI fabric has L3Out using BGP with the maximum number of BGP prefixes configured as 1000. The fabric must raise the fault when 1001 prefixes are learned and the prefix 100...

Refer to the exhibit. Two L3Outs have been created under the same VRF. S1 must communicate only with external IP 128.10.24.32 through R2 and with all other IP addresses through R1....

Refer to the exhibit. A Cisco ACI administrator noticed a fault raised that affects the receipt of the external subnet. Which action clears the fault?

Refer to the exhibit. A network engineer must configure a Cisco ACI fabric for the External Bridged network to communicate with L3Out. Which action accomplishes this goal?

A Cisco ACI fabric must be integrated with a VMware vSphere environment. One of the ESXi hosts is still disconnected from the Distributed Virtual Switch (DVS) and the VMM domain. T...

Refer to the exhibit. A user tenant is configured with 10 application EPGs. An engineer must design the tenant to reject deploying a new application EPG. Which attribute set must b...

Which protocol must be used to securely export ACI configuration backup to a remote location?