300-365 Exam Questions
184 real 300-365 exam questions with expert-verified answers and explanations. Page 4 of 4.
- Question #154Mobility Deployment
An engineer must ensure that clients on an 802.1x WLAN can roam as fast as possible at a remote site that was deployed with FlexConnect. Which configuration ensures that this roami...
FlexConnect groupsfast roaming802.1xkey caching - Question #155Wireless Deployment
An engineer must ensure that a device that supports a limited number of channels in 5 GHz continues to function in selected areas of a stadium. Which action ensures that a limited...
RF profiles5 GHz channelsAP configurationstadium deployment - Question #156Wireless Deployment
On which AP radio or radios is Cisco WGB association and public safety supported?
WGBworkgroup bridgepublic safety4.9 GHz - Question #157Mobility Deployment
An engineer is configuring a deployment with these requirements: - Supports Cisco CMX - Supports licenses for at least 3000 APs - Supports 6000 wIPS licenses The engineer must ensu...
vMSECMXcapacity planningwIPS - Question #158Mobility Deployment
You plan to use Cisco Centralized Key Manager fast roaming with FlexConnect APs. Which configuration do you apply to minimize delays for real-time traffic while roaming?
FlexConnect groupsCCKMfast roamingreal-time traffic - Question #159Mobility Deployment
Which RTLS technique uses the nearest position of a client to an AP to track the location of the client?
RTLScell of originlocation trackingMSE - Question #160Wireless Troubleshooting and Optimization
In a converged access deployment with two Cisco Catalyst 3850 stacks, each operating as MC/MA, when a client attempts to roam between the Cisco Catalyst 3850 stacks, roaming fails....
converged accessinter-controller roamingVLAN configurationMC/MA - Question #161Wireless Deployment
An organization is planning on concerting remote offices to FlexConnect to centralize their Cisco WLCs. When preparing the Cisco ACLs for the new deployment, which three restrictio...
FlexConnect ACLsACL rulesFlexConnect deploymentaccess control - Question #162Wireless Deployment
Your network is designed as a three-tier network model that contains core, distribution, and access switches. QoS is implemented on the network. The access switch in a wiring close...
QoS trust boundarynetwork tierspacket classificationaccess layer - Question #163Wireless Deployment
Where is NBAR supported on the WLC?
NBARapplication visibilitycentral switchingWLC features - Question #164Wireless Troubleshooting and Optimization
You deploy a wireless network that supports location-based services. After the deployment, location accuracy is lower than expected. Which feature can you use to increase the locat...
location servicessite calibrationlocation accuracyMSE - Question #165Wireless Deployment
Which feature must be enabled on a WLC to ensure that ARP, DHCP, and data traffic can be forwarded to wired clients located behind non-Cisco workgroup bridges?
passive clientworkgroup bridgeWGBARP DHCP forwarding - Question #166Wireless Deployment
Which two multicast issues can be resolved by using VideoStream? (Choose two.)
VideoStreammulticastdata ratesQoS - Question #167Wireless Deployment
An enterprise has experienced several incidents of clients running out of IP addresses while in a stadium. Which kind of group can be implemented to help more clients access the ne...
FlexConnect groupsDHCP scopeshigh densityIP address management - Question #168Wireless Deployment
The Cisco Unified Wireless Product supports WMM. On which Wi-Fi Alliance interoperability standard is this based?
WMM802.11eQoSWi-Fi Alliance - Question #169Wireless Troubleshooting and Optimization
An engineer implements all remote sites using WLAN in FlexConnect with local authentication and the site experiences delays greater than 300 ms RTT. Which feature is disabled on th...
FlexConnectAAA overridelocal authenticationhigh latency RTT - Question #170Wireless Troubleshooting and Optimization
Your network has these characteristics: - CAC mode is set to load-based CAC - The bandwidth usage is between 75 and 85 percent - The reserved bandwidth for voice calls is exhausted...
load-based CACTSPECbandwidth reservationQoS admission control - Question #171Wireless Deployment
Which standard specifies TSPEC to provide the management link between higher QoS protocols and the channel access function?
TSPEC802.11eQoS standardschannel access - Question #172Wireless Deployment
An engineer enters the config wlan max-radio-clients 15 10 command on the WLC that houses all auditorium APs. Which configuration is being implemented?
WLC CLImax-radio-clientsclient limitWLAN configuration - Question #173Wireless Deployment
You have Microsoft Lync, which uses an 802.1p table instead of an 802.11e table for tagging the VoWiFi packets. Which configuration must be used to utilize the priority queue and p...
QoS trustDSCP802.1pVoWiFi Catalyst switch - Question #174Mobility Deployment
An engineer has deployed two Cisco 2504 WLCs to support the wireless network in two newly added buildings on a campus. The engineer puts 70 APs in the first building on one WLC and...
inter-controller roamingWLC designcontroller placementCisco 2504 - Question #175Wireless Troubleshooting and Optimization
Which CLI command does a wireless engineer use to display the maximum number of hops?
mesh networkinghop countWLC CLIshow commands - Question #176Mobility Deployment
What is a realistic way to minimize inter-controller roaming in a large multibuilding campus?
inter-controller roamingmobility groupcampus designcontroller assignment - Question #177Wireless Deployment
What is the maximum amount of DHCP scopes that can be created using the internal DHCP feature on a Cisco 5520 controller?
internal DHCPCisco 5520DHCP scopescontroller limits - Question #178Wireless Deployment
An engineer deployed a high-density design in an auditorium with interface groups. A subgroup of users needs a different interface group than the general group. Which setting takes...
AAA overrideinterface groupsVLAN assignmentpriority order - Question #179Wireless Troubleshooting and Optimization
Which impact of co-channel interference in WLANs is true?
co-channel interferencespectrumWLAN performancechannel planning - Question #180Wireless Troubleshooting and Optimization
A large number of clients are trying to stream an on-demand instruction in a large auditorium. Which two configuration changes on the WLC ensure that there is enough bandwidth to s...
QoS profiles80 MHz channelshigh densitybandwidth optimization - Question #181Wireless Deployment
What is the maximum number of monitor reports that can be created by using Cisco AVC and Cisco Prime Infrastructure?
Cisco AVCPrime Infrastructuremonitor reportsWLC management - Question #182Wireless Deployment
Which two Cisco access points support Receiver Start of Packet Detection Threshold? (Choose two.)
RX-SOPaccess point featuresAP 2600AP 2700 - Question #183Wireless Deployment
Which 802.11 standard is TSpec part of?
TSpec802.11eQoSwireless standards - Question #184Guest Access Deployment
You have multiple mDNS profiles defined on a Cisco Wireless LAN Controller for different user roles. Which two RADIUS attributes can be used on the ISE authorization profile to ass...
mDNSRADIUS attributesISE authorizationCisco AV pair - Question #185Wireless Deployment
What is the maximum number of AP groups a Cisco 5520 controller can support?
AP groupsCisco 5520WLC capacitycontroller limits - Question #186Wireless Deployment
Which type of message does a receiver application use to signal its intension to join a particular source by using SSM?
SSMIGMPv3multicastIGMP report - Question #187Guest Access Deployment
Refer to the exhibit. You have a user who has a device that publishes its own service. What is the user doing from the My Devices Portal?
ISE My Devices PortalmDNSdevice registrationBonjour