nerdexam
BICSI

RCDD · Question #313

You are designing a multi-story dwelling and need to place the CTR's. Every floor is not available. What is the alternate spacing for the CTRs?

The correct answer is B. Every 3 floors. When every floor of a multi-story dwelling is not available for CTR placement, the standard permits an alternate spacing of every 3 floors rather than every floor.

Information Transport Systems (ITS) Distribution

Question

You are designing a multi-story dwelling and need to place the CTR's. Every floor is not available. What is the alternate spacing for the CTRs?

Options

  • AEvery 2 floors
  • BEvery 3 floors
  • CEvery 4 floors
  • DEvery 5 floors
  • E1st floor and midway up through the height of the building

How the community answered

(32 responses)
  • A
    3% (1)
  • B
    75% (24)
  • C
    13% (4)
  • D
    3% (1)
  • E
    6% (2)

Why each option

When every floor of a multi-story dwelling is not available for CTR placement, the standard permits an alternate spacing of every 3 floors rather than every floor.

AEvery 2 floors

Every 2 floors is acceptable spacing but the question asks for the alternate spacing defined by the standard, which specifically defines 3 floors as the maximum permitted interval.

BEvery 3 floorsCorrect

Telecommunications cabling standards for multi-dwelling units (MDUs) specify that consolidation/telecommunications rooms should ideally be placed on every floor, but when that is not feasible the maximum alternate spacing allowed is every 3 floors. This limit controls the maximum horizontal cable run length and maintains signal integrity to each served unit. Exceeding 3 floors risks violating maximum cable length requirements for the horizontal subsystem.

CEvery 4 floors

Every 4 floors exceeds the maximum alternate spacing permitted by telecommunications MDU cabling standards and would likely result in horizontal cable runs that exceed allowable length limits.

DEvery 5 floors

Every 5 floors far exceeds the permitted alternate spacing and would violate maximum horizontal cable distance requirements.

E1st floor and midway up through the height of the building

Placement at only the 1st floor and midway is an arbitrary approach not defined by the standard and does not account for consistent coverage across all floors.

Concept tested: MDU CTR alternate floor spacing requirement

Source: https://www.bicsi.org/standards/available-free-to-download

Topics

#CTR placement#multi-story dwelling#floor spacing#vertical distribution

Community Discussion

No community discussion yet for this question.

Full RCDD Practice