The AP has been configured property for a VoWLAN survey. The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?

The correct answer is A. -62 dBm. Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-9.html Cisco guidelines for deploying 802.11b/g/a VoWLAN handsets recommend a design where a minimum power of -67 dBm is present at the cell boundary (see Figure 9-10). This practice creates cell sizes that are smaller than…

WLAN Design

Question

Options

A-62 dBm
B-67 dBm
C-60 dBm
D-70 dBm

How the community answered

(23 responses)

A
83% (19)
B
4% (1)
C
9% (2)
D
4% (1)

Explanation

Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-9.html Cisco guidelines for deploying 802.11b/g/a VoWLAN handsets recommend a design where a minimum power of -67 dBm is present at the cell boundary (see Figure 9-10). This practice creates cell sizes that are smaller than those used in data WLAN designs of the past. The -67 dBm threshold is a general recommendation for achieving a packet error of one percent, which requires an SNR value of 25 dB or greater (local noise conditions impact this requirement).

Topics

#VoWLAN survey#cell edge#SNR#noise floor

Community Discussion

No community discussion yet for this question.

Full 300-360 Practice